How to use the automatic shoe cover machine

Automatic shoe cover machine is the latest household product developed to solve the problem that people need to change shoes when entering the door. It can also be called shoe cover machine and automatic shoe cover machine. Widely used in homes, factories, model houses, hospitals, dust-free workshops, car showrooms, hotels, laboratories, computer rooms, museums and other places with cleaning requirements. As long as a person gently steps on the foot wearing shoes in the shoe cover machine, there will be a lovely shoe cover on his foot, which is both sanitary and beautiful. Let's learn about the installation and use of the automatic shoe cover machine. First, how to install the shoe cover on the shoe cover machine

1. Open the upper cover of the shoe cover machine, unfold a pile of shoe covers, pay attention to the length and width direction, pinch the folded buttons, aim at the T-shaped mouth of the shoe cover machine, and press down.

2. The shoe cover is installed diagonally, and the rubber band of the shoe cover is slightly pulled apart during installation.

3. Untie the wire tied to the shoe cover.

4. When installing the second pile of shoe covers, please untie the thread tied to the buckle of the first pile of shoe covers, then push the top buckle inward and press it down together with the second pile of shoe covers.

5, finishing the shoe covers.

Step 6 check.

Note: In step 4, you can't press these rows of buttons without pressing the top button.

Second, how to use the automatic shoe cover machine

Preparatory work:

1. First, take the automatic shoe cover machine out of the package, put it on a flat ground, unlock the lock button, and turn the baffles on both sides outward.

2. Then, press the metal bars on both sides with both hands. Until the hook hooks the lower latch.

Install the shoe cover:

1. Take out the shoe covers, make a small bundle of every ten shoe covers, and hook the ten hooks tied together on a side post.

2. Then hang the hook on the post. During operation, one hand is placed on the inner side of the shoe cover and pulled towards the column, while the other hand pushes the shoe cover machine from the outer side.

3. Hook the other two hooks to the post in turn, and finally take out the metal wire tied to the four hooks. If you need to continue installing the shoe cover, please repeat step 2.

4. Press the metal rod with the right hand, press the hook unlock button with the left hand, and then let the metal rod bounce slowly under the pressure of both hands. Then restore the baffles on both sides to the initial state.

How to use:

1. Put one foot into the shoe cover machine and press it down. Shoe covers will be worn on your feet.

2, pay attention to keep the body center of gravity, so that the center of gravity is always on the standing feet.

Note: General automatic shoe cover machine puts 50 to 100 pieces at a time. The intelligent shoe cover machine can install the whole roll of consumables, and the capacity is relatively large.