Have you ever written a commitment letter when you were in school. Just what exactly is a letter of commitment? A letter of commitment entails an assurance that the certification business will be conducted legally, fairly, and equitably in accordance with the approved scope of business. If you're going to write a letter of commitment, now we're going to take the time to do so in this area. What does it take to write a good quality letter of commitment? The following is an example of a 2023 Employee Safety Commitment Letter.
2023 Employee Safety Commitment Sample (Part 1)1, to fulfill the post safety responsibility for the enterprise safety is responsible for departmental safety is responsible for employee safety is responsible for their own safety.
2, consciously abide by the state, industry and the company's various safety management laws, rules, regulations, systems, regulations, and obey the management, correctly wear and use of labor protective equipment, and "violation, paralysis, irresponsibility" three major enemies to fight, and strive to achieve "not to hurt themselves, not to hurt others, not to be hurt by others". The company's main goal is to make sure that the company's products are safe and secure.
3, to comply with the traffic safety management of the laws, rules, regulations, systems, regulations, do not drive fatigue, do not drink and drive, do not lend the vehicle to the driver without a driver's license to drive, driving, do not play the cell phone, read the information.
4, comply with the fire management laws, rules, regulations, systems, provisions, and actively study the knowledge of fire extinguishing and fire escape, familiar with the use of various fire extinguishing equipment and escape routes.
5, daily work, not against the rules of command, not against the rules of operation, not violate labor discipline, not blind operation.
6, consciously accept the company, the department, the team's security briefing and technical briefing, consciously implement the security briefing and technical briefing requirements of the various security measures, do not take chances.
7, support the company's quality and safety department and the work of the higher safety supervision departments, and actively accept the safety management personnel and other personnel on their own unsafe behavior criticism and suggestions and timely correction. Do not hold resistance, do not fight, retaliate against the safety management personnel and other personnel pointing out their own unsafe behavior.
8, take the initiative to stop the unsafe behavior of colleagues, the discovery of hidden accidents or other unsafe factors, immediately to the site safety management personnel or the person in charge of the unit report; the person receiving the report should be dealt with in a timely manner.
9, actively participate in the company organized a variety of safety training and safety learning, safety activities, accident emergency drills, mastery of production safety knowledge required for operations, improve production safety skills, enhance accident prevention and emergency response capabilities.
Actively participate in the construction of the company's safety culture, and strive to create a harmonious atmosphere of production safety, and cultivate good work habits and safety values.
Commitment:
Commitment Date:
2023 Employee Safety Commitment Sample (Part 2)I am an employee of Jiangsu Park River Chemical Co., Ltd. and have the right and obligation to obtain safety production security and fulfill the rights and obligations of safety production according to law. In order to safe, environmentally friendly production, I solemnly promise:
1, to comply with national safety, environmental laws and regulations and company rules and regulations, consciously accept the safety, environmental protection education, to obey the safety, environmental protection management.
2, strictly abide by the post safety operating procedures, refused to disobey the command, do not violate the rules of operation, do not violate labor discipline, do not use faulty equipment, do not go to work after drinking, to achieve the "three do not hurt" (I do not hurt themselves, I do not hurt others, I do not want to be hurt by others).
3, consciously implement the "6S" (organize, straighten, clean, clean, quality, safety) site management regulations, to maintain a clean working environment.
4, the correct wear and use of labor protective equipment, safety protection from me.
5, the strict implementation of fire management regulations, never smoke in the plant and illegal use of open flame.
6, master the knowledge of fire safety, care for fire equipment, keep the fire channel open.
7, the strict implementation of the special post management system, never risk illegal operation.
8, timely reporting and troubleshooting of hidden accidents, active participation in emergency rescue, active cooperation with the incident investigation and handling.
9, save energy, eliminate waste, improve the utilization of limited resources.
10, actively participate in the management of waste gas, and strive to improve the level of waste gas treatment, to eliminate man-made causes of the phenomenon of running.
11, never discharging waste water, and strictly abide by the company's sewage diversion management system.
12, to comply with the management of hazardous waste (solid waste), to achieve a fixed point, categorized storage, disposal in accordance with the law. Never pile up, dumping caused by secondary pollution.
13, comply with traffic regulations, advocate civilized style.
2023 Employee Safety Commitment Sample (Part 3)I am xx Materials Ltd. department employees, in order to protect their own and other people's health, life and property safety, to prevent and reduce the occurrence of production safety accidents, I solemnly undertake to strictly fulfill the following duties and obligations in the work:
1, strictly abide by national laws, regulations and the company's (department) of the various Safety rules and regulations and safety management provisions, and actively participate in the organization of the enterprise's various safety activities, firmly establish the safety first, prevention-oriented thinking, and effectively perform job safety and work duties, due diligence to guard against all types of safety accidents.
2, voluntarily accept the company (department), team and other levels of safety (learning) training and business skills (learning) training, and strive to improve their own safety, work, business and technical skills, enhance the awareness of safety precautions, to do the three do no harm (do not hurt themselves, do not hurt others and do not be hurt by others).
3, consciously abide by the laws and regulations of production safety and the company's safety management rules and regulations, strictly abide by the company's position (or type) of the "safety and technical regulations", seriously according to the "job operation law", "process regulations", "operating instructions" for the operation, so as not to violate the rules of the operation, do not violate the labor discipline, and do not take risks in the operation.
4, with a certificate on duty (safety work permit, special operators qualification certificate), to maintain the work site standardization, standardization.
5, I have been through the safety training and education to ensure the correct use and maintenance of the post of safety protection devices, as well as labor protective equipment.
6, I have been through the safety training and education, have been familiar with the safety operation procedures of the post, master the post safety skills, know the dangers of the post, preventive measures and emergency response methods, will be able to report to the police, the use of first aid tools and fire-fighting appliances, and deal with accidents seedling.
7, actively participate in the company's accident hidden danger inspection and rectification work, found in the work of hidden accidents or other dangerous (hazardous) factors, immediately report upward and ask for solutions.
8, found in production safety accidents, timely upward report, and actively participate in the company's accident emergency rescue work, in the rescue to obey the command of superiors.
Commitment: XXX
Time: XXXX year XX month XX
2023 employee safety commitment letter model (Article 4)I started in the Shanxi Provincial Geological Survey Geophysical Survey Research Center engaged in the production of field prospecting work for the safety of the production, I commit to the following:
I am physically healthy, no infectious diseases, able to work in the field of the Center, and I will be able to work in the field of the Center, and I will be able to work in the field of the Center. I am in good health, no infectious diseases, I am able to work in the center of field physical exploration production;
Second, obey the center leadership and the person in charge of the site of the command, management, to do to abide by the rules and regulations of the law, the order to prohibit;
Third, to obey the center of the various management systems, to be honest and trustworthy, fair and honest, do not show favoritism;
Fourth, the safety guarantee:
1, seriously study and perform the center of field work safety management system. Fieldwork safety management system to ensure personal and property safety;
2, unity during the work of comrades, mutual collaboration; never drink alcohol without authorization, without safety education or not receive a valid certificate does not go on duty;
3, fieldwork during the consciously perform their safety duties, do not violate the rules of the operation, and found that others violate the rules to be stopped in a timely manner; in the work of the work against the rules of the operation, do not listen to the advice of the people, property injuries depending on the circumstances of the case. Personnel, property injuries depending on the severity of the case, bear the corresponding 'compensation until the pursuit of legal responsibility;
4, pay attention to their own and around the safety hazards during the work period, found that the problem rectification in a timely manner, to the inability to rectify the incident in a timely manner to take appropriate measures and report to the production safety department;
5, pay attention to the fire during the work of the wild, electricity safety, into the forest area is prohibited to smoke and the use of Open fire, other areas are not allowed to throw cigarettes, to determine the cigarette stubs extinguished and covered with soil before leaving;
6, field work to do civilized construction, mountain operations do not compete to ensure personal safety;
7, the driver in the yard after obtaining the certificate of work, as soon as possible to familiarize with the work area profile, safe driving, do not drive a hero car, do not drive fatigue,
8, in the production and security When there is a contradiction, production must obey the safety.
Fifth, production quality assurance
1, obey the center of the instrument and equipment management, technical quality management and physical exploration data management system, listen to the project responsible for the production team leader's technical requirements, and conscientiously study the implementation of the post of instrument operating procedures and safety production technical procedures;
2, work to take care of the instrument, to keep the instrument and equipment clean, to ensure that the instrument is not caused by human factors Damage or loss caused by human factors;
3, strictly according to the center of quality management system specifications for field construction, seriously fill out all the quality system documents, not false;
4, to ensure that the field prospecting data intact, and conscientiously fulfill the principle of confidentiality, do not leak confidentiality;
Commitment:
20xx year month
2023 Employee Safety Commitment model (Article 5)Party A:
Address: No. 13, Torch North Road, Mianyang Hi-tech Zone, Sichuan Province
Party B: Gender: Male. Nationality: Han;
ID card number:
Address: Sichuan Province
Party A and B (the traffic accident description:)
Party A to Party B a one-time payment of compensation for the **** counted yuan (capitals:) (including the 6000 paid medical fees), the cost of the cost includes in accordance with the "Regulations on the Handling of Road Traffic Accidents" and other laws and regulations Party A shall pay all the costs in accordance with the law, including medical expenses, follow-up treatment, nutrition, nursing, food subsidies, disability, and relatives in the handling of the accident, accommodation expenses, transportation costs. Both parties have accounted for this data in accordance with the law. As confirmed by Party B, Party B has been clearly aware of the rights stipulated in the relevant laws or policies, in addition to the above costs, Party B shall not claim any compensation or reimbursement costs from Party A again.
Party B and its close relatives voluntarily give up all rights based on the traffic accident and the right to arbitration and litigation, and shall not make any form of compensation claims to Party A for the compensation of the traffic accident; and shall not complain about the incident to the relevant governmental departments or have any objections, or else Party B shall unconditionally return all the payments made by Party A and the insurance company of Party A.
Party B is not responsible for any damages or compensation costs incurred in the traffic accident, except for the costs mentioned above.
Commitment:
Year Month Day
2023 Employee Safety Commitment Sample (Part 6)"Life is only once, safety from me," road traffic is closely related to us, road traffic safety affects the well-being of thousands of families. As a traffic participant, in order to my own and the community's peace, happiness, I promise to do:
First, do study, comply with the "Chinese People's *** and the State Road Traffic Safety Law", "Fujian Provincial Road Traffic Safety Regulations" and "Fujian Provincial Punishment of Road Traffic Violations Ordinance" and its related laws and regulations, always bear in mind the safety of the traffic and to ensure that the travel safety.
Second, to do a safe walk, not in the motorway arbitrary crossing, cross the road on the sidewalk,
not over and across the guardrail, there is no crosswalk, pay attention to oncoming traffic, do "a stop two see three through", "red stop! ", "green light line", "yellow light flash quickly line", to ensure their own safety.
Third, do not ride unlicensed motorcycles, illegal motorcycles, tricycles and electric bicycles; do not ride overloaded, poor condition of the vehicle; do not ride drunk, fatigue driver's car, responsible for their own lives.
Fourth, to do when driving a non-motorized vehicle to take the non-motorized lane, there is no motorized lane on the right side of the road.
V. Do not be illegal to carry passengers and cargo, do not drive modified vehicles, not fatigue driving, not
Drinking and driving, do not run red lights, do not scramble, do not blind high speed, do not drive a fight car, not parked, do not violate the rules of the overtaking.
I voluntarily abide by the above code, I am responsible for my own behavior, do civilized law-abiding citizens. Willing to work with the whole society, *** build traffic safety, smooth, civilized and harmonious City Hall.
This commitment in duplicate, A and B each party to take one.
Name of the unit (Party A): Commitment (Party B):
20xx xx month xx 20xx xx month xx
2023 Employee Safety Commitment Sample (Part 7)In order to personal safety and health, family happiness and the stable development of the enterprise, I voluntarily sign and comply with the following commitments during the work period:
1, before starting work, to receive New workers have received three-level safety education, production safety discipline education, health, safety and environmental management system education, this type of work, "Safe Production Operating Procedures", all safety, security management laws and regulations and education.
2, before starting work, has received safety supervision and other departments organized by the practitioners, safety management personnel or special equipment operators qualification training, and has been licensed to work.
3, bearing in mind the "safety first, prevention-oriented" approach to production safety, consciously fulfill the safety responsibilities of the post, in the production and safety conflicts, adhere to the safety first, so that people-oriented, safety first.
4, without violating the basic rights of citizens as stipulated in the relevant national laws and regulations, voluntarily accept the safety inspection and supervision of the superior leadership and safety functionaries, and consciously accept the company's closed, semi-military management.
5, in the work, consciously abide by national and local laws and regulations, consciously abide by the company's production safety management system and regulations. Do not violate the safety operation procedures, consciously comply with the company's management regulations.
6, consciously and correctly use personal labor protection equipment and safety protection equipment.
6, enhance the awareness of self-protection: will not hurt others, will not be hurt by others, will not hurt themselves at work. Do not engage in activities not related to work during working hours.
7, comply with the laws, regulations, systems and provisions of fire management, actively study fire and fire escape knowledge, familiar with the use of a variety of firefighting equipment and escape routes, mastering the post of various accidents of emergency measures, timely treatment of abnormalities, without losing time.
8, daily work does not violate the rules of command, illegal operation, violation of labor discipline, blind operation.
9, take the initiative to stop the unsafe behavior of colleagues, found hidden accidents or other unsafe factors, and immediately report to the site safety production management personnel or the person in charge of the unit; the person who receives the report should be dealt with in a timely manner.
10, actively participate in all kinds of safety training, safety learning, safety activities and emergency drills organized by the company, to master the production safety knowledge required for the operation, to improve production safety skills, and to enhance the ability to prevent accidents and emergency response.
I consciously abide by the above commitment, if any violation is willing to take responsibility.
This commitment is effective from the date of signature.
Commitment (signature):
Type of work:
Project Manager (signature):
___Year ___Month ___Day
2023 Employee Safety Commitment Sample (Part 8)xx Shift:
As a post worker in the Quality Management Department, I am responsible for the safety and environmental protection of this post, and I have to do a good job of the job. 20xx environmental protection and production safety work to do the following solemn commitment:
First, firmly establish the concept of scientific development, safe development, green development, the implementation of production safety, "safety first, prevention first, comprehensive treatment" policy, adhere to the environmental protection, "protection first, Prevention first, comprehensive management" principle, adhere to the environmental protection "red line", build a safe "bottom line".
Second, under the leadership of leaders at all levels, strict compliance with safety, environmental regulations and safety procedures, obedience to management, do not violate the rules of operation, the right to refuse to violate the command, not risky operations.
Third, abide by labor discipline, correctly wear and use of labor protection equipment, and have the right to supervise others to do a good job of labor protection and safety work, according to the safe route to walk, sampling.
Fourth, do a good job of "four prevention" (fire, theft, vandalism, traffic accidents), to ensure personal safety and collective property safety.
V. Actively participate in production safety activities organized at all levels, familiar with the knowledge of emergency rescue, put forward rationalization proposals on production safety.
VI, strengthen the safety management of the positions and production sites belonging to the requirements of the use of equipment, facilities, tools must be carefully checked before operation, found defects and hidden danger, should be dealt with in a timely manner or reported to the solution.
VII, consciously accept the company's safety and environmental protection departments in charge of supervision and inspection, strict implementation of the regulatory instructions and rectification requirements. During the commitment period, if you violate the above commitments and fail to fulfill the terms of this commitment, voluntarily accept the upper limit of the company's relevant system of punishment.
Commitment: xx
xxxx year x month x day
2023 employee safety commitment letter model (Article 9)I promise:
First, consciously implement the state's production safety regulations and provisions, comply with the company's relevant production safety system, set up a safety first, prevention-oriented thinking, to ensure safe production, civilized production.
Second, to comply with the safety duties of the post, the strict implementation of the production safety responsibility system, strict compliance with labor discipline and safety regulations, the post is responsible for the safety of production.
Third, seriously study and strictly abide by the rules and regulations, labor discipline and operating procedures, obedience to management, do not violate the rules and regulations and to discourage, stop others from violating the rules and regulations. The right to refuse to carry out illegal command and timely report to the leadership.
Fourth, consciously accept the production safety education and training, master the work required by the production safety knowledge, improve production safety skills, enhance accident prevention and emergency response capabilities.
V. Understand the hazardous factors, preventive measures and emergency response to accidents in their workplaces and jobs, dress according to the regulations, and properly store and correctly use all kinds of labor protective equipment and firefighting equipment.
Six, found hidden accidents or other unsafe factors, should be reported to the site safety management personnel or the person in charge of the unit, when found directly endangering the safety of the person in case of emergency, immediately stop the operation or in the case of possible emergency measures to evacuate the workplace.
VII, the strict implementation of process discipline, do a good job of recording, shift handover must hand over the safety situation.
viii. Before working on a variety of production equipment to check the safety protection facilities, equipment inspection is normal before starting the equipment.
IX, the use of machinery, electrical equipment, must strictly comply with the operating procedures of the equipment and the provisions of the safety of electricity. Do not use safety devices are not complete equipment, do not remove the mechanical equipment safety protection or insurance devices.
X. Overhaul of mechanical and electrical equipment, must close the equipment power switch and various valves, and hang a warning sign. Non-parties are not allowed to move the warning signs without authorization. Overhaul of equipment must implement various safety measures, safety measures are not implemented not to carry out equipment maintenance.
XI, found that the accident was immediately reported, and actively participate in the rescue, protection of the accident scene.
XII, actively participate in safety activities, participate in emergency preparedness drill activities.
xiii On the way to and from work and walking in the factory, strictly abide by traffic rules.
Commitment: XXX
Time: XXXX year XX month XX
2023 employee safety commitment letter model (Article 10)First, in the work of the strict implementation of the following duties and obligations:
1, We must firmly establish the "production safety, everyone is responsible for", "safety first, prevention first, comprehensive management" idea, consciously abide by the company's safety and environmental management rules and regulations and operating procedures.
2. New employees must participate in the company, the workshop, the classroom three-level safety and environmental education and learning, and only after passing the examination can be on duty.
3. Seriously participate in the safety group study and daily briefing, actively participate in various safety and environmental protection activities, concerned about safety and environmental protection work, and actively put forward safety and environmental protection rationalization proposals.
4. Enhance the awareness of self-protection, correctly wear labor protective equipment, mutual care and supervision, to achieve the "four do no harm" (I do not harm themselves, I do not harm others, I will not be harmed by others, I protect others from harm).
5. Understand the working environment of the construction site, check the use of tools and mechanical equipment at any time, do not remove the safety guards on the machinery and equipment without authorization, do not touch the equipment and facilities not related to the work, do not enter the dangerous places not related to their own.
6. Master the process and operating skills, and do a good job of handover. Finish the work, clean up the materials and clean up the site.
7. Accidents should be reported promptly and actively participate in rescue. At the same time, should protect the accident scene, truthfully provide the investigator with the situation, shall not be concealed.
8. Have the right to refuse unauthorized command, and have the right to criticize or blame the wrong decision or behavior that violates the safety and environmental management regulations.
Second, strictly implement the following operating procedures:
1. Wear personal protective equipment before work.
2. Before work, carefully check whether the welding machine and welding tape is intact, whether the insulation of the welding clamp is good, whether the welding machine shell has a reliable grounding, the repair of the welding machine should be carried out by an electrician, and other personnel are not allowed to disassemble and repair.
3. Wear protective clothing and shoes before work, keep welding gloves dry.
4. Before starting the welder, the person pushing the welder gate must stand on the side to prevent being burned by the arc. When starting the welder, pay attention to whether the welder is running normally. If you find a fault or wire, welding belt leakage, you must remove the fault before use. Welding machine wiring and repair should be carried out by an electrician, other personnel shall not be wired and repaired.
5. When working in wet places, dry boards or other insulating materials should be placed under the feet.
6. The welder can not be rained on, exposed to the sun or placed in a corrosive place to prevent the intrusion of harmful media. All wires shall not be placed in grease, acid, alkali and other corrosive places.
7. Oxygen measurements and explosion measurements must be taken before welding operations in confined compartments, narrow spaces and containers. Effective ventilation and lighting should be maintained during operation. The two-person supervision system should be strictly enforced. The guardian must stick to his post and take timely measures when problems are found.
8. When welding objects, rust and oxides must be removed. After welding, the welding slag should be knocked off. Strictly check the welds and fillet welds must meet the technical requirements.
9. When the belt is stuck by other objects, don't drag or pull hard, and don't pull the end of the faucet line to prevent the object from falling and falling from the head.
10. When replacing the electrode head, it should be kept in a centralized manner and should not be thrown around, especially when working at high places.
I will voluntarily accept the penalties of the branch, workshop and team and bear the corresponding consequences if I seriously violate the relevant production safety regulations.
Employee Signature: