Chengdu Push Pharmaceutical Plastic Packaging Co., Ltd. was established in March 2006, adhering to the "realistic and innovative, people-oriented" management concept, the use of group management mode, the subsidiaries and business units, and strive to develop and innovate in the field of pharmaceutical packaging, medical devices, modified granules, three-in-one and so on.
Pharmaceutical Packaging Division is a mature division under Chengdu Push Medicine Plastic Packaging Co. The main production of new infusion polypropylene combination cap, polypropylene interface and other related pharmaceutical packaging products, the current production scale of plastic infusion with a combination of sealing cap 130 million, all the equipment will form an annual output of 1 billion scale, to become the largest material infusion with a combination of sealing cap manufacturers, but also the largest pharmaceutical packaging enterprises in Southwest China.
Medical Devices Division: The division is mainly involved in disposable sterile medical device supplies and high-end implantable device products. The first phase of the investment of 300 million yuan RMB to build four world advanced production lines. The production lines will be completed in 2009 and obtain ISO13485 and CE certification, FDA certification. In addition, efforts will be made to become a pilot of GMP for medical devices in China.
Currently, our main products include vacuum blood collection tubes and bi-directional blood collection needles, which are manufactured in a class 10,000 clean area. Vacuum blood collection tubes are sterilized by Co-60 and two-piece syringes are sterilized by ethylene oxide. These sterilization methods ensure the sterility of our products. 2009, our independent innovation of two-piece syringe will be put into production, compared with the traditional three-piece syringe, because it does not contain the black rubber plug, it is safer for human use, and also avoids the environmental pollution caused by burning the rubber plug. Therefore, the project is strongly supported by the State Drug Administration, and our company strives to realize an annual output of 300 million units within five years, accounting for about 50% of the market share. The business unit cooperates with Sichuan University, a famous university in China, to develop high-end implantable device products (e.g., artificial bone type, dental implant type, etc.), and to realize the development of industrialization, to promote China's medical device industry to the world, and to shape a new platform.
Pellets Division: the division focuses on independent research and development projects, mainly research and development of medical modified plastics, has made breakthroughs in modified pellets, the existing 1 extrusion **** mixing production line, can produce 2100 tons of modified plastics annually, the product meets the national standards and customer requirements. The products produced mainly include special material for medical polypropylene outer cover and special material for medical polypropylene inner cover, which ensures the stability of raw material supply for the company's clean injection molded products. Ltd. was founded in 2004, the company is located in the famous world natural cultural heritage of Dujiangyan City scenic area. The beautiful environment, fresh air, convenient transportation, and no pollution sources in the surrounding area provide a good external environment for the development and production of pharmaceutical packaging materials.
Auke now mainly produces a class of pharmaceutical packaging materials such as polypropylene combination caps for plastic infusion containers and polypropylene interfaces for plastic infusion. And in 2005, we passed the certification of the State Food and Drug Administration and were approved to obtain the national registration certificate of Class I pharmaceutical packaging materials and containers. The company has a first-class production environment, first-class production equipment, complete quality inspection system. We are adhering to the tenet of truth-seeking and innovation, people-oriented, with strict quality management and considerate after-sales service as the highest guideline of enterprise management. Push Pharmaceutical Company: The division is mainly dedicated to the commissioned production of aseptic pharmaceutical packaging, the introduction of international advanced three-in-one aseptic filling (BFS) production technology, that is, the combination of "blowing - filling - sealing" as one of the aseptic packaging technology. The project is under active construction, the main equipment has been completed bidding, the leading products are plastic small water needles, eye drops, enema, etc., is expected to start in early 2009, some products to realize sales, and accept orders for processing of related products.
Sichuan Provincial Pharmaceutical Design Institute Co., Ltd: the former Provincial Pharmaceutical Design Institute, after restructuring to become a wholly-owned subsidiary of Push Medical Plastics, Class A qualification. In the pharmaceutical engineering design and other aspects of many years of experience and strong strength, is now actively negotiating with foreign first-class engineering design and management companies to negotiate joint ventures and cooperation, and strive to become a leading domestic enterprise in the field of project engineering management and other areas. In line with the strict attitude of being responsible for consumers and society, in order to ensure that the company's products are of higher quality, Push Medical Plastics has selected the world's first-class top injection molding equipment, such as Engel motors, KraussMaffei two-platen injection molding machines, South Korea's LG motors and other first-class brands. The total number of machines will reach 76. Together with the excellent injection molding process, the injection molded products produced by our company have perfect quality.
For example, the Packaging Division has 16 sets of injection molding machines with superior performance, which are injection molded by Canadian HUSKY hot runner molds, avoiding secondary pollution caused by reuse of waste materials. Imported polypropylene granules in line with SFDA standards, chemical stability, and infusion drug incompatibility, no dissolved matter, to ensure the quality of the product company products and infusion plastic bottles, soft bags welded molding is good, no leakage and other characteristics. Push pharmaceutical companies choose the German ROMMELAG three-in-one (blowing - filling - sealing) and the United States WEILER aseptic filling system is currently widely recognized by the foreign pharmaceutical industry pharmaceutical packaging process, the entire production process to ensure that the asepsis of the production process, all of the main production steps are combined together to avoid interference with the aseptic production of the operator. The process has high quality standards and substantial savings in production costs. The equipment has a high degree of automation, completely reaching the real unmanned production. This equipment and production process has great superiority and competitiveness in terms of economy, hygiene, reliable performance and quality, and reaches the FDA's standard of aseptic production, which provides a hardware guarantee for our company's products to enter the international pharmaceutical market.
The company's molds are multi-cavity precision injection molds produced by Yibin Push Mould Company. Push Mould has the absolute technological leadership in the same field in China with the whole stream of first-class machining advanced equipment, testing equipment and special equipment to ensure that the molds of the perfect quality of the products. Together with the global first-class hot runner technology, such as HUSKY, HEITEC, MOLDMASTERS and other brands. In the two-piece syringes and other items that require high precision, we have introduced the precision molds of Swiss Plasteli with heavy investment, which makes our technology stand on the same level with the first-class enterprises in the industry, such as American BD and other companies. Precision molds, first-class injection molding machines, coupled with excellent injection technology, are destined to qualified product quality, but also further improve the quality of products. At the same time, the company pays great attention to the cultivation of talents and the improvement of software, and constantly learns from the leading enterprises in the industry about their excellent management concepts and successful experience, and introduces many excellent talents in technology and management, so as to fully prepare for the development and growth of the company in all aspects!