With the collector electronic moisture-proof box is very good! I'm using Oh, Taobao on the sale and transportation are wooden bar reinforced freight? Want to ask me where to buy can add my buckle?385411208
1. Power saving, and there is a certain moisture-proof function of the blackout?
Because the drying material does not consume electricity to absorb moisture (only regeneration of moisture when using electricity), and the drying material of a large number of capillary channels to absorb moisture almost never saturated, so even if the power outage can also maintain a certain dehumidification function. This is very important for the electronic moisture-proof box in an airtight cabinet dehumidification, because if the power outage on the complete loss of moisture-proof function will be in the airtight cabinet caused by a serious anti-damping problem, more damage to the object.2.? Room temperature dehumidification, no thermal mass change problem, there is no temperature difference junction water problem, wet and cold winter also have good dehumidification power?
There is almost no thermal effect on the moisture absorption and discharge of drying materials, so heat-sensitive objects will not be damaged, and there will be no water phenomenon due to temperature differences in the objects (e.g., when the objects are taken out of the refrigerator/oven, the water phenomenon occurs due to the difference in the temperature of the environment and the water phenomenon in the objects); since it does not rely on the difference in the temperature of the cold condensation of the water to remove the wet (e.g., the frozen wafer / dehumidifier dehumidifiers), therefore, even in the cold and humid winters, it will not affect its dehumidification due to the difference in temperature becomes smaller. The temperature difference will not affect its dehumidifying power.
3. Atmospheric dehumidification, without the complexity of vacuuming/filling with N2 dry air, etc.
There is no need for a vacuum or N2 dry air.
So the object can be placed in the general cabinet like switching access to use, very convenient, no consumption of gas, pulling the pipeline, control?
There is no need to consume gas, pull piping, control pressure/flow, and other complex issues.
4. The drying material can be regenerated to repeat the cycle of moisture absorption use, do not have to replace, supplemented by sophisticated design, and achieve fully automatic dehumidification / humidity control function?
These drying materials can be used repeatedly without replacement, and most of them have proven their durability and safety after a century of practical use.
These drying materials can be used repeatedly without replacement, most of which have been proven to be durable and safe over the past hundred years, supplemented by precise ceramic (PTC) automatic heating regeneration device and shape memory alloy precision micro-mechanical valve switch inlet and outlet control, to achieve fully automatic, power-saving, mute, low-fault dehumidification / humidity control function.
5. All-around dehumidification/control capability?
Through the dry material formula/surface area moisture absorption and drainage using the exclusive Know?How, you can develop different dehumidification mainframe
(1) 35~55%RH balanced dehumidification mainframe. (iBox Home Moisture Protection Series) (2)25~55%RH and slow and stable balanced dehumidification and humidity control mainframe. (Standard Turbo upgrade series) (3) Turbo dehumidification host, in addition to retaining the functions of (2), there is a rapid humidity reduction Mode and <20%RH dehumidification limit capacity. (Turbo moisture series) (4) Fast super low humidity <10%RH, <5%RH, <1%RH, 3Omin?Recovery?time and a variety of room temperature drying and dehumidification capabilities. (Fast?Super?Dryer)? Completely solves the four major moisture problems of mold, oxidation, deterioration, defective rate, etc. produced by absorbing moisture.6. This technology can be made into a variety of electronic moisture-proof box (cabinet)?
All kinds of use of automatic moisture cabinets (such as closet, shoe cabinets, audio-visual cabinets, gun cabinets, medicine cabinets, specimen cabinets, musical instrument cabinets ...), room temperature, rapid ultra-low humidity electronic drying equipment and space moisture planning project.7. The world's largest electronic moisture leading brands have adopted this technology and established a good reputation with more than one million users?
Optical lenses:
From the life of the camera / DC / DV; to work with a variety of professional cameras / cameras / telescopes / microscopes, a variety of expensive and sophisticated optical measurement, testing, detection, medical diagnosis, automated production and other related instruments / equipment / supplies ... there will be these moisture will absorb moisture moldy lens.
According to Japan's photo industry experiments, precision optical lenses on the Optical?Coating long-term adsorption of moisture is easy to grow mold, especially in the environment above 60% RH, once the lens is moldy, the naked eye is not easy to detect, even if sent for repair, but also can not restore the original sharpness, resulting in filming/testing/research on the bias and repair, re-purchase on the loss of the?
Necessary fully automatic humidity control at 30~50%RH.