If the fresh graduates or just graduated 1 two years, you can say so (blow), no work experience can say school internship experience: summer vacation, in xxxx machinery manufacturing plant when the inspector, adjust the machine and according to the normal procedure to start the normal operation of the molded wood from the right end of the machine by the two sides of the limit plate and the middle of the conveyor rollers to promote into the machine under the internal. Then there are two conveyor wheels to drive the wood into the molding area, there are up and down the left and right 4 to 7 high-speed rotating knives at the same time on the wood for cutting edge molding. Finally, a soft conveyor on the left sends the semi-finished wood out of the machine. There is a powerful vacuum device beside the knives, and the cutting waste is sucked away by the vacuum port. The cut finished wood is relatively flat on all sides. It will be handed over to the next process, i.e. the wide belt sander.
Learn more about the electromechanical professional knowledge and engaged in a variety of equipment manufacturing, power generation equipment, transportation machinery, industrial products processing, various industries, such as the design and maintenance of automatic production lines, especially the design and maintenance of electromechanical systems. The division of labor and duties of this profession in different positions in society.