1, switch on and off: Toggle the toggle switch to ON position, the thermostat turns on; Toggle the switch to OFF position, the thermostat turns off.
2, working mode setting: Toggle the toggle switch to COOL position, the thermostat is set to cooling mode; Toggle the toggle switch to HEAF position, the thermostat is set to heating mode.
3, temperature setting: Mechanical thermostat, using the knob type to set the temperature, put the red dot against the panel labeled temperature data can be.
4, wind speed setting: Toggle the switch to the LOW position; the thermostat is set to low wind speed; Toggle the switch to the WED position, the thermostat is set to mid-range wind speed; Toggle the switch to the HIGH position, the thermostat is set to high-grade wind speed.
Thermostat classification
Thermostat has two kinds
One kind of manual, labeled anti-freezing 5 degrees Celsius → 10 degrees Celsius → 15 degrees Celsius → 20 degrees Celsius → 25 degrees Celsius → 30 degrees Celsius is just like air conditioning, you arbitrarily regulate a temperature, indoor thermostat in this temperature.
The second is a 7-day multi-temporal programming thermostat, in accordance with your weekly routine, the preparation of a good program, boot, shutdown, warming, constant temperature and other operations, for example, a morning at work, the wall-hung boiler on their own shutdown, 6 p.m. to the home at 5:40 p.m. wall-hung boiler began to run on their own, walk into the door, it has been 20 degrees Celsius of the room temperature. When you go to sleep, the room temperature automatically jumps to 16 degrees Celsius, and all these changes are pre-set by you.
The thermostat is installed in a crowded living room, and like the air-conditioning switch in the office, it is wired. A concealed conduit from the bottom of the fireplace to the living room should be left in the renovation, with two multi-stranded rubber wires inside.
Reference: Baidu Encyclopedia-Central Air Conditioning Switch, Baidu Encyclopedia-Central Air Conditioning Thermostat