1,The calibration date of the safety lock of the hanging basket is 1 year.
2,Safety locks for hanging baskets have clear requirements for safety lock components in other places such as Shanghai and Hangzhou. The safety lock must be tested by a third party inspection organization with relevant national testing qualifications.
3. The safety lock is the fall arrester of the basket. When the wire rope of the lifting mechanism suddenly breaks or when the basket is over-accelerated due to other faults, the safety lock acts immediately and the basket is immediately locked to the safety wire rope.
4, according to the construction difficulty and construction site can produce chimney with ring basket, ship hanging basket, furnace testing basket, bridge with extra-long basket, elevator installation basket, rail type sliding basket and other non-standard basket, according to the material can be divided into steel frame electric basket, aluminum alloy electric basket, according to the lifting of the different sources of power are divided into According to the different power source of lifting, it is divided into manual cradle and electric cradle.
Precautions
1, will operate the platform in place hanging in the wire rope at the lower end of the position → insert the work wire rope into the lifting mechanism (so that the wire rope is in the tension state) → safety wire rope into the safety lock → 600mm from the ground to lift the work wire rope and the safety wire rope weight (so that the work wire rope and the safety wire rope is in the tension state.).
2, the basket platform according to the use of the required length (can not exceed the length specified in the factory manual) assembled into one (including the inner and outer and end guardrail).
3, each connection bolt, fasteners should be tightened. There should be no de-welding and leakage welding defects in the welded joints.
4, again trigger the reset lever to the release position, and make the wire rope freely up and down in the mechanism. Threading the rope after 600mm from the ground hanging a heavy hammer. Each part of the contact must be firm and reliable solid, overload limiter and limiters must be effective.