(1) management institutions and personnel electrician is a special type of work, but also a dangerous type of work insecurity factors are more. At the same time, with the development of production, the degree of electrification continues to improve, the rapid increase in electricity consumption, the increasing number of professional electricians, and scattered throughout the plant departments. Therefore, electrical safety management is very important. In order to do a good job of electrical safety management, the requirements of the technical department should have a person responsible for electrical safety work, power department or power department should also be responsible for electricity safety work.
(2) rules and regulations The rules and regulations are summarized from the long-term production practice, is to ensure safety and promote the effective means of production. Safety regulations, electrical installation regulations; operation and management and maintenance systems and other regulations have a direct relationship with safety.
(3) Electrical Safety Inspection Electrical equipment running with defects for a long time, electrical staff operating against the rules is an important cause of electrical accidents. In order to find and eliminate hidden dangers in a timely manner, all electrical staff should be educated to strictly implement safety regulations, and must establish and strictly implement a set of scientific and perfect electrical safety inspection system.
(4) Electrical safety education In order to ensure the safe, economic and reasonable operation of electrical equipment within each unit, it is necessary to strengthen the management, training and assessment of electricians and related operators, and to improve the staff's technical level of electrical work and electrical safety level.
(5) safety information Safety information is an important basis for good safety work. Some technical information is also very necessary for safety work, should pay attention to the collection and preservation. In order to work and check the convenience, should establish a high-voltage system diagram, low-voltage wiring diagram, the whole plant overhead lines and cable line layout and other graphic information. Separate information should be established for important equipment. Records of each overhaul and test should be kept as information for checking. Records of equipment accidents and personal accidents should also be kept as information. Attention should be paid to the collection of electrical safety information at home and abroad, and be categorized as information to save.