Liaojing Technology for your answer
Stainless steel water tank:
Stainless steel water tanks are commonly stainless steel fire fighting water tanks, square combined water tanks, vertical round water tanks, horizontal round water tanks. Using SUS304, SUS316L, SUS444 and other stainless steel plate, stamping molding. Generally stamped into three sizes, respectively, 1x1 meters, 1x0.5 meters and 0.5x0.5 meters three kinds of periphery with tungsten argon arc welding, with high strength, light weight, low cost, environmental health and other characteristics. Manufacturing standards for the national building standards 02s101 design atlas.
Parameters
1, to the water tank weld, material:
The following according to the stamping stainless steel water tank technical parameters compiled by the water tank accessory material using ordinary carbon steel plate and type of just made, LB304NI8.0 type welding electrode welded, and the quality of its should be in accordance with the respective The current standard "carbon structural steel" and "carbon steel welding rod" provisions.
Box top, box wall, box bottom of the LB304 stainless steel plate splicing are butt welding (top plate for the I-type weld, the bottom plate and the side wall for the V-type weld), the other welded for the angle weld, weld between the weld is not allowed to have a cross phenomenon, and shall not be overlap with the reinforcing ribs, the welding machine for the LB-2-300 stainless steel water tank special welding machine, with electric welding and argon welding function, the quality should be in accordance with the current standards of carbon structural steel and carbon steel welding rod. With electric welding and argon welding function.
2, full of water experiment
water tank production is completed, the water tank is completely full of water, after 2 ~ 3 hours, with a weight of 0.5 ~ 1.5 kg hammer lead along the weld on both sides of the place of about 150 mm tap, no leakage of water is qualified; if found to have leakage, shall be re Welding, and then the experiment.
Scope
Stainless steel water tanks are suitable for large hotels and restaurants, institutions, apartments, scientific research and teaching buildings, and food processing, medical and health care, the electronics industry and other places with high water quality requirements. (Note: the high content of chlorine ions in the water should be used with caution)
Carbon steel tank
Carbon steel tank manufacturing, installation are not subject to civil construction, without welding equipment, the surface of the hot zinc anticorrosion treatment, beautiful and durable, to prevent secondary pollution of the water quality, is beneficial to human health, and comply with the standardization of construction products, series, factory, and the production of stainless steel tank. Construction product standardization, serialization, factory requirements.
The water tank is made of Q235 steel plate, stamped to form 1000×1000 and 1000×500 standard blocks, peripheral drilling, hot-dip galvanized treatment, on-site installation, assembled with non-toxic rubber pads clamped between the standard blocks, bolted connection.
Water tanks are suitable for building water supply storage, regulating water tanks, heating system expansion, condensation tanks and temporary water storage tanks for building construction, geological survey, industry, national defense projects, etc.
Water tanks are suitable for building water supply, regulating water tanks, heating system expansion, condensation tanks and temporary water storage tanks.
The water storage volume is from 1.0 cubic meters to 1000 cubic meters, and the height is up to 5 meters.
The inlet and outlet pipes of the water tank and the overflow pipe diameter and position are determined by the design; the water tank should be surrounded by a channel of not less than 7000mm, the bottom of the box and the accessories are hot-dip galvanized.
Water test: after the assembly of the water tank, close the outlet pipe and drain pipe, open the inlet pipe, the side of the water check, put full until, after 2-3 hours of water seepage is qualified.