1. Go to the elevator,
Power failure,
Release the brake manually and look at the leveling mark, probably after leveling.
Then go to the corresponding floor and open the hall door and car door with the triangle key to let the trapped people out ~
2. Call the elevator maintenance and ask the personnel of the maintenance company to come to the scene to release the maintenance ~
Complex, formally speaking, the process is as follows:
Emergency rescue method of shear accident caused by abnormal operation of traction elevator and hydraulic elevator
(Open the door, take the car, take the car)
Scope of application: traction vertical elevator and hydraulic elevator.
Precautions:
A this appendix is for reference only. Please formulate corresponding emergency rescue methods according to the actual situation.
B members of the emergency rescue team shall hold the certificate of special equipment operators issued by the competent department of special equipment;
C. More than 2 rescuers;
D emergency rescue equipment and tools: emergency door unlocking key, disc wheel or turning gear, brake release device, hand hoist, common hardware tools, crowbar, jack, wire rope sleeve, wire rope splint, lighting equipment, communication equipment, address book of emergency organizations within the unit, safety protection equipment, warning signs, etc.
E ensure your own safety during rescue.
0. General rules
0. 1 Disconnect the main switch of the elevator first, so as to avoid an accident caused by the sudden restoration of power supply during rescue.
0.2 At the same time, immediately notify 120 emergency center so that the emergency center can take corresponding actions.
1. Emergency rescue process of shear accident caused by abnormal door opening operation of elevator.
1. 1 In the following cases, rescue can be carried out before the arrival of professional emergency personnel on 120, otherwise it will be handled as 1.2:
A. First aid will not cause further harm to the injured;
B. there are enough rescuers;
1. 1. 1 If people in the car or passengers at the landing are cut when entering or leaving the car;
1. 1. 1 If passengers can be rescued by directly opening the elevator door, on the premise of ensuring safety, use the landing door unlocking key to open the corresponding landing door to rescue the trapped passengers.
1. 1. 1.2 If the elevator door cannot be opened with the landing door unlocking key, then:
1.1.1.2.1Relevant personnel shall stay on the floor where the injured passenger is located, and relevant personnel shall carry out turning rescue or emergency electrical operations, and keep in touch with the personnel on the floor where the injured passenger is located. Once the injured passengers can be rescued, they should stop turning to rescue operations or emergency electric operations.
1. 1. 1.2.2 On the premise of ensuring safety, use the landing door unlocking key to open the corresponding landing door and rescue the trapped passengers.
1. 1. 1.3 After the passengers are rescued, proceed with the next rescue work according to the instructions of 120 emergency personnel.
1. 1.2 If passengers or other personnel are cut when they are not getting on or off, that is, the bottom or top of the car is cut, then:
1. 1.2. 1 When the vehicle bottom is sheared,
1. 1.2. 1 The corresponding personnel stay on the floor where the injured passenger is located, and the corresponding personnel carry out turning rescue or emergency electric operation (move the car upward), and keep in touch with the personnel staying on the floor where the injured passenger is located. Once the injured passenger can be rescued, the steering rescue operation or emergency electric operation will stop.
1. 1.2. 1.2 After the passengers are rescued, carry out the next rescue work according to the instructions of 120 emergency personnel.
1. 1.2.2 When the car roof is sheared:
1. 1.2.2.65438+
After the passengers are rescued by 1. 1.2.2, proceed to the next rescue work according to the instructions of 120 emergency personnel.
1.2 If 120 professional emergency personnel are not suitable for rescue before arrival, then:
1.2. 1 According to the instructions of 120 emergency personnel, make preliminary rescue preparations.
1.2.2 cooperation 120 rescue work after the arrival of emergency personnel.
2. Emergency rescue process of shear accident caused by abnormal elevator operation.
2. 1 Under the following circumstances, the rescue can be carried out before the arrival of 120 professional emergency personnel, otherwise it will be handled as 1.2:
A rescue will not cause further harm to the injured;
B. there are enough rescuers.
2.2 press 1. 1.2 to operate.
3. Rescue methods for people injured or trapped by "opening the door and moving the car" when the hydraulic elevator is not working normally.
3. 1 After the emergency rescue personnel arrive at the scene, if it is determined that there is no power failure, 1 emergency rescue personnel go to the computer room to open the control cabinet to observe the fault point, and notify other emergency rescue personnel to observe the situation through the intercom.
3.2 After the emergency rescue personnel arrive at the scene, they shall implement Article 6 of the General Rules (that is, talk with the personnel in the car to understand the situation and appease the trapped personnel).
3.3 The emergency rescue personnel in the computer room told the control cabinet in the computer room to pull down the main power supply after observation to prevent accidents during the rescue.
3.4 Emergency rescue personnel in the door area use the elevator-specific landing door unlocking key to open the landing door, and directly talk to the trapped people to appease them. Determine the moving direction of the car, and notify the emergency rescue personnel in the machine room to work through the intercom.
3.5 When approaching the nearest flat floor "downwards", the emergency rescue personnel in the machine room can press the "pressure relief button" of the pump station "inching" to observe the change of the pressure gauge and contact the emergency rescue personnel at the landing door through the intercom. When "going up" to the nearest flat floor, the emergency rescue personnel in the machine room can use the "pressure bar" to be pressurized by the manual pump, observe the change of the pressure gauge, and contact the emergency rescue personnel at the landing door through the intercom.
3.6 When approaching the nearest horizontal floor "downward", the car should slowly descend to the horizontal floor area to release the trapped people. When approaching the flat floor "upward", the car should slowly rise to the flat floor area to release the trapped people.
3.7 If there are injured or unwell people among the trapped people, emergency rescue personnel should contact medical rescue in time and send them to the hospital for treatment.
3.8 Emergency rescue personnel check the "PLC or microcomputer board door lock output point"; "Whether the main contactor is bonded"; "Pumping station solenoid valve"; "PLC or microcomputer board contacts downwards"; "Broken balance pipe or tubing", etc. , replace or adjust parts.
3.9 Emergency rescue personnel should reset after determining and eliminating the fault point, and make on-site records.
3. 10 Emergency rescue personnel run the elevator all the time (repeatedly) and notify the user after confirming that there is no abnormality.
3. 1 1 The emergency rescue command center office reports the corrective and preventive measures of the accident.
4. Fill in the emergency rescue records and file them.