Synchronous belt drive can be used for transmission of precision occasions?

Timing belt drive is composed of a ring belt with equally spaced teeth on the inner circumference surface and a wheel with a corresponding match. It combines the advantages of belt drive, chain drive and gear drive. When rotating, the power is transmitted by meshing the belt teeth with the grooves of the wheel. Synchronous belt drive has an accurate transmission ratio, no slip, can obtain a constant speed ratio, smooth transmission, vibration absorption, low noise, transmission ratio range, generally up to 1:10. Allowable linear speed of up to 50M / S, the transfer of power from a few watts to a hundred kilowatts. Transmission efficiency is high, generally up to 98%, compact structure, suitable for multi-axis transmission, no lubrication, no pollution, so it can be not allowed to have pollution and the working environment is relatively poor under the normal work of the place. This product is widely used in textile, machine tools, tobacco, communication cables, light industry, chemical industry, metallurgy, instrumentation, food, mining, petroleum, automotive and other industries in various types of mechanical transmission. Adopt synchronous belt standard, synchronous belt wheel standard: GB11361, GB11357, GB11362, GB3931.3, GB/T13487-2002 in line with the "ISO" 5274~1989 standard rubber synchronous belt according to the use of automotive synchronous belt and industrial synchronous belt. It uses neoprene rubber, glass fiber rope and nylon elastic cloth made of three main materials, is used for all kinds of mechanical transmission power of a special rubber transmission belt, it is the use of the belt teeth and pulley teeth of the anastomosis of the transmission, and therefore has the gear transmission, chain transmission and belt transmission of the three integrated characteristics. The use of rubber synchronous belt transmission has the following advantages: to ensure that the transmission wheel is no slip between the synchronous transmission transmission speed ratio can reach 10, transmission speed up to 40m / s transmission power can be from a few watts to thousands of watts transmission structure is simple, lightweight, and no lubrication is not required does not require a large initial tension, the shaft load is small running noise is low maintenance is simple, easy to replace and so on and thus the rubber synchronous belt has been in the automotive, chemical fibers, textile machinery, cigarette machinery, paper making machinery, printing machinery, chemical engineering, printing machinery, chemical engineering, printing machinery and so on. Rubber synchronous belts have been widely used in automobile, chemical fiber, textile machinery, cigarette machinery, papermaking, printing machinery, chemical industry, light industry, food, food, machinery, mining, metallurgy, iron and steel machinery, office equipment, medical equipment, communication equipment, and a variety of precision machine tools, precision instruments and other aspects. Polyurethane synchronous belt: It can be divided into AT5, AT10, T5, XH, H, L, XL, 3M, 5M, 8M, S5M, S8M and other open and splice synchronous belt. They are widely used in various industries, such as ceramics, food, stone, tobacco, woodworking, printing, textile packaging and so on. Polyurethane synchronous belts can be produced into rolls of open-end belts and interface belts. Open-end belts: The finished open-end belts are of continuous length with a steel wire core in the center parallel to both sides. The standard roll length is 50 or 100 meters to be connected to a loop belt: Interface belts are loop belts processed from open-end belts based on thermoplastic properties and can be connected to any length of loop belt. Its or V-shaped interface design allows the belt's interface to withstand high tensile forces. Synchronous belt pulleys are widely used in machine tools, textile, tobacco, packaging machinery, petrochemical, instrumentation, electronic products, metallurgy and other industries for mechanical transmission. We can customize and open mold processing according to customer's drawings and material requirements. The materials used for the pulleys are mainly: aluminum alloy, steel C45 and cast iron G22, nylon, aluminum, copper and so on.