Problem: The dial-up network cannot be connected because the device is not installed correctly or is in use.
Reason: RasPPPoE is not completely installed correctly.
Solution: Uninstall any PPPoE software and then reinstall it.
Error 605 Unable to set port information.
Problem: Dial-up network can't set the usage port due to equipment installation error.
Reason: RasPPPoE is not completely installed correctly.
Solution: Uninstall any PPPoE software and then reinstall it.
Error 606 Port not connected.
Problem: Dial-up networking cannot connect to the required device port.
Reason: RasPPPoE is not completely installed correctly, the connecting cable is faulty, and the ADSL modem is faulty.
Solution: Uninstall any PPPoE software, reinstall it, and check the network cable and ADSL modem.
Error 608 Device does not exist.
Problem: Dial-up networking device does not exist.
Reason: RasPPPoE is not completely installed correctly.
Solution: Uninstall any PPPoE software and then reinstall it.
Error 609 Device type does not exist.
Problem: Unable to determine the type of dial-up networking device.
Reason: RasPPPoE is not completely installed correctly.
Solution: Uninstall any PPPoE software and then reinstall it.
Error 6 1 1 Route Unavailable /6 12 Route Unassigned.
Problem: The dial-up network connection is routed incorrectly.
Reason: RasPPPoE is not completely installed correctly, and the ISP server is out of order.
Solution: Uninstall any PPPoE software and then reinstall it.
Error 6 17 The port or device has been disconnected.
Problem: The dial-up networking device has been disconnected.
Reason: RasPPPoE is not completely installed correctly, ISP server failure, cable and ADSL modem failure.
Solution: Uninstall any PPPoE software, reinstall it, and check the network cable and ADSL modem.
Error 6 19 problem: unable to establish connection with ISP server.
Reason: ADSL ISP server failure, ADSL telephone line failure.
Solution: Check whether ADSL signal lights can be synchronized correctly.
Error 62 1 Unable to open the phone book file.
Error 622 Unable to load phone book file.
Error 623 Phone book entry not found.
Error 624 Unable to write phone book file.
Error 625 Invalid information found in the phone book.
Problem: Windows NT or Windows 2000 Server network RAS network component failure.
Reason: Uninstall all PPPoE software and reinstall RAS network components and RasPPPoE.
Error 629, another computer has been disconnected. Please double-click this connection and try again.
If this problem occurs, the situation will be more complicated, because there are many situations that will lead to "error 629", most of which are caused by too many people dialing in at the same time. In addition, all default settings should be adopted in your dial-up connection settings, such as "Enable software compression" and "Log on to the network". Generally speaking, this situation may also be due to the performance and quality problems of the modem or telephone line you use, which prevents you from establishing a good connection at the communication rate you choose. In another case, if the anti-theft function of your mobile phone is turned on, there will be a handshake tone of the modem when dialing, but an error 629 will appear after the handshake tone. If the extension calls, the mobile phone will call the police, just turn off the anti-theft function.
Error 630
Problem: ADSL modem is not responding.
Causes: ADSL telephone line failure, ADSL modem failure (power supply is not connected, etc.). )
Solution: Check ADSL equipment.
Error 633
Problem: The dial-up network cannot be connected because the device is not installed correctly or is in use.
Reason: RasPPPoE is not completely installed correctly.
Solution: Uninstall any PPPoE software and then reinstall it.
Error 638
Problem: after a long time, I can't connect to the ADSL access server of ISP.
Reason: ISP server failure; In the wrong connection created by RasPPPoE, you entered a phone number by mistake.
Solution: Run the dial-up Raspppoe.exe it created to check whether ISP services can be listed to ensure that the ISP is normal; Clear the phone number in the dial-up connection you are using or keep only 0.
Error 645
Problem: The network card is not responding correctly.
Cause: Network card failure, or network card driver failure.
Solution: Check the network card and reinstall the network card driver.
Error 650
Problem: The remote computer is not responding. Disconnect.
Cause: ADSL ISP server failure, network card failure and abnormal shutdown lead to network protocol error.
Solution: Check whether ADSL signal lights can be synchronized correctly; Check the network card, remove all network components and reinstall the network.
Error 65 1
Problem: The ADSL modem reported an error.
Reason: Windows is in safe mode, or there are other errors.
Solution: When this error occurs, redial and you can report a new specific error code.
Error 676, the line is busy. Please try again later.
Please check whether there is anything wrong with the telephone line first. Please unplug the telephone line and connect it directly to the phone. Dial the phone number of the ISP you want to call (for example, 163, 169), and hear a scream similar to a fax sound in the receiver. If there is such a sound, it means that your mobile phone can dial up the Internet. Please make sure it is in My Computer. "dial-up network"->; The phone number in "XXX connection (your dial-up connection)" has no other digits before the ISP phone number. If you dial through an extension, you need to add an outside number and a comma before the phone number, for example, "0, 163". If the receiver is busy and the busy audio rate is extremely high.
Error 678, the dial-in computer did not answer.
This situation is a bit like busy, mostly by accident. Sometimes this is caused by dialing as soon as the modem is turned on. Please make sure to plug the telephone line (the one connected to the telephone office) into the "line" interface of the modem first. Check whether there is anything wrong with the telephone line. Please unplug the telephone line and connect it directly to the phone. Dial the phone number of the ISP to be dialed (such as 163, 169) by phone, and listen to the screams similar to fax sound in the receiver. If there is such a sound, it means that your mobile phone can dial up the Internet. Please confirm "My Computer"->; "dial-up network"->; The phone number in "XXX connection (your dial-up connection)" has no other digits before the ISP phone number. If you dial through the switchboard, you need to add an outside number and a comma before the phone number, for example, "0, 163". If the line is busy, please contact ISP customer service department. If there is no sound or hint that you can't dial this phone number, there is something wrong with your phone line.
Error 680 No dial tone.
When this error occurs, please check whether the modem is properly connected to the telephone line, and then check the following:
1. Check whether the telephone line is connected first. If no problem is found, please unplug the telephone line and connect it directly to the telephone. Try to dial the ISP phone number you want to dial by phone (for example, 163, 169), and hear a scream similar to a fax sound in the receiver. If there is such a sound, it means that your mobile phone can dial up the Internet. Maybe you just dialed. If the line is busy, please contact ISP customer service department. If there is no sound or hint that you can't dial this phone number, there is something wrong with your phone line.
Error 69 1
Problem: The user name and password entered are incorrect, so the connection cannot be established.
Reason: wrong user name and password, ISP server failure.
Solution: Use the correct user name and password, and use the correct ISP account format (name @ service).
Error 7 18
Problem: The remote computer did not respond when verifying the user name, so it was disconnected.
Reason: ADSL ISP server failure.
Solution: Call 2022370.
error 720
Problem: Dial-up networking cannot coordinate the protocol settings of servers in the network.
Reason: The ADSL ISP server failed, and the abnormal shutdown caused the network protocol error.
Solution: Remove all network components and reinstall the network.
error 734
Problem: PPP connection control protocol aborted.
Reason: The ADSL ISP server failed, and the abnormal shutdown caused the network protocol error.
Solution: Remove all network components and reinstall the network.
Error 738
Problem: The server cannot assign an IP address.
Reason: ADSL ISP server failure, ADSL users exceed the IP address that ISP can provide.
Solution: Call 2022370.
Error 797
Problem: ADSL modem connection device cannot be found.
Reason: ADSL modem power is not turned on, there is something wrong with the connection line between the network card and ADSL modem, the corresponding protocol is not properly bound after installing the software, and the wrong null connection is established when creating the dial-up connection.
Solution: Check the power supply and connecting wire; Check the network properties, whether the related protocols of RasPPPoE are correctly installed and bound (related protocols), and check whether the network card appears. No. or! Number, set it to enable; Check the properties of the dial-up connection, and check whether the connected device uses the ISDN Channel-Adapter Name (xx) device, which is an empty device. If it has been used, please cancel it, choose the correct PPPoE device to replace it, or re-create the dial-up connection.
I know the wrong code of ADSL login. Now more people surf the Internet at home ... Most people dial numbers by ADSL or telephone ~ ~ You won't think of them when there is no problem ... What if one day you set up online and you encounter the wrong code? For example, the wrong number 679 ~ ~ implies that you can't use the network normally, and you don't know what it means ... Let's find out.
You can also enter: 679 in Help and Support on the Start menu.
This will give you the fastest solution ... personally, it is very practical ~ ~
600 An operation is in progress.
60 1 An invalid port handle was detected.
The port specified by 602 is already open.
The 603 caller buffer is too small.
604 specifies the wrong information.
605 Unable to set port information.
The port specified by 606 is not connected.
607 An invalid event was detected.
608 specifies a device that does not exist.
609 specifies a device type that does not exist.
6 10 specified an invalid buffer.
6 1 1 specified an unavailable route.
6 12 specifies an unallocated route.
6 13 specified invalid compression.
6 14 has insufficient available buffer.
6 15 cannot find the specified port.
6 16 An asynchronous request was suspended.
The 6 17 modem has been disconnected.
The port specified by 6 18 is not open.
The port specified by 6 19 is not connected.
Unable to determine the end point.
62 1 The system cannot open the phone book.
The system could not load the phone book.
The system could not find the phone book entry for this connection.
The system could not update the phone book file.
The system found invalid information in the phone book.
Unable to load string.
627 Unable to find the keyword.
The connection is closed.
The 629 connection was closed by the remote computer.
The modem was disconnected due to hardware failure.
63 1 The user disconnected the modem.
632 Incorrect structural dimensions have been detected.
The 633 modem is in use or not configured to dial out.
Your computer cannot be registered on the remote network.
An unknown error occurred in 635.
The device connected to the port is not the expected device.
637 A string that cannot be converted was detected.
The request timed out.
639 asynchronous network is not available.
A NetBIOS-related error occurred in 640.
64 1 The server could not allocate NetBIOS resources needed to support the client.
The NetBIOS name of the 642 computer has been registered on the remote network.
643 The network adapter on the server side has failed.
You will not be able to receive network pop-up messages.
645 An internal validation error occurred.
This account is not allowed to log in now.
This account has been disabled.
The password for this account has expired.
Account number 649 has no permission to dial in.
The 650 remote access server is not responding.
The 65 1 modem reported an error.
652 has an unrecognized response from the modem.
The macro required by the modem cannot be found in the 653 device. INF file section.
A command or response in a device. The INF file partially refers to an undefined macro.
655
657 Unable to open the device. INF file.
The device name in the device. INF or media. The INI file is too long.
659 media. The INI file refers to an unknown device name.
660 equipment. The INF file does not contain a response to the command.
66 1 equipment. The INF file is missing a command.
An attempt was made to set a macro that is not listed in the device. INF file section.
663 media. The INI file refers to an unknown device type.
The system is out of memory.
The modem is not configured correctly.
The 666 modem is not working properly.
The system cannot read the media. INI file.
The 668 connection was terminated.
Usage parameters in 669 media. The INI file is invalid.
The 670 system cannot read some names from the media. INI file.
67 1 The system cannot read the device type from the media. INI file.
The system cannot read the device name from the media. INI file.
The system cannot read the usage from the media. INI file.
The 674 system cannot read the maximum connection rate (bps) from the media. INI file.
The 675 system cannot read the maximum operator connection speed from the media. INI file.
Telephone line 676 is busy.
Someone answered the phone, not the modem.
678 didn't answer.
The 679 system cannot detect the carrier.
680 has no dial tone.
The 68 1 modem reported a general error.
69 1 Access is denied because the user name and/or password are invalid on this domain.
The 692 modem has a hardware failure.
The 695 state machine is not started.
The 696 state machine has been started.
The response loop did not complete.
The response of the 699 modem caused a buffer overflow.
Extended commands in 700 devices. INF file is too long.
COM driver does not support the connection speed used by 70 1 modem.
The 703 connection requires you to provide information, but the application does not allow user interaction.
The 704 callback number is invalid.
The 705 authorization status is invalid.
707 has an error related to the X.25 protocol.
708 account expires.
709 An error occurred while changing the password on the domain. The password may be too short, or it may be the same as the previous password.
7 10 detected a sequence overflow error when communicating with the modem.
7 1 1 Unable to start Remote Access Service Manager. Additional information is provided in the event log.
7 12 dual port is initializing. Wait a few seconds before redialing.
7 13 has no active ISDN line available.
7 14 has no ISDN channel to dial.
7 15 There are too many errors due to the poor quality of the telephone line.
7 16 remote access service IP configuration is not available.
7 17 There is no IP address available in the static pool of IP addresses of the remote access service.
7 18 The connection timed out while waiting for a valid response from the remote computer.
The 7 19 connection was terminated by the remote computer.
72 1 The remote computer is not responding.
Invalid data received from the remote computer. The data is ignored.
The phone number (including prefix and suffix) is too long.
726 IPX protocol cannot be used to dial out on multiple modems at the same time.
The 728 system cannot find the IP adapter.
SLIP cannot be used unless the IP protocol is installed.
73 1 has no configuration protocol.
The PPP control protocols of your computer and the remote computer are inconsistent.
The PPP control protocols of your computer and the remote computer are inconsistent.
734 PPP link control protocol was terminated.
The server rejected the requested address.
The remote computer terminated the control protocol.
Loopback detected.
The 738 server has no assigned address.
739 The authentication protocol required by the remote server cannot use the stored password. Please redial and enter the password clearly.
740 An invalid dialing rule was detected.
74 1 The local computer does not support the required data encryption type.
The remote computer does not support the required data encryption type.
The remote server needs data encryption.
The 75 1 callback number contains invalid characters. Only the following characters are allowed: 0 to 9, t, p, w, (,),-,@ and spaces.
A syntax error was encountered while processing the script.
Cannot disconnect because it was created by a multi-protocol router.
The 754 system cannot find the multi-link package.
Because this project specifies a custom dialer, the system cannot perform automatic dialing.
756 has dialed the connection.
The 757 Remote Access Service cannot be started automatically. Additional information is provided in the event log.
Internet connection * * * has been enabled on this connection.
760 An error occurred while enabling the routing function.
76 1 Error enabling Internet connection * * * Sharing connection.
.. 763 cannot enable Internet connection * * * Enjoy. In addition to the connection to enjoy, there are more than two LAN connections.
.. no smart card reader is installed.
.. 765 cannot enable Internet connection * * * Enjoy. The LAN connection has been configured with the IP address required for automatic IP addressing.
.. 767 cannot enable Internet connection * * * Enjoy. The selected LAN connection on the private network is configured with multiple IP addresses. Please reconfigure the LAN connection with a single IP address before enabling the Internet connection * * *.
.. 768 Connection attempt failed due to data encryption failure.
The designated destination .. 769 is inaccessible.
.. The remote machine refused the connection attempt.
.. 77 1 The connection attempt failed due to the busy network.
.. 772 The network hardware of the remote computer is not compatible with the requested call type.
.. 773 The connection attempt failed because the target number has changed.
.. 774 temporary failure caused the connection attempt to fail. Please try connecting again.
.. 775 call was blocked by the remote computer.
.. 776 The call could not be connected because the target called the Do Not Disturb function.
.. 777 The modem on the remote computer failed, which caused the connection attempt to fail.
.. 778 Unable to verify the identity of the server.
.. 780 attempted to use a function that is not valid for this connection.
.. 783 cannot enable Internet connection * * * Enjoy. The LAN connection selected as the private network does not exist or has been disconnected from the network. Please ensure that the LAN adapter * * * is connected before enabling the Internet connection.
.. 784, you can't dial with this connection, because it is configured with a different user name from that on the smart card. If you want to use it when logging in, you must configure it to use the user name on the smart card.
.. 785 This connection cannot be used to dial when logging in because it is not configured to use a smart card. If you want to use it when logging in, you must edit the properties of the connection to use the smart card.
.. 788 L2TP connection attempt failed because the security layer could not negotiate compatibility parameters with the remote computer.
.. 789 L2TP connection attempt failed because the security layer encountered a processing error in the initial negotiation with the remote computer.
.. 79 1 L2TP connection attempt failed because no security policy was found for the connection.
.. 792 L2TP connection attempt failed because security negotiation timed out.
.. 793 L2TP connection attempt failed because of an error in negotiating security.
.. 794 user's frame protocol RADIUS attribute is not PPP.
.. 795 user's tunnel type RADIUS attribute is incorrect.
.. 796 users' service type RADIUS attribute is neither framing nor callback framing.
.. 797 The connection with the remote computer could not be established because the modem could not be found or was busy.
.. due to the IP address conflict on the network, the 799 Internet connection * * * enjoyment (ICS) cannot be enabled. ICS requires the host to be configured to use192.168.0.1. Please ensure that no other clients on the network are configured to use 192.5438+068.0. 1.
.. 800 cannot establish VPN connection. The VPN server may not be able to connect, or the security parameters of the connection are not configured correctly.