Computer room fire emergency plan (5 practical articles) (1) General rules
The purpose of compiling 1. 1
In order to efficiently and orderly do a good job in the emergency treatment of fire accidents in computer rooms, avoid or minimize the losses caused by fire accidents, ensure the safety of employees' lives and corporate property, and maintain social stability.
1.2 compilation basis
The Law of People's Republic of China (PRC) on Work Safety and the Regulations of Jiangsu Province on Fire Protection.
1.3 Scope of application
It is suitable for on-site emergency treatment and emergency rescue of fire accidents in computer rooms.
2. Event characteristics
2. 1 Event type and hazard analysis
2. 1. 1 The electrical circuit is short-circuited, overloaded, the contact resistance is too high, static electricity, lightning and other strong electricity intrudes, and the computer, air conditioner and other electrical equipment in the computer room are overheated for a long time, and equipment failure may cause a fire accident in the computer room.
2. 1.2 The fire accident in the computer room will cause computer equipment damage, system failure, network interruption or paralysis, which will affect the safe operation of the network.
2. 1.3 toxic smoke from the fire pollutes the air in the computer room, causing personal injury and death accidents such as poisoning and suffocation.
3. Emergency organization and responsibilities
3. 1 Fire emergency headquarters
Commander emergency headquarters:
Computer room fire emergency rescue headquarters:
Members:
3.2 Responsibilities of Headquarters Personnel
3.2. 1 Command responsibilities: overall command of emergency rescue work.
3.2.2 Professional responsibilities of high and low voltage: Organize and coordinate the personnel of this department to participate in emergency rescue work, and cut off the power supply of the dangerous computer room.
3.2.3 Professional responsibilities of intelligence: monitoring accidents in relevant areas.
3.2.4 Air-conditioning professional responsibilities: cut off the air-conditioning ventilation system in time, adjust the operation mode, and isolate the faulty equipment in case of any abnormal situation. 4 emergency treatment
4. 1 On-site emergency handling procedures
4. 1.65438+
At the same time, report to the company leaders and start this plan.
4. 1.2 The person in charge of the computer room makes corresponding emergency decisions according to the accident state and degree of harm, directs irrelevant personnel to evacuate, and all emergency rescue teams immediately carry out rescue.
4. 1.3 When the accident expands, call 1 19 to request the support of the municipal fire brigade. Alarm content: unit name, address, fire substance, fire scale and fire scope. Give your phone number and name to the other party for contact. At the same time, pay attention to listen to each other's questions in order to answer them correctly. After the phone call, you should wait for the arrival of the fire truck at the intersection immediately, so as to guide the fire truck to the fire scene quickly.
4.2 On-site emergency measures
4.2. 1 The person in charge of the computer room shall organize personnel to quickly find out the cause of the fire.
4.2.2 After the fire accident, the operators on duty should stick to their posts to ensure that the equipment operation will not endanger personal safety.
4.2.3 In the early stage of fire, the personnel on duty should use conventional fire extinguishers (dry powder or gas fire extinguishers) to extinguish the fire in this area. Control the initial fire and prevent the fire from spreading. According to the fire situation, immediately start the gas automatic fire extinguishing device.
4.2.4 When escaping from the trapped fire, cover your nose and mouth with a wet towel and leave quickly with your back to the direction of fireworks. When the escape route is cut off and no one rescues in a short time, the doors and windows facing the fire should be closed, the door crack should be blocked with wet towels and wet cloth, and the door should be watered thoroughly with water to prevent fireworks from invading.
4.2.5 In case of fire, effective measures should be taken to put out the flame, so that the wounded can leave the injured site quickly. When clothes catch fire, various methods should be adopted to put out the fire as soon as possible, such as soaking in water, spraying water, lying down and rolling on the spot, etc. Do not run upright or stand and shout, so as not to promote combustion and cause or aggravate respiratory tract burns. After the fire is put out, the wounded should take off their clothes immediately. If the clothes stick to the skin, you can cut off the non-stick part with the help of ambulance personnel and bandage the wound.
4.2.6 In a fire, it is generally unnecessary to carry out special treatment on the burn wound, try not to break the blisters, and do not apply colored external medicine such as gentian violet, so as not to affect the judgment of burn depth. In order to prevent the wound from further pollution, to avoid aggravating infection and deepening the wound, the wound should be immediately bandaged with a triangle towel, a big gauze piece, clean clothes, eyes and sheets. And give a simple and reliable dressing. When hands and feet are burned, each finger and toe should be bandaged separately to prevent adhesion.
4.2.7 After the fire brigade arrives at the scene of the fire, it shall immediately get in touch with the person in charge of the fire brigade to explain the status of fire fighting equipment and operation equipment, and then assist the fire brigade to put out the fire and provide technical support.
4.2.8 The production order can only be restored after the emergency treatment of accidents is completed.
4.3 fire accident reporting process
4.3. 1 After the fire, the personnel on duty shall immediately report to the person in charge of the computer room in addition to taking effective measures to put out the initial fire;
4.3.2 When the fire can't be controlled, the person in charge of the computer room decides to report the fire and request the fire brigade in the jurisdiction for rescue. And report the emergency information to the cloud within 1 hour after the fire accident. The quick report mainly includes the time and place of the accident, casualties, equipment damage, possible trigger factors and development trend.
contact information
Fire brigade: 1 19 medical emergency: 120.
4.4 Preventive measures
4.4. 1 Pay attention to prevent poisoning, suffocation, electric shock and burns during first aid.
4.4.2 Set up a warning line in the dangerous area and hang a signboard. Personnel without operating authority shall not tamper with the field equipment.
4.4.3 When wearing personal protective equipment, pay attention to check whether the protective equipment is qualified and within the effective inspection period; Wear and use positive pressure breathing apparatus, heat-insulating clothing, heat-insulating gloves, heat-insulating boots and other safety protection appliances correctly.
4.4.4 During self-rescue and mutual rescue at the scene, personnel who are not familiar with the scene situation and fire fighting methods shall not blindly enter the dangerous area. Before saving people, confirm whether your ability and site conditions can meet the needs of saving people.
4.4.5 After the emergency rescue, a comprehensive inspection shall be conducted to confirm that there are no hidden dangers of fire and building collapse at the site.
4.4.6 Strengthen self-protection to avoid personal injury caused by fire fighting.
4.5 Supplementary clauses
4.5. 1 Contact information of emergency personnel in the computer room.
Emergency plan for engine room fire (5 practical items) (2) This plan is specially formulated in order to conscientiously implement the State Council's regulations on the investigation of administrative responsibility for extraordinarily serious safety accidents, actively improve the emergency handling ability of major safety accidents in key and critical parts of our company, strive to reduce losses caused by various extraordinarily serious safety accidents, eliminate hidden dangers of fire accidents, and ensure the safety of company property and employees.
This plan is formulated for the fire in the communication room of our company.
The fire extinguishing process of the mobile communication room is as follows:
(a) the personnel on duty found a fire in the computer room (including the monitoring center personnel) should immediately go to the scene to check.
(2) When individual circuit boards catch fire, pull out the burning circuit boards and put out the fire with 12 1 1 or carbon dioxide fire extinguisher.
(3) When several circuit boards and cables of a cabinet catch fire, immediately pull out the burning circuit board and spray the extinguishing agent with 12 1 1 or carbon dioxide fire extinguisher.
(4) When the cabinet of the computer room is on fire and the personnel on duty are unable to put out the fire and save themselves, the monitoring center should cut off the power supply of the cabinet or floor, turn off the air conditioner, prohibit opening the window, and report to the leading group of the company's safety production management in time.
(5) The leading group of the company's safety production management directs the members of the obligatory fire brigade to put out the fire, organizes the personnel on duty to leave the scene immediately, closes the doors and windows, presses the regional automatic fire extinguishing button to put out the fire, calls 1 19 for help, and reports to the company's competent leader or the safety duty room and monitoring room at the same time, and broadcasts a fire alarm.
(six) after the arrival of the fire brigade, it should actively cooperate and briefly explain the fire location, fire situation and remedial measures that have been taken.
(7) If you can use 12 1 1 to spray fire extinguishing agent or carbon dioxide fire extinguisher, you should cooperate with the fire brigade to protect the site, eliminate hidden dangers and prevent the fire from happening again.
(8) If it is impossible to put out the fire with 12 1 1 or carbon dioxide fire extinguisher, in order to prevent smoking poisoning, people should be evacuated in an orderly manner, and corresponding fire extinguishing equipment should be used as soon as possible.
(nine) should protect the scene, according to the accident investigation and handling measures.
(10) Fire alarm telephone number: 1 19.
Special matters that should be paid attention to in this plan
1. In case of fire, while dealing with and ensuring personal safety, take corresponding rescue measures according to the importance of the equipment, ensure the important equipment, especially the direct telephone, upload corresponding data with northern Hebei and northern China, and ensure the smooth passage.
2. After the rescue of major equipment, after the repair of minor equipment and accident treatment, the corresponding experiments are carried out to ensure the operability of the equipment, and the feasibility of the equipment is analyzed.
Emergency plan for computer room fire (practical 5 articles) (article 3) Article 1 Computer room emergencies include network equipment or server failure and physical damage (water, fire, electricity, etc.) caused by natural disasters. ), safety accidents caused by human error, etc. Preventive measures for emergencies include: establishing a safe, reliable and stable operating room environment, fire prevention, theft prevention, lightning protection, waterproof, antistatic and dustproof; Establish a standby power supply system; Strengthen the awareness of fire prevention and theft prevention.
Article 2 The emergency plan for water leakage in the computer room is as follows:
First, when the computer room leaks, the first witness shall immediately notify the computer room management personnel.
2. If there is water leakage in the air conditioning system, the computer room administrator should immediately arrange to stop using the faulty air conditioner, remove the accumulated water in the computer room, and contact the equipment supplier in time for treatment. If necessary, you can temporarily cool the server with an electric fan.
Three, if the wall or window leaks, the computer room management personnel should immediately take effective measures to ensure the safety of the computer room, and at the same time arrange to inform the engineering personnel to clean up the accumulated water in time, repair the wall or window, and eliminate the hidden danger of water leakage.
Article 3 The emergency plan for computer room fire is as follows:
First, improve the environment of the computer room and ensure that fire extinguishers are placed in the computer room; It is forbidden to bring inflammable and explosive articles into the computer room.
Second, the computer room management personnel should be familiar with the internal fire safety operation and rules of the computer room, understand the working principle of fire fighting equipment, master the steps, measures and essentials of fire emergency treatment, and know how to put out the fire, which will put out the initial fire source.
Third, in the event of a fire, quickly cut off the power supply of the computer room to avoid the spread of the disaster, and contact the security department immediately to report the fire when necessary.
Article 4 The emergency plan for power failure in the computer room is as follows:
1. After receiving the power outage notice, relevant information should be released through the office system and telephone in time, and specific measures should be deployed to stop business and save data before the power outage.
Second, the computer room administrator should check the status of UPS power supply every day to ensure that the UPS power supply can automatically power the server to work normally for more than 15 minutes in case of sudden power failure, and ensure that the data of employees' work is saved in time.
Article 5 The emergency plan for communication network failure is as follows:
A, communication line interruption, abnormal traffic and other failures, found that the situation of employees or department leaders should promptly notify the network administrator. Second, after the network administrator knows the situation, he will quickly organize to detect the fault area and make relevant fault treatment, gradually restore the network connection between the fault area and the server, and restore the communication network to ensure normal operation.
Article 6 The emergency plan for server failure is as follows:
A, computer room management personnel check the status of each server in the computer room every day.
Second, back up the data of the data server regularly. And copy the backup data to the mobile device. When the server has serious hardware failure, the standby server is enabled to ensure normal operation.
Emergency plan for computer room fire (5 practical articles) (4) Article 1 Open fire and smoking are prohibited in the computer room. All equipment in the computer room should be maintained regularly and patrol records should be made, and cleaning should be carried out according to the actual situation of the computer room.
Article 2 The network administrator is responsible for the maintenance of the network equipment in the computer room. If machine faults are found, they should be eliminated in time. If there is a fault within the scope of hardware three guarantees, you should contact the supplier in time or send the machine to the supplier for maintenance.
Article 3 Hotel employees must strictly abide by the relevant regulations on the operation and management of the computer room, equipment and systems, and may not engage in work unrelated to system management, operation and maintenance, system installation and debugging in the computer room;
Article 4 do a good job in fire prevention, rain prevention, moisture prevention and theft prevention, and pay attention to the safety of electricity use; Check the temperature, humidity and power system of the computer room environment every week to see if it meets the requirements of relevant computer room standards.
Article 5 Switches and servers in the computer room are key equipment for hotel operation, and no one may configure or change their system parameters by himself.
Sixth, we should do a good job in the security of the computer room, and keep all kinds of accounts and passwords of the server strictly confidential.
Article 7 Data backup shall be made in time to ensure that data can be recovered quickly and safely when the system fails. All backup data shall not be changed, and local and off-site backup and storage are required.
Article 8 In order to ensure the normal operation of the hotel network, the equipment in the computer room should be inspected every day, mainly focusing on whether the servers and network equipment are in normal operation.
1. Adjust the temperature of the computer room. If the indoor temperature is too high, adjust the air conditioner to effectively ventilate the computer room.
2. Check the working status of switches, firewalls and access devices, and timely and effectively maintain any abnormality.
3. Monitor network operation.
Article 9 Except the hotel network administrator, other personnel of the company need to be accompanied by the network administrator when they enter the computer room for work.
Article 10 It is strictly forbidden for personnel from out-of-band units or irrelevant personnel to enter the computer room. If it is really necessary for work, such as system fault diagnosis and treatment, equipment maintenance, system or equipment installation, etc., they must be accompanied by network administrators to cooperate with the implementation of the project.
Eleventh equipment entering the computer room should be removed before entering the computer room to ensure the cleanliness and safety of the computer room environment.
Article 12 It is forbidden to bring inflammable, explosive and corrosive dangerous goods into the computer room.
Article 13 UPS power supply provided by the computer room is only allowed to supply power to core equipment such as host computer, server, network and storage. It is forbidden to insert other equipment to increase the power supply load of UPS power supply.
Article 14 It is forbidden to cut off the power supply of the system without authorization. If it is really necessary to cut off the power supply due to work, the corresponding preparations should be made first, approved by the department leaders, and then the power failure or power failure should be notified to all departments before implementation.
Article 15 When installing electrical equipment or items that need electricity in the computer room, professionals or installation engineers of equipment suppliers must conduct on-site investigation and confirm that they meet or meet the requirements before implementing the project.
Emergency plan for computer room fire (5 practical articles) (5 practical articles) Article 1 Computer room emergencies include network equipment or server failure and physical damage (water, fire, electricity, etc.) caused by natural disasters. ), safety accidents caused by human error, etc. Preventive measures for emergencies include: establishing a safe, reliable and stable operating room environment, fire prevention, theft prevention, lightning protection, waterproof, antistatic and dustproof; Establish a standby power supply system; Strengthen the awareness of fire prevention and theft prevention.
Article 2 The emergency plan for water leakage in the computer room is as follows:
1. When the computer room leaks, the first witness shall immediately notify the computer room administrator.
2. If the air conditioning system leaks, the computer room manager should immediately arrange to stop using the faulty air conditioner, remove the accumulated water in the computer room, and contact the equipment supplier in time for treatment. If necessary, you can temporarily cool the server with an electric fan.
3. If the wall or window leaks, the computer room administrator should immediately take effective measures to ensure the safety of the computer room, and at the same time arrange to inform the engineering personnel to clean up the accumulated water in time, repair the wall or window and eliminate the hidden danger of water leakage.
Article 3 The emergency plan for computer room fire is as follows:
1. Improve the environment of the computer room and ensure that fire extinguishers are placed in the computer room; It is forbidden to bring inflammable and explosive articles into the computer room.
2, computer room management personnel should be familiar with the internal fire safety operation and regulations, understand the working principle of fire fighting equipment, master the steps, measures and essentials of fire emergency treatment, know how to put out the fire, will put out the initial fire.
3. In case of fire, quickly cut off the power supply of the computer room to avoid the spread of disaster, and quickly contact the security department to report the fire immediately if necessary.
Article 4 The emergency plan for power failure in the computer room is as follows:
1. After receiving the power outage notice, relevant information should be released through the office system and telephone in time, and specific measures should be deployed to stop business and save data before the power outage.
2. Computer room managers should check the status of UPS power supply every day to ensure that UPS power supply can automatically supply the server to work normally for more than 15 minutes in case of sudden power failure, and ensure that employees' work data can be saved in time.
Article 5 The emergency plan for communication network failure is as follows:
1. In case of communication line interruption, abnormal traffic, etc., employees or department leaders who find the situation shall notify the network administrator in time. 2. After knowing the situation, the network administrator will quickly organize to detect the fault area, and make relevant fault treatment, gradually restore the network connection between the fault area and the server, and restore the communication network to ensure normal operation.
Article 6 The emergency plan for server failure is as follows:
1, the computer room manager checks the status of each server in the computer room every day.
2. Back up the data of the data server regularly. And copy the backup data to the mobile device. When the server has serious hardware failure, the standby server is enabled to ensure normal operation.