It is my pleasure to answer for you, cutting fluid centralized filtration equipment, may I ask your company is currently using the cutting fluid is oily or water-based? And whether the filtration precision requirements, you want simple filtration, or precision filtration, is the filtration precision is relatively high, such as tool grinding, ultra-precision machining and other industries on the workpiece requirements are relatively high, so the filtering of grinding oil equipment is also relatively sophisticated, if you are simple filtration, nothing to pay attention to, then you can find an ordinary filtration equipment, cheap, but to frequent replacement of the filter element. If you are more concerned about the filtration effect, the need for high-precision filtration effect, it is recommended that you use the ultra-precision filtration system. Ultra-precision filtration system filtration accuracy can reach 1 micron filtration, but the cost will be slightly more expensive than ordinary equipment, but do not need to frequently replace the cartridge. Selection of equipment depends on demand, not the cheaper the better, not the more expensive the better, suitable is the best. Xiamen Tolito environmental protection company provides ultra-precision centralized filtration system, currently serving a number of large enterprises. Filter cartridge does not require frequent replacement, the cartridge can be used for 3 to 5 years, automatic backwashing filtration equipment. Picture please refer to the filtration equipment which the filter body