A, Taizhou plant decoration design price
1, plant design price
In Taizhou plant design price is generally about 10-20 yuan per square meter, its design difficulty and workload is related. For example, a simple plant, its internal simple mechanical ventilation and heating, so that the workload of a single HVAC is relatively small, the difficulty, the charge, if it is a private job, and the volume is small, the price of 80 cents a square meter, if the design institute charges, its price is about 4 yuan a square meter.
If the volume is large, the charge can be reduced point such as 60 cents a square meter. If the difficulty of a large workload, the charges must be correspondingly higher, such as heating, clean, ventilation, power, very strict requirements within the 10,000 clean plant, the HVAC charges to almost 20 yuan a square meter or even higher.
2, plant decoration prices
In the plant decoration of different grades of plant decoration, its price is not the same, the general price per square meter of ordinary plant decoration is generally between 600 yuan and 800 yuan; mid-range plant decoration price is generally between 800 yuan and 1,200 yuan; plant decoration price is generally between 1,200 yuan and 1,600 yuan.
Note: the above about Taizhou plant decoration design price collected from the network, only for decoration reference, due to the economic level of each region are different, at the same time each person's needs are also different, so there is a big difference in the price of plant decoration.
Second, Taizhou plant decoration design standards
Taizhou plant decoration in its design to a wide range of knowledge, especially in the performance of the decoration materials, quality, price and so on. To ensure the quality of the decoration, reduce the cost of decoration. In the decoration are to have the corresponding design standards, the following small make-up will introduce you to the relevant content about Taizhou plant decoration design standards.
1, ground decoration
In the ground part of the decoration is even, because it does not need to carry loads, in the selection of materials can choose inexpensive materials, such as: anti-static floor. Ground floor grass-roots level can choose to mix soil treatment, which is relatively low in price.
2, the top surface decoration
Since the plant decoration, the top surface is relatively high, most of the steel frame structure, in the top of the design should be designed to design the fire, ventilation, and central air conditioning, etc. If the pursuit of beauty, you can choose the best material, such as: anti-static floor. If the pursuit of beauty, you can choose mineral wool acoustic panels and other materials to decorate the top.
3, space division
In the plant decoration, space division should be designed according to the actual situation, if the plant equipment is more, it is not suitable for the design of too many partitions, in the decoration and design of the time you can use colored signs to divide the area, to avoid too many of these colors, the decoration of the time, pay attention to the data and the space of the close combination.
4, clean room design
Clean room closed door should be opened towards the air cleanliness of the room, windowless clean room closed door should be set up on the observation window. Indoor light reflection coefficient of each surface material, ceiling and wall should be 0.6-0.8; ground should be 0.15-0.35. Clean room wall and ceiling surface, should be in line with the requirements of flat, smooth, not gray, to avoid glare, easy to remove dust.
Three, plant secondary renovation process
1, demolition
For the secondary renovation of the plant, the first thing is to demolish all the places that need to be renovated, pay attention to the safety of the renovation, to avoid affecting the progress of the secondary renovation and decoration, and to be thorough in the demolition. First dismantle and then renovate is a constant principle of the renovation project, no matter when, should abide by this constant principle, in order to renovate every renovation project.
2, design
In the second renovation of the plant before the development of a preliminary program, in the renovation can be based on the function of the selection of grades, materials, costs, etc.. In the design of the layout should be reasonable, appropriate distribution.
3, materials
Choosing materials can run more than a few, understand the market beforehand, find the right products and prices. At the time of purchase _ caution, do not buy no brand products, so as not to be water goods.
4, the old plant renovation price exploration and bargaining, determine the price, signing
The price of the materials to compare, to determine a suitable for their own one, the recommendation is to consult a professional, the signing of the contract should include the material, the brand and the price, the more specific the better, to avoid future disputes.
5, time to prepare
Since the area in the secondary decoration of the plant is relatively large, in the renovation of the overhead is a large sum of money, before the renovation should be fully prepared, including time, design, materials, costs, etc., must be in place, the more prepared in the renovation of the time, so that the renovation of the speed of the speed of the more quickly.
(
)