How does an ozone generator work?

The working principle of ozone generator:

Ozone generator is the use of high-voltage discharge principle, the conversion of oxygen into ozone process. That is, high-voltage alternating current is added to the high-voltage electrodes in the middle of a spaced insulator and have a certain gap, so that after the dry purified air or oxygen through. When the high-voltage alternating current reaches 10-15KV, a blue glow discharge [corona] is generated, and the free high-energy ions in the corona dissociate the O2 molecules and polymerize into O3 molecules by collision. Ozone production, concentration with the added power supply voltage, current and other changes.

The ozone generator is a device used to produce ozone gas (O3). Ozone is easy to decompose can not be stored, need to be produced on-site on-site use (special circumstances can be stored for a short period of time), so wherever you can use the ozone of the place are required to use ozone generators. Ozone generator in drinking water, sewage, industrial oxidation, food processing and preservation, pharmaceutical synthesis, space sterilization and other fields are widely used. The ozone gas produced by the ozone generator can be utilized directly or mixed with liquid through the mixing device to participate in the reaction.

Installation precautions:

1, install the equipment in a dry and spacious place to facilitate heat dissipation and maintenance;

2, to ensure that the electricity, gas, water in and out of the gas pipeline is connected correctly;

3, the capacity of the lines used is in line with the requirements to ensure that the elimination of fire hazards;

4, high-voltage hazard, do not use water to flush the equipment;

4, high-pressure danger, do not use water to flush the equipment;

5, the ozone generator can be used in a wide range of applications. /p>

5, can not be placed near the substation;

6, away from high-voltage lines;

7, the ground should not be wet;

8, the equipment from the surrounding area should have a certain space (≥ 300mm).

Use instructions

1, ozone generator installers must be technically trained to boot maintenance;

2, the use of ozone sterilization, it is strictly prohibited for staff to go to work in a higher concentration of ozone and work in the environment;

3, remember to deal with the maintenance of the equipment or repair of the power supply is disconnected and the ozone deflated under the state, to ensure the safety of personnel maintenance;

3, remember to deal with the power supply disconnected and ozone deflated state, can be very good! Ensure the safety of personnel maintenance;

4, such as abnormalities, please immediately disconnect the power or notify the professional overhaul;

5, qualified special grounding wire, safe and reliable grounding, prohibit the installation of ammonia leakage or explosion risk in the hazardous areas;

6, the application of ozone generator for the process the method of operation of the operator should be aware of, and be able to skillfully operate this disinfection equipment;

7, the ozone generator can be used in the ozone environment, the ozone generator can be used in the ozone environment. Operation of this disinfection equipment;

7, such as the occurrence of ozone leakage needs to be the first time to turn off the ozone generator, and open the ventilation equipment for ventilation treatment, instantly exit the ozone generator space, such as the space residual ozone down to the safe range and then enter.