All through the system certification of the enterprise in the procurement of components have special requirements for quality, and only have the strength and advanced management concepts of medical equipment manufacturers can be in accordance with the requirements of the state through the system certification, but also only such a company can guarantee the best product quality and the best after-sales service
2. Check the manufacturer's website
Understand the supplier is a professional medical equipment and disinfection equipment manufacturers, or an agent sales as the main body; to understand each ozone sterilizer manufacturer's current type and number of users; when possible, can be in the same industry to other users are using ozone sterilizers to understand their various brands of ozone sterilizers to the use of experience and evaluation
3. /p>
3. Reasonable selection of the amount of ozone generation
The amount of ozone generation is to determine whether the disinfection of the environment to achieve the desired disinfection effect is an important indicator, the amount of ozone generation will make the disinfection is not complete, the amount of ozone generation will cause excess ozone and make the price of the equipment increased. To get the most cost-effective ozone sterilizer, it is necessary to choose the ozone generation capacity reasonably according to the volume size of the place to be disinfected and the level of disinfection required. (To achieve the lowest level of disinfection, the concentration of ozone per cubic meter of disinfection volume should not be less than five milligrams. As the level of disinfection increases, the concentration per unit volume should also increase.)
4. In-depth discussion with the manufacturer
Disinfection volume, ozone concentration and air supply are a few key elements in selecting an ozone sterilizer, and different users have different combinations of elements. With the ozone sterilizer manufacturer to carry out in-depth discussions, to the manufacturer to put forward their own special combination of requirements, and then by the manufacturer according to the user to provide a few key elements of a special combination of design, so that you can get the most cost-effective equipment
5. 3 factors affecting the change in the price of the product
Ozone generation, high-frequency power supply and the amount of air supply is the key factor that directly affects the price of the product
Ozone generation, high-frequency power supply and the amount of air supply. The higher the concentration, the higher the air volume, the more the ozone generation, the more the ozone generation is. The higher the concentration and the larger the air supply, the better the disinfection effect, and the higher the frequency of the power supply, the higher the efficiency of the ozone generator. Users who are to ensure that the products they produce do not have excessive bacterial contamination and safely pass the inspection of the health supervision department, it is recommended to choose a sufficient concentration of ozone generation and air supply volume. This choice of equipment will be more expensive, but compared to the disinfection is not good, the product bacteria exceeded the standard and was ordered by the health supervision department product withdrawal, factory shutdown and rectification, huge fines and the enterprise list on the blacklist, etc., or to be much more cost-effective. After all, the brand value of the enterprise is far more than the cost of saving equipment, and a product was withdrawn from the cabinet to pay the price is far more than the cost of saving equipment tens of times.
6. Requirements for after-sales service
Users must carefully understand the details of each producer's commitment to after-sales service, try not to choose the after-sales service of their products to set limits or no after-sales service producers, otherwise it will affect the normal operation of the user's business production.