How many types of humidifiers are there? Which one is suitable for the Northeast?

Humidifier is a kind of home appliance that can moisten the air, it can also be used to clean jewelry, purify the air, medical atomization and so on. Currently on the market humidifiers are electrically heated, pure type, ultrasonic type. Electrically heated humidifier in use without "white powder" phenomenon, low noise, but power consumption, humidifiers are easy to scale; pure humidifier without "white powder" phenomenon is not scaling, small power, with air circulation system, can filter the air and kill bacteria; ultrasonic humidifier humidification intensity and large and medical atomization. Humidifier humidification intensity and uniform, small power consumption, long service life, both medical atomization, cold bath, cleaning jewelry and other functions, but the water quality has certain requirements, the use of a slight "white powder" phenomenon.

Shopping and checking.

[A] choose a humidifier according to the actual situation of the home, choose the appropriate type and product specifications. If you live in a particularly windy and dry areas or larger rooms, the amount of humidification required to be larger, you should purchase a larger power humidifier; such as the poor quality of water in the region or the need to humidify the air quality of the space is not good, you should purchase ultrasonic humidifier with water softener or pure humidifier; such as the water in the region can be or the need to humidify the space of the air quality is not too high requirements, you can purchase electrically heated humidifiers.

[2] atomization effect is a key factor in the spray humidifier, test the atomization effect can be fog volume knob to the middle gear, observe whether the water mist is fine, transparent and upward, and the palm of the hand from the spray mouth 20cm, continuous spraying for 15 seconds, if you feel the palm of the hand moist and no water droplets, that the atomization effect of the fine uniformity and rapid increase in the humidification requirements.

[3] Select ultrasonic humidifier is best to choose products with automatic thermostat device, because this type of humidifier can be based on the user's needs, set the humidity in advance and automatically turn on and off the machine to maintain constant humidity, so that the humidified space is in a balanced state of moisturizing. [D] water sensing device sensitivity, to prevent the humidifier idle dry burning, to ensure that the service life of the humidifier has a very important role. Selection should be fully tested humidifier water shortage automatic protection function, to see how its sensitivity, automatic protection function is effective. Choose products with high sensitivity, large protection range and reliable automatic function.

Use, maintenance and taboos

[A] use of humidifiers is not the humidifier the larger the better, in fact, can not be too low and can not be too high, it should be maintained between 40 ~ 60% RH, humidifier humidification control between 300 ~ 350 ml per hour is appropriate.

[ii]Various humidifiers have different requirements for water quality, such as pure-type humidifier to use pure water, ultrasonic humidifier is best to use pure water or distilled water, electrically heated humidifier with ordinary water can be.

[three] humidifier tank of water at any time may run out of water and idling dry burn damage to the machine, so try to use the product with automatic water shortage protection, but also in the usual observation of the tank's water reserves, and give timely supplementation.

[four] water tank, transducer and other easy to scale parts to be cleaned once a week, cleaning can be used soft cloth, soft brush and water cleaning, shall not be used detergent, kerosene, alcohol, etc. to clean the body and parts, shall not be used to scrape the scale with a hard object, so as to avoid damage to the machine parts.

[E]The humidifier is best placed on a plane 0.5~1.5m high from the ground, away from heat sources and corrosive substances. It is strictly prohibited to touch the nozzle in use to prevent scalding, and should be shut down immediately for maintenance in case of failure.