1. The first step is to prepare a small spray bottle, add white vinegar to the small spray bottle example, then add alcohol, and then pour a little detergent. The vinegar can soften the dirt, the alcohol can sterilize, and the detergent can remove the dirt.
2. The second step, the mixed solution in the small spray bottle shaking evenly, shaking evenly after you can see the surface of the mixed solution of white foam floating, and then cover the spray bottle head, the next step.
3. The third step, the solution will be evenly sprayed in the rubber sealing ring on the location of mold, spraying is completed, need to be left for 1-2 minutes to let the solution to give full play to its role, and then proceed to the next step.
4. The fourth step, prepare a toothbrush with hard bristles, the solution was left for 1-2 minutes after the moldy rubber sealing ring brushing again, and then use a cloth to dry the rubber sealing ring or dry.
5. The fifth step, after drying, the rubber seal if there is a place is not clean, you can pour the baking soda in the place not clean, and then use a brush to scrub or scrub with a rag, until the rubber seal is clean.
6. Sixth step, after scrubbing again, the rubber ring into the sun or natural air drying, if the rubber ring on the smell of mold is very serious, cleaning can not make it taste completely disappear, you can use water to cook a little bit of water to put some orange peel, orange peel is able to get rid of the odor.