First, the four corners of the disinfection cabinet door of the integrated stove are not sharp, so it is not easy to cut your hand.
At this time, you can go to the integrated stove stores of other brands in the market to have a look and see if these four corners of their products are as sharp as knives, and if you are not careful, you will cut your hand and scratch your hand. In addition to the special price machine, the disinfection cabinet door of Guangxi Shixing integrated stove is all wrapped in stainless steel (or all-aluminum gold), and the four corners are polished at the same time, which is smooth and sharp and will not cut hands at all. Even if the special machine doesn't cover the cabinet door, the sharp part is polished. The first step of Shixing workshop is to polish the four corners, and then assemble the cupboard door.
Second, the guide rail of the integrated stove disinfection cabinet is overturned, which is not sharp and not easy to cut hands.
Many of the guide rails of the disinfection cabinet are not turned up or polished, so it is easy to hurt your hands to the touch. Shixing integrated stove pays more attention to this point and makes the guide rail flanging and polishing process. After all, the integrated stove is a tall product, and the price is more expensive than the traditional three-piece range hood, which costs tens of thousands of yuan. Shixing integrated stove should do its best to do an integrated stove and achieve the best cost performance.
Thirdly, the perforated basket of the integrated stove disinfection cabinet is turned and polished, which is not sharp and not easy to hurt hands.
At present, there are two kinds of baskets of integrated stove disinfection cabinet: steel wire basket and stainless steel stamping basket. The steel wire basket is of low grade, chopsticks and spoons are easy to fall into the bottom of the basket when put in, and they can't be taken out for a long time, which makes people feel that it is not worth so much money. The stainless steel stamping basket gives people a heavy feeling and uses more materials, so chopsticks and spoons are not easy to fall in. If you spend 10000 yuan to buy an integrated stove and find it is a steel wire basket when you come home, I also spend 10000 yuan to buy an integrated stove and find it is a perforated basket, you will be amazed at my beauty!
Shixing integrated stove doesn't use steel wire to pull baskets very much. The new models are basically stamping baskets, which are also divided into one or two layers. Special machines usually have only one floor, while non-special machines use double-layer stamping basket. After punching, the bottom edge of the punching basket is as sharp as a blade. When punching Shixing integrated stove, there are two more processes: one is flanging, and the other is grinding, so that the washed basket after flanging and grinding is not easy to cut hands.
Fourthly, the inner lining board of the integrated stove disinfection cabinet door is bent, and the stainless steel plate is embedded without screws, which is stable and beautiful.
Earlier disinfection cabinets were generally sprayed with cold-rolled steel plates, which was a relatively low-end practice. Since the national environmental protection policy came down, the cost of spraying or painting has increased. At present, many brands no longer adopt this low-end approach. At present, the inner lining board of Shixing integrated stove disinfection cabinet adopts stainless steel plate, which is embedded by bending. The whole board is stable and beautiful without screws embedded. You can't see the fixing screws on it. If there are screws, they are used to install the handle. However, the inner container of the disinfection cabinet of some brands of integrated stoves is relatively rough, and there are many screws in it, which are not graded after opening.
Fifth, the front windshield of the integrated stove is simple in design and smooth in disassembly and assembly.
The front windshield of the first and second generation integrated stoves is fixed and can't be put away. Since the third generation integrated stove, everyone has basically designed this board to be easy to disassemble and install for cleaning, but there are several ways to disassemble and install it. Some of them are difficult to disassemble and install, and they can't be disassembled and installed for a long time. It is more convenient to build an integrated stove. First pull the windshield out of the head, then lift it in the direction of the board, and it's OK. When installing, insert it in the direction of the board first, and then buckle it inside, and it will be fine.
Sixth, tempered glass plate (commonly known as condensation plate in the industry) is installed in the smoking cavity of integrated stove, which is convenient for condensing oil (cooling and liquefying oil fume into oil), non-stick and easy to clean.
Generally speaking, an integrated stove with a retail price of 7,000 yuan should be equipped with such a condensing plate. If the manufacturer is unwilling to install this condenser plate, it is stingy, just like spending 200 thousand on a car without a skylight. It should be noted that if this plate is not attached, after two or three years of use, the stainless steel in the inner cavity of the integrated stove will turn yellow and cannot be cleaned. An integrated stove with a flap at the air inlet or an integrated stove with a Teflon spray net will be better. If you can't see the yellow of the inner cavity, it will cover up the ugliness, and other machines will become ugly. The price of 7000 yuan is sorry! Even if the air inlet has a flap or a mesh plate, it is not as good as the tempered glass condensation plate: it is non-stick and easy to clean, and the cavity will not turn yellow after years of use.
Therefore, the author believes that as long as you buy an integrated stove, you must first look at whether there is this condensation plate in the inner cavity of the integrated stove. If not, I won't buy it! For example, if there is no skylight at the price of 200,000, don't buy it.
Seventh, the connection between the head and the bottom of the integrated stove is nested by columns, so that the head will not loosen or shake after installation.
Looking at the whole integrated stove market, basically the connection between the head and the bottom of the integrated stove is not stable enough, and the head is loose and wobbly, which is a bit like a tumbler placed on it. The author has been in the integrated stove market for a long time and found that 99% of the machines are like this.
At that time, in order to change this situation, Shixing integrated stove studied and designed the nesting mode of columns (piles) connecting the head and the bottom with reference to the design principle of a medical instrument, just like a sleeve tightly covering the upper and lower parts, which gives people a sense of stability and texture no matter how it shakes.
Eighth, the stove head of the integrated stove is connected to the bottom of the power supply cable through the socket, which is simple and convenient to connect and has a high grade.
At present, more than 99% of integrated stoves use a small white button to buckle up and down the power cord, which is relatively thin, and even the cord of some stingy manufacturers is too short to connect.
Shixing integrated stove is equipped with a thick socket at the bottom and a plug at the head power cord. It is very convenient to connect the two. As long as it is plugged in, it looks generous and safe.
Nine, integrated stove guide rail external, thick and powerful, heavy bearing, smooth push and pull.
If the guide rail of the integrated stove disinfection cabinet is placed in the disinfection cabinet (built-in guide rail), the friction of the guide rail will more or less make steel chips or oil stains fall into the disinfection cabinet, and the guide rail will experience high temperature "suffering" during disinfection, which is easy to rust and age and worsen the friction coefficient.
Xinshixing integrated stove is not. Put the guide rail outside the disinfection cabinet and thicken the guide rail so that it can bear 300 kilograms. Although some people say, "No need, who will put so many dishes?" If you can only bear 50 kg, I'm afraid it's an expensive integrated stove. Just like a car with a design top speed of 200 km/h, who drives so fast?
Tenth, the switch board of the integrated stove is installed on the table glass, which is simple to operate and does not need to bend over to find the key.
When you set the settings such as timing, disinfection, and air change on the integrated stove, it will be very inconvenient if you have to bend down to look at the switch board every time. Tired of doing housework, I often bow my head like this.
Shixing integrated stove is convenient for users, and the switch board is designed on the panel of integrated stove, so users can operate it in front, which is very convenient and fast.
These details are very important for the integrated stove. It should be noted that the success or failure of the product lies in the details. The details are not blown out, but actually made. It is hoped that fashionable integrated stove products will further upgrade their technology and lead the development of integrated stove industry in more details.