Almost to the end of the year, the Ministry of Safety and Environmental Protection to reflect on the work of the past year, will find some results in the work, while there are still some problems. The following is organized by me for you to "safety and environmental protection department year-end work summary", for reference only, welcome to read.
First, the main work in 20xx is as follows
1, rationalize the security assessment, environmental assessment procedures, promote the security assessment, environmental exchange procedures for the process
I in the Department of Security and Environmental Protection is mainly responsible for the security assessment, environmental assessment procedures for the work, due to the security and environmental protection department was established not long ago, the development zone of the relevant work departments are also just established, a lot of work has not been involved in, and the work of the company has not been involved in the work of the company, and the company has not been involved in the work of the company. Under the leadership of the company's leaders, we walk diligently, ask more questions, through the government issued documents and the relevant departments of the procedures of the serious study, step by step to find out and summarize a set of procedures for handling the relevant procedures for the convenience of future work, improve the quality of work. At present, the safety assessment, environmental assessment work has made greater progress.
2, seriously study the documents issued by the higher level, to help establish and improve the company's safety, environmental protection system.
According to the requirements of the relevant departments, this year, the company began to accelerate the establishment of the plant management system, sound work, a lot of safety, environmental protection-related provisions are based on the leadership of the authorization, combined with the actual situation of the plant summarized the development. The development of these systems not only meets the inspection requirements of the higher authorities, but also facilitates the management of our company.
3, on time to complete the higher leadership arranged by the inspection, rectification related work
As the company's belong to the new enterprises, the functional departments of the company's inspection and management is more stringent. In the past year, I was in the company under the guidance of the leadership of the higher departments to complete the inspection of the enterprise system, project procedures and other aspects of the work. The higher departments issued rectification advice, I took the initiative to supervise the implementation of rectification, organization of personnel study and training, improve staff safety awareness, violation of safety regulations of people or things to correct, through the rectification of hidden dangers, effectively guarantee the smooth progress of the work of production safety.
4, responsible for safety, environmental protection and other functional departments issued by the receipt of documents, sorting, storage work
5, the formation of the company's computer office network, to complete the work of computer maintenance and computer charting
Due to personal hobbies, I learned the cad drawing software at the university, and after joining the work of work have been engaged in the work of computer-related, so slowly mastered a certain computer maintenance related knowledge. 20, I have a good knowledge of computer maintenance. In 20xx, due to the office needs, the company has purchased a number of computers, at that time, the company does not know much about computers, I use their own knowledge to complete the computer network set up and daily maintenance work, the work of security and environmental assessment and the design of the plant, the design of the workshop used in the work of cad drawing work is mostly by me to complete.
6, rationalize the work of the personnel department procedures, complete the initial construction of the company's personnel electronic archives
20xx, the company is not complete, I also manage the work of the personnel department, in order to facilitate the management of my efforts to learn the relevant knowledge from the Internet to collect information, and to find a set of free personnel management software, the establishment of the personnel electronic archives, so that personnel management procedures, order, and basically rationalize the personnel management, and the work of the company's personnel department, I have been working hard. The company's main goal is to provide the best possible service to its customers.
Second, there are shortcomings
A year's work has made certain achievements, but there are some shortcomings, mainly in the degree of liberation of the mind is not enough, the organization, the ability to communicate with a slight lack of experience and there is still a certain gap between the comparison of colleagues, the second involves a variety of complexity of the work, the need for time to learn, the third is the work of the Not bold enough, in the continuous learning process to change the working methods, continuous innovation and improvement. In the future work, I must seriously summarize the experience, overcome the shortcomings, and strive to do a better job.
Third, next year's work plan
1, seriously study, and strive to improve their own quality and working ability, due diligence, due diligence, and as soon as possible to complete the work of the Department of Safety and Environmental Protection.
2, carry forward the spirit of hard work. Not afraid of suffering, take the initiative to find things to do, to do "eyes, mouth, hands, legs," and actively adapt to a variety of environments, in the complexity of the work of honing the will to grow competent.
3, carry forward the spirit of tireless enterprise. Strengthen the study, the courage to practice, in the study at the same time pay attention to the collection of various types of information, a wide range of "nutrition"; at the same time, pay attention to learning methods, correct learning attitude, improve learning efficiency, and strive to cultivate their own solid theoretical foundation and pragmatic style of work. Strive to do a better job and establish a good image.
4, as a good assistant. Decision-making and the emergence of problems, timely rationalization proposals and solutions for the leadership reference, with the departmental leadership to complete the tasks assigned by the company.
In short, over the past year, I have done a certain amount of work, but also made some achievements, but from the requirements of a certain gap, I will continue to summarize the experience, strengthen learning, update the concept of improving the ability to work in all aspects. Closely around the center of the company's work, to the work, the cause of a highly responsible attitude, down-to-earth, conscientious and responsible to do a good job.
Safety and Environmental Protection Department year-end work summary (2)20xx year is xx safety and environmental protection department in the management of production safety from the institutionalization of standardization, normalization of the key year, but also the century Qingshan in the establishment of safety management work, "everyone has a responsibility, there are procedures, when there is a control, ring assessment, rewards and punishments have a system of bad corrective action. "Smooth process, the assessment of the closed loop of the safety operation system of the transition year.
Under the correct leadership of the company's leadership, the production departments workshop cadres, workers' strong support and active cooperation, mainly around the safety targets set at the beginning of the year, "safety standardization" and "environmental protection at the same time" acceptance to carry out the work; adhere to the "safety standardization" and "environmental protection at the same time" acceptance. "Safety standardization" as the main line, to improve the quality of the safety environment, to protect the health and safety of workers as a starting point, focusing on the work of a sound system, management measures to support the prevention of special equipment, the environment, comprehensive finishing, and achieved since the commissioning of the lowest rate of accidents in a year, for the first time to achieve the company's xx goals set at the beginning of the year. Now the Department of Safety and Environmental Protection in 20xx the main safety and environmental protection work summary and 20xx work ideas are summarized as follows:
First, at the beginning of the year to conscientiously implement the responsibility system for production safety, signing the safety objectives of the letter of responsibility at all levels
The Department of Safety and Environmental Protection to start from the strengthening of the safety responsibility and target management, and conscientiously implement the responsibility of the safety of the production appraisal index system, will be the accident The number of accidents, the number of injuries, personnel training, the regular meeting system, team building, safety activities, the range of rewards and penalties, etc. quantitative refinement, comprehensively included in the management of safety responsibility objectives, at the beginning of the year, respectively, with the company's own xx departments signed a safety responsibility system, and require layer by layer decomposition. Each production department **** decomposition to xx workshop, xx shift. Through the layer by layer decomposition of the annual safety work objectives, transfer work pressure, to do "a thousand kilograms of burden everyone pick, everyone has a target", so that we really take the target as a work goal, the pressure as a work motivation, the responsibility as a work mission, to ensure that the company's work throughout the year to carry out the work smoothly. 20xx young injury accidents x (including the Furnace Department) x cases, equipment department x cases, nickel-iron plant x cases), the medical cost of work injury is xxx dollars. According to the number of employees xx people on xx month xx calculated, the injury rate control in xxx ‰, to achieve the goal set at the beginning of the year of the accident rate x.
Second , deployed in advance, according to the plan to carry out work in an orderly manner, to ensure that safety and environmental protection accidents in a controlled state
adhere to the x day of the month to carry out safety and environmental protection meeting system, summarize the state of safety and environmental protection work in the previous month, such as accidents, hidden dangers and rectification of the situation, the compliance of safety and environmental protection regulations of the units, rewards and penalties, such as the briefing, etc., to lay out the next month and the next phase. Lay out the work for the next month and the next stage. By convening the person in charge of each department and workshop to hold regular safety and environmental protection meetings, we can find the shortcomings in the work in time, correct the deviation in the safety and environmental protection work, amend the work performance target, reduce the possibility of accidents, and ensure that the subsequent work is carried out in an orderly manner. Since the launch of the monthly meeting since the safety of industrial accidents from 20xx year xx, down to 20xx year x, the accident rate fell by xx%. 20xx year did not occur an environmental pollution accidents, not due to environmental pollution accidents and shut down or punished, no violation of the emissions caused by the environmental public health.
Third, the establishment of a sound safety and environmental protection management system ledger, and constantly improve the effectiveness of the system
In order to ensure that the safety and environmental protection of the work standardized and orderly, so that the century Castle Peak's safety and environmental protection system to comply with the effectiveness of the use of the system can meet the requirements. x month to formulate the "xxx Limited Environmental Protection Management Regulations" and "Environmental Protection Award and Penalty System. Environmental Protection Award and Penalty System". x month in accordance with the "xxx province," "twelfth five-year plan" heavy metal pollution reduction ledger filing technical specifications" requirements, the establishment of heavy metal pollution reduction ledger. x month in accordance with the "occupational health file management specifications" requirements, re-improvement of occupational health files. By constantly improving the effectiveness of the system to ensure the smooth acceptance of the work, but also make the month of x month environment, occupational health and safety management system annual supervisory audit successfully passed. 10-11 months to establish and improve the company's hazardous waste management accounts, the development of "waste oil temporary storage place management regulations", "waste oil leakage emergency plan", "solid waste pollution prevention and control of environmental responsibility system.
Four, strengthen the daily security hidden danger inspection, deepen the safety supervision
The Ministry of Safety and Environmental Protection based on the actual production of the company, according to the seasonal occurrence of accidents, the fluctuation of pre-holiday personnel thought to carry out safety professional inspection. 20xx carry out the "New Year's Day", "Spring Festival", "the", "the", "the", "the", "the", "the", "the", "the" and "the". In 20xx, "New Year's Day", "Spring Festival", "May Day", "Mid-Autumn Festival", "Eleven" pre-holiday safety inspection x times, **** investigation The safety of hidden dangers xx.
Daily around the production process, infrastructure, operating environment, means of prevention and control, labor discipline, especially during the emergency repair of the mineral furnace cross operating points, high-risk operations, the site environment, such as the existence of the weak links to carry out safety, environmental protection hidden danger investigation and rectification work. Problems found fixed people, fixed time, fixed measures to rectify. Daily inspection of safety hazards xx. Since January to December **** counted rectification of safety hazards xx.
Through continuous safety inspections, the level of safety infrastructure work at SEGi Castle Peak has been improved, accident prevention measures have been strengthened, and hidden accidents have been eliminated or effectively monitored.
V. Strengthen equipment maintenance, enhance the skills of operators to ensure that equipment operation safety
The company put into operation for x years, a lot of production equipment into the aging of the sick high incidence period, in order to ensure that the normal operation of the equipment and the operator's safety, to strengthen the equipment of the daily safety inspections. x mid-month to contact the xxx lifting company's In mid-x months, we contacted the technical personnel of XXX Crane Company and the maintenance personnel of traveling workshop to change the main lifting brake of 140T traveling hook of XXX factory from single brake to double brake. from April to November, we urged the equipment department to contact the Municipal Bureau of Quality Supervision for the annual inspection of the company's special equipments. On the re-inspection of the problems occurring in the arrangement of regular rectification, while requiring the use of special equipment units to strengthen the daily inspection and maintenance of equipment parts and safety accessories to ensure the normal operation of the equipment.
In order to fully understand the company's special operators operating license licensing situation, xx month joint production departments of the company's special operators to check the documents, basically meet the licensing requirements. At the same time, the company will be required to recruit special operators to make a good entrance, and will be a copy of the documents reported to the Ministry of Safety and Environmental Protection for the record.
For xx mine heat furnace slag silo shedding accident, 10-November on the failure of maintenance, the use of more frequent safety inspections of equipment, especially due to the poor production environment caused by rust and corrosion, shorten the service life of the equipment and facilities, such as flushing slag circulating pool around the cable bridge, gas piping, etc. included in the scope of the focus of the investigation, and found that the problem in a timely manner to require the departments concerned to carry out repairs, Reinforcement. At the same time, the equipment inspection personnel must be strictly in accordance with the equipment inspection table listed in the project check one by one, to ensure that the equipment operation and personnel operating safety, so as to protect the production of normal and orderly.
Six, for the special climate and accidents, to carry out special safety inspections, activities
For the 2, 3, 11, December haze weather, low air pressure, haze dispersal of slow, air convection, the Department of Safety and Environmental Protection arranged for safety management personnel of nickel-iron plant gas fugitive area of real-time monitoring, the scene of the operation must be more than x people on the Ensure that the employee operating environment in a controlled state.
In response to the rainy and humid weather and high-temperature sweating weather prone to electric shock accidents, x month xx and x month led by the Department of Safety and Environmental Protection and joint electrical professional and technical personnel of the plant mobile electrical equipment (especially fans), the standardized use of hand-held power tools, the temporary use of electricity, welding machines, welding handle line insulation measures, such as operations in strict accordance with the requirements of the Code of Practice on the use of electricity for safety operations, etc. to carry out a special inspection. The company's website has been updated with the latest information on the latest developments in the field.
In response to the dry weather, x months, xx months of the plant's fire extinguishers, fire boxes equipped with water belts and water guns and other fire equipment equipped and used to check, fire extinguishers appear leakage, leakage of powder phenomenon in a timely manner to replace, to ensure that emergencies occur, the fire fighting equipment belongs to the available state.
With the advent of the hot weather in May, in order to prevent and control the phenomenon of heat stroke, the procurement of ten drops of water, Rendan, glucose and other drugs, ready to heat stroke medicine, from the health care measures to do a good job of preventing heat stroke and cooling work.
x month for xxx technology staff drowning accident, safety and environmental protection department of the company's slag pool and circulating pool of the operating platform protection rails, site potholes, drowning emergency equipment and other hidden dangers of safety special investigation, the problems identified on-site has been asked to rectify the Ministry of Water Resources.
In response to the xx "xx" accident, the xx plant automobile maintenance area maintenance personnel to standardize the operation, the placement of spare parts, the site operating environment, storage of flammable and explosive substances, fire equipment equipped with special inspections.
November-December for the night there are sleeping, off duty, easy to work accidents. Arrangements for safety managers on night duty to spot-check the night shift labor discipline situation, the implementation of the xxth found education-based, the xth time more than the hair
Now began to assess. From the xth spot check found dozens of times discipline, to the back of a few times and even found no discipline phenomenon, to further improve the night shift production efficiency, to ensure that the night shift during the safety of zero accident.
By carrying out a series of safety special inspection activities, some potential problems and weaknesses can be found in a timely manner. The problems identified in a timely manner to develop effective preventive and control measures, investigation, management, rectification. So that managers from the heart to produce a sense of urgency, more sober and see the work of the shortcomings and omissions, and always keep in peace, prevention is better than cure of the empty cup mentality; to improve the company's safety situation, really nip accidents in the bud, and put an end to all kinds of safety accidents.
Seven, strengthen the safety and environmental protection training, improve safety and environmental protection awareness, to create a safe and environmentally friendly atmosphere
Since January to December, the Ministry of Safety and Environmental Protection of the new plant personnel, conversion post, take a long vacation resumption of duty personnel xx people for the company-level safety training.
x month xx organization of the production department shift manager above management xx people to xx City Fire Department to participate in intensive places of fire safety training.
In order to create a good safety atmosphere in the month of safety, combined with the actuality of each production department itself, purchasing some safety albums, CD-ROMs and other educational materials have been distributed to all departments, making full use of the pre-shift activity meeting, organizing the positions of employees to study the educational materials, improve safety awareness and self-protection awareness.
x month x day invited xx city hospital director expert to carry out work injury medical first aid knowledge lecture, xx people to participate. 7 month safety and environmental protection department requisition computer cardiopulmonary resuscitation simulator, require all employees in accordance with the standard design of cardiopulmonary resuscitation, simulation in the process of resuscitation airway whether to let go of the chest, chest pressure position, pressure strength is correct, artificial respiration blowing into the tidal volume of gas is sufficient, to the correct and wrong The operation language prompts, employees can easily, effectively and quickly learn CPR. Through the first aid training to improve the company's employees' first aid awareness and ability.
In order to enhance the company's driving staff awareness of traffic safety and the legal system, learn to self-protection, civilized driving, x month xx organization xx people to participate in the road traffic safety knowledge seminar.
Safety and Environmental Protection Department year-end work summary (3)
20xx in the general manager of the direct leadership of the management of the departments has been the safety of production in the first place, conscientiously carry out the implementation of the "safety first, prevention first, comprehensive management" of the security policy, basically completed the beginning of the year to formulate the safety of the production of the work plan, but there are still some seemingly simple, but not yet completed, and the work of the company has been completed. There are still some seemingly simple, seemingly uncomplicated hidden dangers have not been completely eradicated, such as the production of leakage, habitual violation of the rules by employees, these hidden dangers continue to appear, the reason for this, we believe that part of the staff to treat the safety of the production of the attitude is not serious, the need to continue to strengthen the training and education. Looking back at this year our safety management mainly did the following aspects of the work:
First, a clear security goals, the implementation of security responsibilities
20xx year basically completed the company early in the formulation of the production safety goals: serious accidents for zero; occupational disease rate of zero; no death, serious injury, poisoning accidents; minor injuries and general accidents 7, of which one was a minor injury, and the other was a minor injury. and 7 general accidents, one of which was a traffic accident. The number of major pollution accidents is zero. In order to strengthen the organization and leadership of the work of production safety and strengthen the management of production safety, at the beginning of the year, the Department of Safety and Environmental Protection and the company's departments, teams and employees signed the "production safety target management responsibility", the safety objectives layer by layer refinement, quantification, implementation to each person, the production safety responsibility signed to all employees, the signing rate of 100%. The formation of the leadership of the total responsibility, the departments, team leaders focus on the responsibility of the safety management system.
Second, strengthen the environmental protection rectification efforts, and strive to complete before the end of the year, the bonded area safety and environmental protection bureau issued by the three waste management objectives
In response to the odor around the plant, the poor collection of exhaust gases, the company's synthetic section of the sampling and venting valves for centralized recycling and processing, on the one hand, recycling of solvents, and on the other hand effectively reduce the concentration of exhaust gas emissions. The company has centralized the recycling treatment for the sampling air valve of the synthesis section. Solid Waste DisposalSince the former XX City GREE Industrial Solid Waste Disposal Co., Ltd. is incapable of dealing with distillation residue, we contacted XX City XXX Co., Ltd. in xx month, and signed a contract for hazardous waste disposal.At the end of xx month, we signed a contract for installing online monitoring system for rainwater discharge with XX Co., Ltd. and XXX Branch. In accordance with the requirements of the Environmental Protection Bureau, the establishment of wastewater, waste gas, solid waste related accounts and files for better management.
Three, safety training, safety education
In order to fully implement the "safety first, prevention first, comprehensive management" approach to safety work, 20xx focus on strengthening the staff's safety education and training efforts.
1, the organization of the new employees into the plant "three-level" safety education, from the national legal system, the company's rules and regulations, to the workshop site management, labor discipline implementation and safe operating procedures training, the annual cumulative total of training for new entrants to the plant xx people; strengthen the production of front-line staff safety training, basic monthly training, to provide them with more than one round of training. More than one round of training, to instill in them the knowledge of production safety, so that they recognize the importance of production safety from the essence of the beginning of the year to develop a safety training plan, the total **** training for the year xx times, and they were assessed, the qualification rate of 100%. To enter the plant construction . Outsourcing personnel signed a safety construction agreement with them, the construction staff before the start of the safety knowledge training, a total of x times throughout the year.
2, in June of the safety month activities, active production safety activities, through the posting of brochures, safety knowledge training, so that employees deepen the understanding of safety work, and gained certain results.
3, the company's safety and environmental protection department formulated a dangerous chemical fire accident emergency rescue drill program, in x month carried out a fire accident emergency rescue drill, not only to teach the staff emergency rescue methods, but also make the staff learn the correct use of fire extinguishing equipment, and achieved better results, all employees participated in this drill.
4, safety inspection
1, safety inspection is the main means of eliminating potential accidents, 20xx **** organization of various types of safety inspections at the factory level xx times, the Ministry of Safety and Environmental Protection Department to organize the relevant departments to carry out a weekly safety inspections, the Ministry of Safety and Environmental Protection staff daily site inspections, weekly meetings of the production safety, in a timely manner on the inspection of the accident found in the hidden dangers of the corrective action and to set out the rectification of the completion time. In 20xx **** found all kinds of accident hidden danger xx, invested in rectification funds xx million yuan, effectively avoiding the occurrence of various types of accidents.
2, in order to implement the company's rules and regulations, to improve the staff's awareness of production safety, the Department of Safety and Environmental Protection organized by the Ministry of Administration, the Ministry of Production and other relevant departments to carry out night checking, no less than once a week, no less than x times a month, the investigation and punishment of violation of xx people, respectively, made the punishment and education.
5, production safety, environmental protection facilities investment
1, 20xx year company total **** to buy safety production liability insurance xx people, the total cost of xxx yuan;
2, the total cost of fire equipment purchases and maintenance of xxx yuan;
3, lightning facilities testing fees xxx yuan;
4, the purchase of walkie-talkies xx units, the cost of xxx yuan;
5, the cost of employee medical examination xxx yuan;
6, all kinds of labor defense supplies xxx yuan.
7, stormwater discharge online detection device is expected to xxx yuan.
In summary, in the past year, the Department of Safety and Environmental Protection and related departments have done a lot of work in safety and environmental protection to ensure the smooth progress of the company's various production activities, and achieved certain results. However, there are still some problems, such as habitual violation of rules by employees, poor quality of individual employees, management is not in place, poor safety awareness, etc., all of which we need to pay special attention to in the new year, and must not be sloppy. Looking forward to 20xx, we will continue to consolidate the achievements, seriously do their own work, the implementation of "safety first, prevention first, comprehensive management" of the security policy, in the new year focus on the following work:
1, the full implementation of the production safety responsibility system, signed the layer by layer in the 20xx year safety Production responsibility letter signed at all levels of 20xx, seriously implement the safety management system. First-line employees each implement the purchase of production safety liability insurance.
2, to further strengthen the new and old staff safety knowledge training, consolidate staff safety awareness.
3, continue to deepen the special rectification of hidden production accidents, and further implement the standardized site management of safety, regularly organize safety inspections, strengthen the site inspection efforts to nip hidden accidents in the bud.
4, strengthen the management of emergency rescue work, for the possible fire, poisoning and other types of emergencies, in accordance with the duties and requirements of the emergency rescue plan, safety training for all employees, the organization of arrangements for 1 - 2 times the leakage of hazardous chemicals, fire accident emergency rescue drills.
5, do a good job of employee occupational health monitoring, regular organization of occupational health checkups, sound employee occupational health files and health monitoring files, to prevent occupational diseases.
6, continue to do a good job of "three wastes" management, to prevent environmental accidents.
Safety work is a hard, long-term task, need to be *** with to complete, only everyone has a sense of production safety, the formation of self-protection mechanism, in order to effectively prevent accidents in production, better promote the smooth progress of production.