2, incineration can produce ash for use; 3, can avoid the smoke produced by direct combustion.
4, energy recovery: the energy in the waste can be converted into steam, electricity or hot water.
5, a wide range of incineration: incinerators can burn all non-usable combustible garbage. Garbage incinerator is a commonly used in medical and household waste products and animal harmless treatment of harmless treatment equipment. Its principle is to use the combustion of coal, fuel oil, gas and other fuels, high temperature incineration and carbonization of the material to be processed, to achieve the purpose of disinfection treatment. Specific working principle: the garbage is sent to the drying bed of the incinerator through the automatic feeding device for drying, and then sent to the first stage grate, which volatilizes and cracks under high temperature, and the grate is thrown out through the pulse aerodynamic device. Step by step, the waste is thrown into the grate of the next stage. At this point, the polymer material breaks down while the other substances are burned until it burns, it enters the ash pit and is discharged by an automatic slag removal device. Combustion air is injected through air holes in the grate and mixed with the waste while the waste is suspended in the air. The volatile and ruptured material enters the second stage combustion chamber for further cracking and combustion, and the unburned flue gas enters the third stage combustion chamber for complete combustion; the high-temperature flue gas passes through the heating surface of the boiler to heat up the steam, and the flue gas passes through the cooling and is discharged. In order to solve the problem of smoke and carbon black pollution, the combustion temperature was firstly raised to 700℃ and then to 800~1100℃. At that time, the effect of air volume and temperature input patterns were realized. Smoke took measures such as chimneys, blowers, and fans to increase the ventilation to meet the demand of combustion air. There are many factors that affect the steel structure, not only by changing the chemical composition of the steel, but also by changing the heat treatment of the incinerator