Picosecond radium utilizes a very short pulse output, using the benefits of photomechanical shockwave to replace the thermal effect, crushing the target into the smallest particles and minimizing the side effects of the photothermal effect, which can be achieved by virtually solving all kinds of pigmentation spots.
Picosecond laser can even make the skin back to the spring, the chance of hyperpigmentation is reduced. If you compare pigment particles to rocks, a conventional laser can break them down to pebble size, while a picosecond laser can break them down to a dusty state.
At the same time, the chances of immediate hyperpigmentation are greatly reduced because of less thermal damage. It is characterized by picosecond ultra-short pulse width, adjustable repetition frequency and high pulse energy.
In the field of biomedicine, optical parametric oscillation, biological micro-imaging and other fields have an increasingly wide range of applications, and gradually become an increasingly important tool in the modern bio-imaging and analysis system. Due to the laser has a variety of outstanding features, and therefore was quickly used in industry, agriculture, precision measurement and detection, communications and information processing, medical, military and other aspects, and in many areas caused by a revolutionary breakthrough.
What is the difference between picoseconds and cellular picoseconds?
The difference between honeycomb picoseconds and traditional ordinary picoseconds laser is mainly 3 points as follows:
1. Pigment absorption of light energy:
Ordinary picoseconds laser, the color of the darker and heavier can only be absorbed;
Beehive picoseconds laser, the unique 755 wavelength is specifically designed to target the lighter color of the dark *** pigment, so that the spots have no place to run away.
2. Reaction after pigment blasting:
Ordinary picosecond laser, although the pigment fades a little bit, but due to the larger pigment particles, it is not easy to be absorbed and metabolized by the human body;
Beehive picosecond laser, since the picosecond laser joined the Beehive system in 2015, it is able to target the pigment more accurately and use its unique picosecond time, the high peak value of the short pulse, which will Pigment broken into fine particles, better effect, more easily absorbed by the body metabolism honeycomb picosecond laser, honeycomb picosecond effect.
3. Customers applicable sense:
Ordinary picosecond laser, whether it is a coal washer, or tuned Q laser, friends who have done it know that not only is it very painful, but also the skin damage is larger, it will bleed, and it is easy to anti-hacking;
Beehive picosecond laser, slight pain, skin damage is small, it is not easy to bleed, not easy to anti-hacking.
Picosecond laser and honeycomb picosecond laser related knowledge is as follows:
1. Picosecond laser, that is, each laser emits a pulse duration (pulse width) to reach the level of picoseconds of laser. One pulse width of picosecond laser is 750 picoseconds, and the light can only penetrate 22 centimeters, which is only equivalent to the length of a 600 ml plastic Coke bottle - that is to say, per unit of time, picosecond laser penetrates a very, very short distance, which means that the stronger the selectivity of the treatment, the higher the safety, and the shorter the number of times of treatment, the more effective the treatment can be! produce stronger efficacy!
2. Honeycomb picosecond laser, is in this original picosecond laser energy based on the addition of the honeycomb lens, honeycomb lens will be hundreds of times the amplification of this function, which will be each beam of laser refocusing to generate hundreds of new laser points, and with the original 20 times the power, in the deep layers of the skin to form millions of or even more "empty holes! It creates millions or even more "holes" in the deeper layers of the skin with 20 times the power of the original, breaking down pigmented cells or loose aged cells, broken elastic fibers, and then our body will start the regeneration and repair mechanism, with a large number of new collagen and elastic fibers, which restores the skin's firmness and elasticity.
What is the difference between picoseconds and photorejuvenation
The biggest difference is that picoseconds are more singular, while photorejuvenation procedures are more functional.
Picosecond laser, not only allows people to painlessly treat the skin spots, but also the treatment of the instrumentation is more advanced than it spot removal equipment, the effect is good, safe, usually after two to three times, can all remove the facial skin spots.
The difference between photorejuvenation lies in the fact that photorejuvenation is an advanced high-tech cosmetic project, using a specific broad-spectrum color light, directly irradiated on the surface of the skin, which can penetrate to the deep layers of the skin, selective action on the subcutaneous pigment or blood vessels, decomposition of pigmentation, closure of abnormal capillaries, while photons can also *** subcutaneous collagen proliferation.
Extended Information
Advantages and Functions of Picoseconds
Picoseconds Laser utilizes the output of extremely short pulses, using the benefits of photomechanical shockwave to replace the thermal effect, crushing the target into the smallest particles and minimizing the side effects of the photothermal effect, which can achieve the purpose of solving virtually all kinds of pigmentation spots.
At the same time, because the thermal damage becomes smaller, the chance of spontaneous pigmentation is also greatly reduced. At the same time, the scope of application is wide, a treatment can improve a variety of facial problems at the same time.
Advantages of photorejuvenation
Its function is to eliminate and lighten various pigmentation spots on the skin, enhance the elasticity of the skin, eliminate fine wrinkles, improve the dilation of the facial capillaries, improve the facial pores and skin roughness, and also improve the yellowing skin color.
1, photorejuvenation in the treatment, the candidate will not feel any pain, completely minimally invasive treatment, and there will not be any side effects after the operation, is very safe.
2, photorejuvenation has an absolute advantage in time, not only in the treatment process, or after the treatment requires less time, a treatment of about half an hour, after the operation does not require too much time care, will not have any impact on life.
3, photorejuvenation treatment effect is lasting, for the skin of small problems in the soon after the solution, the general will not recur.