Aucma air conditioning remote control pressed no response

1, this phenomenon may be the remote control itself battery power is insufficient. 2, may be the air conditioning itself power supply abnormalities. 3, may also be the remote control itself is locked, need to be unlocked in order to return to normal. 4, there may be a reason for the air conditioning itself is unable to start the malfunction, and the remote control has nothing to do. 5, the remote control may not be able to start the air conditioning itself, the air conditioning itself, and the remote control. Suggested solutions: 1, if the remote control itself because of the battery drain caused by the air conditioning press the remote control does not respond, as long as you find the same type of battery replacement, the air conditioning can be restored to normal operation. 2, if the air conditioning itself because of the power supply system problems, you can check whether the power switch is turned on, the air conditioning power plug is loose. Then there is the power supply voltage does not reach the rated voltage of the air conditioner. If the power supply itself is a problem can not be normal power supply, you need to find a professional electrician to deal with it, do not privately dismantle the test power supply, to prevent electrocution accidents. 3, if the remote control itself is locked, as long as the unlock will be able to. Press the "mode" and "timing" two buttons can be unlocked remote control back to normal use. 4, if the air conditioner itself is faulty and can not start running normally, and the air conditioning remote control has nothing to do with, we should ask the professional maintenance personnel to detect the investigation, find out the cause of the failure, repair. The reason for the malfunction is to fix it.