What is fluorocarbon paint?

Fluorocarbon coatings are coatings in which fluorine resin is the main film-forming substance; they are also known as fluorocarbon paints, fluorine coatings, fluorine resin coatings and so on. Among the various coatings, fluorine resin coatings have particularly superior properties due to the introduction of fluorine element electronegativity and strong carbon-fluorine bonding. Weather resistance, heat resistance, low temperature resistance, chemical resistance, but also has a unique non-stick and low friction. After decades of rapid development, fluorine coatings have been widely used in various fields of construction, chemical industry, electrical and electronic industry, machinery industry, aerospace industry and household products. It has become the paint brand with the highest comprehensive performance after acrylic coatings, polyurethane coatings, silicone coatings and other high-performance coatings. At present, the more widely used fluorine resin coatings are mainly PTFE, PVDF, PEVE and other three major types.

(I) technical characteristics

1, coating durability: fluorocarbon resin emulsion plus metal aluminum powder synthesized fluorocarbon metal paint than ordinary silicone propylene or acrylic resin emulsion synthesized metal paint, in the durability (i.e., aging resistance) has been greatly improved, called ultra-durable coatings.

2, no top coat protection: due to fluorocarbon paint in the resistance to acid and alkali, ultraviolet radiation, weathering, water resistance, anti-static properties of many aspects of the performance of the improvement, so its coating has been no need to protect the top coat, in the process of spraying the metal paint can be no longer after applying the top coat.

3, more prominent metal luster: the purpose of the metallic paint must have a metallic luster, otherwise it will lose its meaning. Because of the fluorocarbon metallic paint emulsion transparency is more pure, higher, so the degree of metal will be easier to show.

(B) Precautions

1, construction temperature 0-35 ℃, the base surface temperature is best not less than 5 ℃.

2, material storage should pay attention to moisture-proof, waterproof, anti-direct sunlight.

3, gloss consistent, do not allow hanging, leakage coating.

4, the amount of each ingredient should not be too much, in order to avoid a long period of time to avoid standing, resulting in curing.

5, be sure to use the special supporting accessories, strictly prohibited water, banana water, alcohol, gasoline and so on.

6, in the humidity below 85%, the temperature 0-35 ℃ is appropriate, do not construct under the following conditions: rain, snow, fog, frost, wind, or relative humidity of 85% or more.

7, room temperature after painting the film can be fully cured about 7d, it is recommended not to use in advance.

8, safety measures and preventive methods: to ensure good ventilation, wear protective gear to prevent staining of the skin, eyes. If the paint splashes into the eyes, please flush with water and consult a doctor immediately. Construction environment is strictly prohibited fireworks.

9, the cost is much lower than aluminum composite panel, and can achieve the same effect;

10, light weight, will not bring a heavy burden on the wall, there is no danger of aluminum composite panel falling. Professional production, environmental protection, factory direct sales, technical support. Can be color-matched according to your needs.

11, blended fluorocarbon paint coating must be used up within 5 hours to avoid more than the activation period for scrap.

12, the fluorocarbon paint should be placed in a dry, waterproof, leak-proof, sunscreen, high temperature, away from sources of ignition.

13, after opening the can, use it after filtering with 120-200 mesh.

/link?url=u4FWYBDijPG6NSnC8hcqJ1DZwglXuOo717ZvMmAlM5j-n8u36utpQ2gzdWNvLWXcubgwMVGWf32wSy2MZgqYLWV3JTKinnN3GTukDMpdxs3cVS- XYYW6WWwiX5vFPIn41PiCYNVnvr4hLvVMAnuyXBx0XzUhH-kId-X1U9bGK_G#5