Ethylene oxide sterilizer work is the process of sterilizing diagnostic and therapeutic instruments that are afraid of heat and moisture. It is used to meet clinical needs and ensure the quality of sterilization of items.
Henan Sanqiang ethylene oxide sterilizer work steps:
1 author coat and hat neat, wash hands, wear gloves;
2 open the air compressor, purify the dryer, to be the air pressure up to 08MPa, turn on the power supply of the sterilizer, check whether the printer is normal (in the above two steps, you need to pay attention to check the integrity of the connection between the loading frame and the trolley);
3 open the door of the sterilizer cabinet, check the amount of water in the water bottle, gas canisters (water is too small should be added in time);
4 will be packaged items and biological testing kit in accordance with the requirements of the special basket frame, into the sterilizer, clockwise rotation of the handle to the vertical, close the door;
5 set the temperature of 55 ° C, aeration time of 12h, press the "Start! 'key to enter the sterilization program;
6 sterilization is complete, press the stop button to end the program, counterclockwise rotation of the handle, 30-60s after the cabinet door automatically open (sterilization program is not completed, can not open the cabinet door);
7 will be taken out of the sterilized items, classified and placed in the sterile storage area;
8 to remove the bio-detection kit, to do the bio-detection (to determine this pot of time), and to do the bio-detection of the sterilizer. test (to determine whether the pot sterilization is qualified);
9 record the monitoring results.
It is my pleasure to clear your doubts!