Hello, CNC machining centers are now widely used in the machining field. Mainly used in the following industries
1. Mold
The former mold production mostly by hand, need to use plaster to make samples, and then billets to make models. With a planer planing and grinding smooth and then by hand or carving machine to sample carving out the shape of the product mold. The whole process requires a high level of skill on the part of the processor and is quite time-consuming, and once a mistake is made, it cannot be modified and all the previous work is lost. Processing center can complete a variety of processes, processing efficiency is incomparable to manual operation. Before processing with computer design graphics, simulation testing of the workpiece processing whether it meets the requirements, through the test piece of timely adjustment, greatly improving the fault tolerance rate, reducing the error rate. It can be said that the machining center is the most suitable machinery and equipment for mold processing.
2. Box-shaped parts
Complicated shape, the internal cavity, the volume is larger and has more than one hole system, the internal cavity length, width, height has a certain ratio of parts suitable for CNC machining center.
3. Complex surfaces
Machining centers can be a clamping, in addition to the clamping surface to complete the processing of all the sides and top surfaces, different models of different machining principles are also different, the spindle or table with the workpiece can be completed to rotate 90 ° of the processing. Therefore, machining centers are suitable for processing cell phone parts, automotive parts, and aerospace materials. Such as cell phone back cover shell, engine shape and so on.
4. Shaped parts
Machining centers can set the clamping, can complete the drilling, milling, boring, expansion, reaming, rigid tapping and other processes into one. For the need for point, line, surface multi-station mixed processing, irregular shape of the parts shaped parts, machining centers are the most suitable machinery and equipment.
5. Plate, sleeve, plate parts
Machining centers in accordance with different spindle mode of operation for the keyway, radial holes or end face with the distribution of the hole system, curved surface of the plate sleeve or shaft parts, such as flanged bushings, with a keyway or square head of the shaft parts, etc.. There are also plate parts with more holes processed, such as various motor covers. Distribution of holes in the end face system, curved surface of the disk parts should choose vertical machining centers, radial holes in the optional horizontal machining centers.
6. Cyclical mass production of parts
The machining time of the machining center generally consists of two parts, one is the time required for processing, and the other is the machining preparation time. The preparation time occupies a high proportion. This includes: process time, programming time, part trial time and so on. The machining center can store these operations for later repeated use. In this way, this time can be saved when the part is machined later. The production cycle can then be shortened considerably. Therefore it is particularly suitable for mass production of orders.
Welcome to adopt if it helps you
Reference CNC machining center http://www.skjgzx.org