The two plastic pipes are connected together, generally need to use the plastic pipe connector, then the plastic pipe connector should be how to connect it?
A, plastic pipe joints should be how to connect
1, directly on the sleeve: some plastic pipe can be directly combined together, if the user purchased plastic pipe can be combined together, then you can put the two plastic pipe directly together, if you are worried about the connection of the plastic pipe can not be connected to the location of the firm, then you can use wire in the connection position of the plastic pipe periphery to be wrapped to strengthen.
2
2, hot flare socket: first of all, the socket of the plastic pipe cut into beveled, followed by the mouth of the plastic pipe is inserted in the outer wall and the inner wall of the plastic pipe coated with some binder, this time must be a good control of the temperature of the oil can not be burned, so as to avoid damage to the plastic pipe. Then the two plastic pipe socket together, when the plastic pipe is connected together, should also be connected to the location of a layer of tarpaulin winding, in order to protect the interface position.
3, special glue connection: in the interface position of the plastic pipe coated with some specialized adhesive glue, and then connected together. Coating time must be coated evenly, and can not be coated too much, you can just press the plastic pipe on it.
4, heat fusion connection: with a specialized heat fusion instrument in the interface position of the plastic pipe heat fusion, and then connect the two interface position together. This method for the operation of technical requirements are relatively high, it is recommended that you should ask professionals to help operate, so as to avoid accidents.
Two, plastic pipe joints leak how to deal with
1, sewer joints leak
First find the leakage point, followed by the damaged position of the plastic pipe cut off, and then the new plastic pipe and the original plastic pipe aligned to the original plastic pipe, so that the replacement of the plastic pipe is installed in the original position, like two crossed pipes, and then in the interface position of the inner and outer walls of the application of some glue to paste, so that the two plastic pipe tightly stuck in the original position, like two crossed pipes, and then in the interface position of the inner and outer walls of the paste, and then in the interface position of the plastic pipe, and then in the interface position of the plastic pipe. Let the two plastic pipes stick together tightly.
2, loose joints
First check whether the plastic pipe joints are damaged, whether it can continue to use. If it can be used, you can use tools to tighten the connection position. If there is a slight crack in the interface, you should use glue to repair or waterproofing agent, waterproof glue and other products to repair. If the plastic pipe joint has been damaged, the joint must be replaced with a new one.
The above is about how the plastic pipe joints should be connected and how to deal with plastic pipe joint leakage in detail, I hope it can help friends in need.