Cosmetic microbial overload why conventional sterilization services can not effectively kill?

Cosmetic microbial sterilization services are very important. For women who love beauty, cosmetics are essential. In the face of a wide range of cosmetic products, through this beauty behind the medical safety issues are endless. Cosmetics are rich in nutrients and moisture, which is conducive to the growth and reproduction of microorganisms, easily contaminated by microorganisms and bacteria. And mold, spores and other microbial contamination with high resistance, conventional disinfection service methods can not effectively kill, how to effectively solve the production workshop environment microbial overload? Affected by the temperature and humidity in the workshop, cosmetics are prone to microorganisms, especially mold.? The raw materials, containers and production processes used in production are contaminated by microorganisms, especially in the filling process is more susceptible to microbial contamination. Recently, according to foreign media reports, researchers at Aston University in the UK tested 467 cosmetic samples. It was found that 90% of the cosmetics carried pathogenic bacteria and superbugs including E. coli and staphylococcus. Including used lipstick, lip gloss, eyeliner, mascara and makeup sponges, the results showed that cosmetic sponges have the most serious problems.

? Hygiene standards for cosmetic manufacturers provide that the total number of bacterial colonies in the air of semi-finished product storage room, filling room, clean container storage room, changing room during the production process should be ≤1000 cfu/m3; the total number of bacterial colonies on the surface of the workbench in the filling room should be ≤20 cfu/ m2, and the total number of bacterial colonies on the surface of the worker's hand should be ≤300 cfu/hand, and no pathogenic bacteria shall be detected. However, the current commonly used disinfection service methods such as alcohol, quaternary ammonium salts, chlorine disinfectants combined with ultraviolet light, ozone, can not solve the problem of bactericidal efficacy and residue, resulting in microbial control disinfection service is not ideal, especially the problem of germs and molds.

Reasons why spores and molds are difficult to control:

? Molds are found everywhere in nature and are widely distributed. Mold is highly resistant and difficult to kill completely by normal disinfection methods. It will propagate and multiply through tiny spores that float in the indoor and outdoor air for hours or even days. ? Mold growth is usually determined by three factors:moisture, nutrient supply and temperature. It can grow on almost any substance, even on materials without any nutrients (such as glass). Sprouts are dormant bodies of bacteria that can be transformed into nutrient cells again under the right conditions, and are the most resistant life forms in the entire living world. As a result, the resistance of the spores and molds is high, and many conventional disinfection service methods are difficult to control and kill molds and spores, which is why it is difficult to completely eradicate and control them. Then, the enterprise purification production workshop must use high efficiency kill high resistance microorganisms disinfection service method.

High-efficiency space sterilization method - vaporized hydrogen peroxide disinfection technology

? The vaporized hydrogen peroxide disinfection technology of Shanghai FANTON bio-disinfection service has broad-spectrum bactericidal ability, which can kill all kinds of pathogenic microorganisms on the surface of the workshop environment and in the air, including bacteria, Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, fungi, viruses, etc., and control the exceeding of the total number of bacterial colonies, especially for the mold spores and bacterial spores have a very good killing effect, and the high efficiency bactericidal rate can reach 99.9999% or more. 99.9999% or more, to achieve verifiable 6-log sterilization service effect.

? The company's research and development of intelligent disinfection robot kino, flexible operation, can quickly eradicate the contamination of microorganisms in the disinfection area, the workshop environment (air), equipment and instruments, plant extract raw materials, pipeline disinfection sterilization disinfection sterilization. kino adopts vaporization disinfection device, built-in wifi and remote IOT technology, omni-directional multi-hole spraying, gas diffusion uniformity, 360-degree no dead-angle disinfection, to confirm the purification of disinfection services The process uses biological and chemical indicators to verify that the space and surface reach 6-log microbial killing. Vaporized hydrogen peroxide has excellent diffusivity, reaching the parts that are hard to reach by daily wiping, including air-conditioning system, pipeline interior, internal disinfection and purification of instruments and equipment, and the gas molecules have fine particle size, invisible to the naked eye, and completely degraded to generate water and oxygen, non-toxic and non-residual to human body and the environment, without moistening the surface of the object, with good compatibility of the materials, and without damaging to the equipments and instruments. Shanghai FANTON bio-disinfection team can provide customized disinfection service solutions for disinfection enterprises, each deployment includes planning, coordination, layout, installation of equipment, cycle confirmation and verification, and provide a complete report to escort you.