Inspection Employee Self-Evaluation
Whether in school or in society, we may use self-evaluation, which is an important form of evaluation that belongs to one of the important elements of a person's self-concept. So the question arises, how in the world should write a proper self-evaluation? The following is what I have organized for you to test employee self-evaluation, I hope to be able to help you.
Inspection staff self-evaluation 1
xx year is coming to an end, in the blink of an eye I have spent another year in the growth. Looking back on this past year, we have a lot of help, I also learned a lot of knowledge in everyone. A year since my heart feeling is to do a qualified quality inspector is not difficult, but to do a good quality inspector is not so simple. I think: a good quality inspector not only to be modest and upright, the cause of the work seriously and conscientiously. And in the ideological and political, work skills should be more specialized. I, as a young quality inspector need to learn a lot of things are still a lot.
As a quality inspector, I always have to not feel the great responsibility on my shoulders. Therefore, I am in the actual work, when strict self-criticism, to do small and careful. First of all, we must always have a quality policy as an indicator, clear product quality responsibility.
In the work, I seriously involved, and in the spare time to learn other products, more product drawings, can understand the product drawings, construction of the principle of performance and other necessary knowledge. And listen carefully to the experience, carefully recorded. In the future work, I will redouble my efforts to learn professional knowledge, master a variety of skills, to achieve a multi-functional, to make up for the workload when the lack of manpower defects, to ensure the normal operation of the department's work.
"People are not saints, who can not fault" I also had some mistakes in the work, but I dare to respond. Through the leadership, colleagues, criticism, help and self-efforts to correct, never allow myself to fall twice in the same place. It is because I am not proud in the face of victory and do not bow down in the face of failure, I will grow and improve rapidly in the struggle. In addition, the train runs fast also depends on the leader of the train, whether from the work potential, or from the idea that there are many shortcomings. In these aspects I have been the departmental leadership and the staff of the department of the correct guidance and help, so that I work in the potential to improve, the direction is clear, the attitude is correct. Thus, I laid a good foundation for my development.
Through this year's work, I am lucky to have learned a lot of things. But this is not enough, especially in terms of diversified skills are still young. At the same time, with the increase of the company's business, the development of new products, it can be expected that our work will be more heavy, the requirements are also higher, need to master the knowledge of higher and wider. To this end, I will be a new state of mind into the work, will work more diligently, study hard, and strive to improve all kinds of work skills, work efficiency. Do your job and make your due contribution.
Inspection staff self-evaluation 2
Time like a shuttle, turn to the end of the year, in the old year and the new year, the review of the five-month work history, evaluation of the experience, lessons learned, in favor of the future work to avoid the shortcomings of the strengths, and do a better job in their jobs.
From July 15, 20xx I served as a technical quality inspector in the xx project department, in this big family, I learned from the leadership of the dedication and care, I learned from my colleagues diligence and self-discipline.
In July I just went to the project department, due to the first contact xx, do not know anything, so the leadership to give me drawings so that I have a preliminary understanding of xx_; to give me design specifications so that I understand a series of quality control requirements xx_; to give me the construction program so that I understand the order of the construction and the way to method and the subsequent period of time to take me to the site to give me an introduction to the construction of the tools used. Although the project had not officially started, the construction tools were not quite complete, but it gave me a deeper understanding of the work I would do in the future. After a period of time on the site after all aspects of contact, I feel that I have entered the state, the leadership will allow us to use the level meter for xx _ various procedures of the release line. At the beginning of the slower, while putting the line at the same time also have to look at the drawings, but with the change of time our speed in the acceleration of the understanding of the drawings is also deepening the drawings on some of the data in the mind constitutes a conditional reflex, this time in the heart there is a sense of accomplishment. This is a feeling that was not in school before, very beautiful.
In August, the project gradually began, first xx, after the beginning of the surprise and not adapt to the work put into the self, xx, etc., and gradually familiar with the work. After a week or so packing team into the field, xx _ began, the leadership arranged for me to carry out the technical quality inspection work about xx. During this period I gradually found that the management of workers is a very deep learning, if you can not make full use of all the favorable factors and the relevant quality acceptance system, prestige can not be established, the quality can not be guaranteed. I do not do well in this area, which will be a focus in the future in the work. During this period due to the group company documents project department of xx_ became my master, in the work there is to give me preaching, teaching and solving people.
In September, the prerequisites for xx have basically been met, and from the 13th onwards xx. I was arranged by the leadership to xx group to assist xx_shift supervisor a piece of work to grasp the quality of work. During this period there are several times almost can not stand xx_, but when I see a group of 20 or so handsome boy can stick to the post uninterruptedly to the speed of two units a day; xx long every day an hour early to, an hour late back, what all get it right. I am ashamed to say that I understand that there is a lot more to learn.
10, 11, 12 these months are following the xx go, every day xx and so on. At first, I realized that I had to do this, so I did it, and then I realized why I had to do it after the master, so I felt that what I was doing was at least a little bit meaningful. At the same time I am also responsible for the project data work, began to wear several jobs to the work of the career took the first step.
In these five months I learned a lot of experience and knowledge, in the exchange with others, communication methods also have a lot of growth, but also found some of my shortcomings. After the guidance of the master and other seniors to improve my overall level.
In short, in the future work, I will continue to evaluation and introspection, constantly spurring self and add energy to improve their own quality and business level, for the development of the company's contribution to the power of self.
Inspection of employee self-evaluation 3As a new employee, the work evaluation is still too far away, because I still know little about the work of many issues. But by XXX's guidance, combined with the production process of the initial processing, or a practical understanding of the different product processes. Personality is XXX, because the workshop long time processing, but also largely understand the production line prone to problems.
But for the quality of the product has the influence of external factors is still very unclear.
Learning and working this time, I learned that the primary processing is mainly aimed at controlling impurities and mastering the specifications of semi-finished products, the latter process has clear provisions. In addition to the fermentation room temperature, humidity and time can be changed according to the actual situation, the other basically step by step in accordance with the process to complete. Individuality is the weight and size requirements, but for the former, the processing of impurities can be mixed into the product of the instruments and equipment required; due to improper cleanup and mixing is not unlikely to be located; and even in the staff on the body of the wear may also be mixed into the possibility, and so on. It feels like a variety of things, but in fact to look for observation is not to find a clue, only the control of hair, that is obvious, in addition, I only understand the handling of the product on the ground.
For the whole process there are some problems, I understand its existence, but do not understand. Such as: workshop for a variety of products in the package process must be divided into batches, and the benefits of this work is what is found after the discovery of unusual problems, to be potentially affected by the quality of the product is stored separately, but what is considered to be the possibility of contact with how to be stored separately stored in what place the process of what kind of problems should be stopped production, and what degree of change can continue to be in the process of stopping the process of production, the previous processing of the product how to handle! And so on. There are many more small, do not understand how to implement.
There is also a part of me that feels like it exists, and that I need to learn, but I don't know what it means just to hear some unheard of work terms in meetings.
Because of the short working time, for all aspects of the understanding is too superficial, too much doubt makes me feel in the work of the head without a tail, there is a tail without a body, the desire to learn a bit of a doorway in the year before, I will grasp the time, double the efforts to the fastest speed of digestion and absorption.
As a young new employee, I will be open-minded to learn from everyone, before the end of 20xx year, there is a stage. Improvement, in order to do a good job in 20xx, as soon as possible to strive to synchronize with everyone, do a qualified quality management personnel.
Inspection employee self-evaluation 4Time passes, the years shuttle, in the blink of an eye xx year in the tension and busy in the past, looking back at a year, I as the company's quality department as an inspector, there are a lot of improvement, but there are also some shortcomings.
In the quality of the Department of a year, under the guidance of the leadership's concern, in the support of colleagues to help, I not only diligently and practically to complete the work, and successfully completed the leadership of the temporary tasks assigned to themselves in all aspects of the enhancement. In order to do a better job in the future, evaluation of experience, lessons learned, I work on a year's evaluation of the following:
First, study hard, comprehensive learning new knowledge
Inspection work is a special position, which requires never-ending learning new knowledge and improve skills, in order to reach this requirement, so we must pay attention to learning (and the leadership of the temporary tasks assigned by the leadership). Must focus on learning (learning new knowledge, learning new processes, learning new drawings, etc.)
Second, work hard to complete the tasks above
After half a year, to deal with the non-professional learning machining quality work, the work up is more difficult, but I am attentive to the challenge of the difficulties, I completed the leadership to give
This is the first time I've seen this.
Third, daily life, work attitude is correct
Since a year, I can consciously abide by the company's rules and regulations, in the work, do not be late, do not leave early, take the initiative to ask for leave, respect for the leadership, solidarity with colleagues, treating people with sincerity, hard work. Efforts to do: First, self-discipline according to regulations. Leadership regulations are not allowed to do I absolutely do not do, leadership requirements to arrive I strive to arrive, do not violate the rules, discipline, do not break the rules, break the law, do a competent quality inspector. Second, self-discipline with the system. I am strictly in accordance with the company's development of the various systems. In terms of quality, resolutely do not use should not be resolutely used, do not engage in humanism. The work within the self can also be treated with care, and strive to complete, so that neither offside, but also to be in place. In the coordination of work with other colleagues in the department, to achieve mutual understanding, mutual help and mutual learning, sincere treatment, the establishment of friendship, but also gained a lot of useful insights. I am aware of the achievements of our quality department behind all the staff of the *** with efforts and hard work. In the future, I will still treat the uncommon things with a normal heart, the courage to forge ahead, as always, to do a good job of every thing.
Fourth, there are major problems
Review to check their own problems, although they can be dedicated to their jobs, the heart of the initiative to carry out the work, made some achievements, but there are still many need to continue to improve and improve the place, I have always been in the effort, and strive to do well. In the work due to less professional knowledge, lack of experience, treating some of the solutions to the problem is too simple, the work method is too simple; sometimes more one-sided view of the problem, to cover the surface of the point, in the handling of some issues appear to be not calm enough. In the completion of the tasks assigned by the leadership on the basis of their own strengths, continue to strengthen the learning of professional knowledge, and further improve the inspection skills.
Fifth, the next year's work planning
In the new year, I am determined to seriously improve the business, the level of work, to contribute to the self should contribute to the power. In the next step of the work, I have to be modest to other peers and colleagues to learn from the work experience, draw on good working methods; at the same time in the spare time to learn business theory, expand the scope of knowledge hunting, and constantly improve their own business quality and level, so that the overall quality of the self and then have a new improvement to adapt to the development of the company and the needs of society. To further strengthen the spirit of professionalism, enhance the sense of responsibility, and improve the standard of work done.
I think I should strive to do: First, according to the leadership requirements, strengthen learning, technical mastery of maturity; Second, broaden professional knowledge, participate in various types of inspector qualification training and exams, as soon as possible to make myself a qualified quality inspector; Third, seriously study the implementation of the "machining quality control system", work hard and work hard to understand the company's arrangements for routine and temporary tasks, and can be completed in a serious and timely manner; Fourth, the implementation of "machining quality control system", the work of the company's regular and temporary tasks, and can be seriously and timely. To complete; Fourth, the inspection instrument should be operated correctly to achieve timely use of timely cleanup, timely registration, and do a good job of routine maintenance; Fifth, love of work, continue to learn about the quality of knowledge.
In short, the state of mind determines the state, the state determines success or failure! To the company to have a sense of responsibility, to the community to have love, to the work to have perseverance, to colleagues to have enthusiasm, to the self to have confidence! Do the self!
Inspection employee self-evaluation 520xx year, I quality inspection department inspection line staff in the company and the quality control center under the leadership of the company, go all out, dedicated to do a good job in the inspection of the product testing work, to perform the basic duties of the inspector, to ensure the normal operation of the production of the whole plant and the quality of the product control to do a lot of work, and at the same time to ensure the normal operation of the quality system, reviewing the work of a year, we are mainly from the following To the work of the year, we mainly from the first few aspects of the work done.
Product Feed Inspection:
1, raw material quality control related to the life of the product, we have been strictly put in place a good entrance, from the source to control the quality of the product, all purchased raw materials, first of all, according to the provisions of the system of inspection, the inspector to confirm that the quality of the supplier's submission of documents, and from the appearance of the dimensions of the test, if necessary, mechanical properties. Testing, if necessary, to do the mechanical properties of the test.
2, improve the transparency of the inspection, product inspection according to the size of the inspection volume, as soon as possible, and timely issuance of test reports to facilitate the warehouse for warehousing procedures to increase the transparency of the inspection, strict quality testing standards, in order to meet the quality requirements under the premise of doing the company is responsible for at the same time, not to the detriment of the interests of the supplier.
Semi-finished product inspection:
1, semi-finished product inspection is wide and large in quantity, and the precision is required, in order to ensure the quality of the product, we have implemented a full inspection system of the product, strict control of the inspection process, and the implementation of the system of responsibility for the results, and strictly enforced. All employees of the product are from the inspector's hands over, cohesion of the inspector's many efforts, I do not know how many days and nights of overtime, sacrificed how many inspectors rest time.
2, strict process control procedures. The flow of products on the process, must be in accordance with the product flow control procedures for the relevant procedures before release, and the implementation of the previous process on the next process is responsible for the next process, the next process to review the previous process system, to achieve the layers of checking
Self-deficiencies:
1, the work of occasional sloppy work caused by the mistakes, bring unnecessary trouble to work. The first time, I will not be able to do it. In the future, I will carefully complete my work with a rigorous work attitude.
2, in dealing with others due to personality reasons, not enough initiative. In order to complete the work more perfectly in the future, I will take the initiative and leadership and more communication with colleagues. Expect to learn from them through the conversation in the textbooks can not learn the knowledge.
Evaluation:
Since out of school, stepped into this historical arena, first of all, let me feel that this society is very strange, whether it is in the work or interpersonal relationships, for me, this just out of the cottage, what are the difficulties, after the baptism of the past few months really let me grow up quite a lot.
Inspection staff self-evaluation 6As a new employee, the job evaluation is still too far away, because I still know very little about many issues on the job. But by xx_'s guidance, combined with the production process of the initial processing, or a practical understanding of the different product processes. Personality is xx, because the workshop long time processing, also largely understand the production line prone to problems.
However, the external factors that affect the quality of the product are still very unclear.
During my study and work, I learned that the primary processing is mainly aimed at controlling impurities and mastering the specifications of semi-finished products, which are clearly defined in the process. In addition to the fermentation room temperature, humidity and time can be changed according to the actual situation, the other basically step by step in accordance with the process to complete. Individuality is the weight and size requirements, but for the former, the processing of impurities can be mixed into the product of the instruments and equipment required; due to improper cleanup and mixing is not unlikely to be located; and even in the staff on the body of the wear may also be mixed into the possibility, and so on. It feels like a variety of things, but in fact to look for observation is not to find a clue, only the control of hair, that is obvious, in addition, I only understand the handling of the product on the ground.
For the whole process there are some problems, I understand its existence, but do not understand. Such as: workshop for a variety of products in the package process must be divided into batches, and the benefits of this work is what is found after the discovery of unusual problems, it is possible to be affected by the quality of the product is stored separately, but what is considered to be the possibility of contact with how to be stored separately stored in what place the process of what kind of problems should be stopped production, and what degree of change can continue to be in the process of stopping the process of production, the previous processing of the product how to handle! And so on. There are many more small, do not understand how to implement.
There is also a part of me that feels like it exists, and that I need to learn, but I don't know what it means just to hear some unheard of work terms in meetings.
Because of the short working time, for all aspects of the understanding is too superficial, too much doubt makes me feel in the work of the head without a tail, there is a tail without a body, the desire to learn a bit of a doorway in the year before, I will grasp the time, double the efforts to the fastest speed of digestion and absorption.
As a young new employee, I will be modest to learn from everyone, before the end of 201_, there is a stage to improve in order to do a good job in 201_, as soon as possible to strive to synchronize with everyone, do a qualified quality management personnel.
;