1, before going to work every day, observe the pneumatic combined two-piece water filter and oil mist device. If there is too much water, remove it in time, and if the oil level is not enough, refuel it in time;
2. Check the mechanical parts frequently in production to see whether the rotation and lifting are normal, whether there is any abnormality and whether the screws are loose;
3. Always check the grounding wire of the filling machine to ensure reliable contact; Wash the scale frequently; Check whether the pneumatic pipeline leaks and whether the trachea is broken;
4. Replace the lubricating oil (grease) for the deceleration motor every year, check the chain tightness and adjust the tension in time;
5, stop using for a long time, to empty the material in the pipeline;
6. Do a good job in cleaning and hygiene, keep the surface of the machine clean, often remove the accumulated materials on the scale body, and pay attention to keeping the electric control cabinet clean;
7. The sensor is a device with high precision, high density and high sensitivity. It is forbidden to bump and overload, and it is forbidden to touch when working, and it is forbidden to disassemble unless it is necessary for maintenance.