1. Detectors according to the analytical testing work undertaken, responsible for its corresponding laboratory housekeeping.
2. Observe the laboratory system, keep the laboratory clean, quiet, pay attention to the table (table) surface and instrumentation neat, indoor smoking, eating, storing items unrelated to the experiment is strictly prohibited.
3. Laboratory according to the need to test the work of assembling the necessary experimental facilities to ensure that the work area of energy, lighting, ventilation to meet the needs of the work of the work of special requirements of the work area (eg, microbiology), according to the relevant requirements of the configuration of the facilities; instrumentation and equipment should be used to meet the environmental conditions of the instructions of the requirements of the temperature, humidity, anti-electromagnetic interference requirements, equipped with air conditioning and dehumidification, installation of temperature and humidity meters. Installation of temperature and humidity meter meter.
4. All kinds of instruments and equipment in the laboratory should be placed in a fixed place according to the requirements; the use of all kinds of instruments and equipment must strictly abide by the rules of safe use and operating procedures, fill in the use of the registration form, and find problems reported in a timely manner.
5. Laboratory electrical equipment, utensils should be placed in accordance with the provisions of the setup place, shall not be moved at will, the use of which must strictly abide by the rules of safe use.
6. Analysis and testing work, to understand the use of chemical reagents, instruments and their respective performance and operating procedures, make preparations for protection before starting work. The use of flammable, explosive and highly toxic reagents, must follow the relevant provisions of the operation.
7. Ensure the safety of electric lines, refrigerators, incubators and other electric lines must be separated from the laboratory electricity. The old electrical wiring or worn out wires should be replaced in a timely manner, the switch, socket and instrument grounding device should be checked frequently.
8. High-pressure gas cylinders should be set in a safe place, and be fixed. Regularly check the gas tightness of acetylene gas cylinders and leakage alarm device working condition. Various types of cylinders should be left with a safe residual amount of residual gas.
9. open-flame operation, the operator can not leave the laboratory without authorization, experiments should be completed in a timely manner to cut off the power supply, gas and fire. Before going off duty by the safety officer to check the water, electricity, fire, gas, doors and windows.
10. Concentrated acid, concentrated alkali waste liquid should be neutralized before pouring into the sewer, toxic residual liquid should be centralized according to the operating instructions for recycling.
11. Laboratory need to install a variety of essential safety facilities (fume hood, dust cover, reagent cabinets, fire fighting equipment, etc.); fire fighting equipment should be done on a regular basis, do not arbitrarily misappropriation, to ensure that at any time can be accessed; the laboratory in the event of an accidental security incident, should quickly cut off the power supply or the gas source, the source of ignition, and immediately take effective measures to deal with timely and report to the relevant leaders.
12. The new test personnel, must first be arranged to accept the safety knowledge education, learning the relevant rules and regulations.
13. Laboratory must be equipped with commonly used first-aid medicines and shower facilities, in case of emergency. Answers from