Simple version
One, the cause of the virus.
Two, hardware problems. For example, the power supply
three, software problems. For example, CPU temperature monitoring software.
Four, the system files are lost, caused by misuse.
Fifth, hackers attack you.
The specific solution is to redo the system, you can rule out the 1st, 3rd, 4th and 5th; if still dead, it is a hardware problem.
Professional
※Hardware reasons:
★"Poor heat dissipation": the monitor, the power supply and the CPU in the work of the heat is very large, so the body of good ventilation off the situation is very important, if the monitor is overheated will lead to the color, the image is distorted and even shorten the life of the monitor. Working time is too long will also lead to power supply or monitor heat dissipation caused by computer crash. CPU cooling is related to the stability of the computer operation of the important issues, but also thermal failure of the "hardest hit".
★"Dust killer": too much dust in the machine will also cause failure. If the floppy drive head or optical drive laser head contaminated with too much dust, it will lead to read and write errors, serious computer crash.
★"Hardware and software incompatibility": For example, 3D production and some special software, may not be able to install or start in some computers, which may have hardware and software compatibility problems.
★"Memory Stick Failure": mainly due to the loose memory stick and its own quality. The company's website is a great place to find out more about how to get the most out of your computer, and how to get the most out of your computer, so you can get the most out of your computer.
★"Hard disk failure": mainly hard disk aging or due to improper use of bad channels, bad sectors. So the machine is very easy to crash when moving the line. You can use special tools and software to troubleshooting, such as serious damage can only replace the hard disk. In addition, for motherboards that do not support UDMA66/100, you should pay attention to the setting of the hard disk operation mode in CMOS.
★"CPU overclocking": overclocking increases the operating frequency of the CPU, and at the same time, may make its performance unstable. The solution, of course, is also relatively simple - get the CPU back to its normal frequency.
★"Hardware resource conflict": It is common to see a conflict in the settings of the sound card or display card, causing abnormal errors. In addition, the interruptions, DMAs, or ports of other devices may cause a few drivers to generate abnormalities, resulting in a crash. The solution is to start in "safe mode", in the "Control Panel" - & gt; "System" - & gt; "Device Management The "Device Management" section of the program is a good place to make adjustments to your device.
★"Inferior parts": a few unscrupulous businessmen in the assembly of the machine to the customer, the use of low-quality boards and cards, memory, and some even sell counterfeit motherboards and polished CPU, memory sticks, so that the machine is very unstable in the operation of the machine, the occurrence of a crash is inevitable. Therefore, users should be vigilant when purchasing machines.
※ software reasons:
★Virus infection: the virus can make the computer work sharply reduced efficiency, resulting in frequent crash. This type of failure can be run through the antivirus software to carry out a comprehensive check, anti-virus, and should be upgraded in a timely manner antivirus software.
★CMOS improper settings: hard disk parameter settings, mode settings, memory parameters are set improperly, resulting in the computer can not start.
★Mistaken deletion of system files: As Windows9X startup requires Command.com, Io.sys, Msdos.sys and other files, if these files are damaged or mistakenly deleted, even if the various hardware settings are correct in the CMOS will not help. At this point, you need to use the system disk to reboot the system and then re-transmit the system files.
★Initialization files are corrupted: As Windows 9X starts up, it needs to read System.ini, Win.ini, and registry files, and if there is a Config.sys, Autoexec.bat file, these two files will also be read. Whenever there is an error message in any of these files there may be a crash, especially important are the four files System.ini, Win.ini, User.dat, System.dat.
★Dynamic Link Library (DLL) lost: In the Windows operating system, there is a class of files is also quite important, this is the extension of the DLL dynamic link library files, these files from the nature of the nature of belonging to the class of *** enjoyment files. If an application program is deleted with a *** enjoyment file, especially the more important core link file is deleted, the system will be dead or even crash.
★The remaining space on the hard drive is too little or too much debris:, as some applications require a lot of memory to run, disk space is needed to provide virtual memory, if the remaining space on the hard drive is too little to meet the needs of the software operation, it is easy to cause a crash. The solution to this problem is to divide the disk space properly, use a "disk defragmentation program" to defragment the hard disk regularly, and remove the junk files from the hard disk.
★Inadequate software upgrades: During the software upgrade process, some components of the software will be upgraded, but other programs may not support the upgraded components, resulting in a variety of problems.
★Misuse of beta software: Beta software usually has some bugs or is not stable enough in some aspects, and after using it, you will lose data in the program error message, crash or cause the system to fail to start.
★Illegal uninstallation of software: If you do not uninstall the software through the software, and directly delete the software installation directory, you will not be able to clear the registry and Windows directory of the corresponding link files, resulting in the system becomes unstable and cause crash. It is recommended that you use the uninstaller provided by the software to remove unwanted applications, and preferably run "Add/Remove Programs" in the "Control Panel" to completely remove the software from the system.
★Using pirated software: Pirated software may contain viruses that can automatically modify the system and cause it to crash during operation.
★Starting too many programs: As a result of running too many programs, the system resources are strained, and the data required by individual programs cannot be found in the memory or virtual memory, and abnormal errors will also occur.
★Illegal operation: Illegally opening or releasing the program in question with an illegal format or parameter can also cause the computer to crash.
★Non-normal shutdown of the computer: Do not directly use the chassis power button to force a shutdown, which is prone to system file damage or loss, causing automatic startup or runtime crash. For Windows 98/2000/NT and other systems, this is very important, if serious, will cause the system to crash. ★ Memory conflict: Sometimes running a variety of software are normal, but suddenly and inexplicably crash, restart running these applications and very normal, this is a false crash phenomenon. The reason for this is that Win98's memory resources are in conflict.
Hardware reasons for crash
Bad cooling
Monitor, power supply and CPU in the work of heat is very large, so it is very important to maintain good ventilation, if the monitor is too hot will lead to color, image distortion and even shorten the life of the monitor. The working time is also too long to cause the power supply to dissipate heat and cause the computer to crash. CPU cooling is an important issue related to the stability of the computer operation, but also the cooling failure of the "hardest hit".
Moving improperly
Computer in the process of moving if by a lot of vibration will often make the machine internal device loose, which leads to poor contact, caused by the computer crash, so move the computer should be avoided violent vibration.
Dust kills the machine
Too much dust inside the machine can also cause computer failure. If the floppy drive head or optical drive laser head is contaminated with too much dust, it can lead to read and write errors, and in severe cases, cause the computer to crash.
Equipment mismatch
If the motherboard frequency and CPU frequency mismatch, the old motherboard overclocking will be too high external frequency, may not be able to ensure the stability of the operation, and thus lead to frequent crash.
Software and hardware incompatibility
Three-dimensional software and some special software, some computers may not be able to start or even install, which may have hardware and software compatibility issues.
Memory Stick Failure
Mainly due to loose memory stick, soldering or poor quality of the memory chip itself. The memory stick contact failure should be ruled out according to the specific situation. If there is a problem with the quality of the memory stick, you need to replace the memory to solve the problem.
Hard disk failure
Mainly hard disk aging or due to improper use of bad sectors, bad sectors, so that the machine in the operation of the machine is very easy to crash. You can use special tools and software to troubleshoot, and if the damage is severe, you can only replace the hard disk. In addition, for motherboards that do not support UDMA66/100, attention should be paid to the setting of the hard disk operation mode in CMOS.
CPU overclocking
Overclocking increases the operating frequency of the CPU, but may also make its performance unstable. The reason for this is that the CPU's ability to access data in memory is already faster than the speed at which data is exchanged between the memory and the hard disk, and overclocking makes this conflict even more pronounced, exacerbating the problem of not being able to find the data you need in memory or virtual memory, which can result in an "exception error". The solution, of course, is simple: return the CPU to its normal frequency.
Hardware resource conflicts
An exception error can also be caused by conflicting settings on a sound or graphics card. In addition, conflicting interrupts, DMAs, or ports on other devices can cause a few driver exceptions to crash. The solution is to start in "Safe Mode" and make appropriate adjustments in "Control Panel" → "System" → "Device Management". The solution is to start in "Safe Mode" and make appropriate adjustments in "Control Panel" → "System" → "Device Management". For abnormal errors in the driver, you can modify the registry. Select "Run", type "REGEDIT", enter the registry editor, through the menu under the "Find" function, find and delete all the "primary key" related to the driver prefix string. The driver's prefix string will be deleted from all "primary keys" and "keys" in the registry, and the system will reboot.
Insufficient memory
The larger the memory capacity, the better, it should be no less than 0.5-1% of the capacity of the hard disk, if there is a problem in this regard, you should replace the memory stick with the largest possible capacity.
Shoddy parts
A few unscrupulous businessmen in the assembly of compatible customers, the use of low-quality boards and cards, memory, and some even sell counterfeit motherboards and Remarks over the CPU, memory, so the machine is very unstable in operation, the crash is inevitable. Therefore, the user should be vigilant when purchasing a machine, and can use some of the newer tools and software to test the computer, a long time to continuously test the machine (such as 72 hours), as well as to strive for as long as possible warranty time, etc..
Software reasons for the crash
Virus infections
Viruses can cause a sharp drop in computer efficiency, resulting in frequent crashes. At this time, we need to use antivirus software such as KV3000, Kingsoft, Rising Star, etc. to carry out a comprehensive check, anti-virus, and to do regular upgrading of antivirus software.
CMOS set improper
The failure phenomenon is very common, such as hard disk parameter settings, mode settings, memory parameters are set improperly, resulting in the computer can not start. For example, if the memory without ECC function is set to have ECC function, this will cause the computer to crash due to memory error.
Mistaken deletion of system files
Because Windows 9x startup requires Command.com, Io.sys, Msdos.sys and other files, if these files are damaged or mistakenly deleted, even if the hardware settings are correct in CMOS, it will not help. The solution: Start the computer with a boot disk of the same version of the operating system, then type "SYSC:" to retransmit the system files.
Initialization files are corrupted
Since Windows 9x startup requires reading System.ini, Win.ini, and registry files, the Config.sys and Au?toexec.bat files will also be read if they exist. Anytime there is an error message in any of these files a crash can occur, especially important are the four files System.ini, Win.ini, User.dat, Sys?tem.dat.
Dynamic Link Library (DLL) files lost
In the Windows operating system there is a class of files is also quite important, this is the extension of the name DLL dynamic link library files, these files from the nature of the nature of belonging to the *** enjoyment of the class of files, that is to say, a DLL file may have more than one piece of software in the runtime need to call it. If we delete an application software, the software's anti-installation program will record the files it has installed and ready to delete them one by one, it is easy to be deleted dynamic link library file at the same time will also be used by other software situations, if the missing link library file is more important core link file, then the system will crash, or even crash. We can use tools such as "Super Rabbit" and "Optimizer" to delete useless DLL files, so as to avoid accidental deletion.
The remaining space on the hard drive is too small or too fragmented
If the remaining space on the hard drive is too small, because some applications require a lot of memory to run, then you need virtual memory, and virtual memory is provided by the hard drive, so the hard drive has to have enough remaining space to meet the needs of the virtual memory. The newest addition to the system is a new, more compact design that will allow the user to easily access and control the system's functions and functions.
Failed BIOS upgrades
The BIOS should be backed up in case of an emergency, but if your system requires a BIOS upgrade, it's a good idea to make sure you're using the right version of the BIOS for your PC before you do so. If the BIOS is not upgraded correctly or if there is an unexpected power failure during the upgrade process, then your system may not boot. So make sure you know the BIOS model number before upgrading the BIOS. If the BIOS upgrade utility you are using can make a backup of the current BIOS, then make a copy of the previous BIOS on a disk. Also see if your system supports BIOS recovery and know how to do it.
Improper software upgrades
Most people think that software upgrades are a no-brainer, but the fact is that some of the ****ed components are upgraded during the upgrade process, and other programs may not support the upgraded components, leading to a variety of problems.
Misuse of beta software
It is better to use the beta version of the software sparingly, because the beta software usually comes with some bugs or is not stable enough in some aspects, and after using it, you will have the problem of program error with loss of data, crashing, or the system can't be booted up, and so on.
Illegal uninstallation of software
Don't delete the directory where the software is installed, if you do, there will be a lot of garbage in the registry and the Win?dows directory, and over time, the system will become unstable and cause crashes.
Using pirated software
Because these programs may hide viruses that, once executed, will automatically modify your system and cause it to crash during operation.
Defective application software
This situation is common, such as running 16-bit applications in Win98 that work well in DOS or Windows 3.1. Win98 is 32-bit, and despite its claims of compatibility, there are many places where it is not possible to harmonize with 16-bit applications. There are also cases where a peripheral driver that works fine under Win98 may have problems when the operating system is upgraded, causing the system to crash or not boot properly. In this case you should find a new version of the peripheral driver.
Too many programs are started
This exhausts system resources so that data needed by individual programs cannot be found in memory or virtual memory, and abnormal errors can also occur.
Illegal operation
Illegally opening or releasing the program in question with an illegal format or parameters can also cause the computer to crash. Please be careful to keep the correct format and related parameters in mind and not to open and release unfamiliar programs at will.
Irregular shutdown of the computer
Do not use the power button in the chassis directly, as it may cause damage or loss of system files, resulting in automatic startup or crash during operation. This is very important for systems such as Windows 98/2000/NT, which can cause a system crash in severe cases.
Conflicts in memory
Sometimes running a variety of software is normal, but suddenly and inexplicably crash, and after restarting to run these applications is very normal, this is a fake crash phenomenon. The reason for this is the conflict of memory resources. As you know, the application software is running in memory, and close the application software to release memory space. But some applications due to design reasons, even after the closure of the memory can not be completely released, when the next software needs to use this piece of memory address, there will be a conflict
Answer: AYXTJJSCJ - trainee magician Level 3 8-28 09:13
with the configuration does not matter, the C266 63 Memory 4G hard disk integrated graphics card is not necessarily dead! The first thing you need to do is to get a good deal on the computer, and then you'll be able to get a good deal on the hardware. To be more specific, what do you do to die, or just turn on the computer and die? Pay attention to whether the CPU fan is normal.
Respondent: kfrkfrkfr - Assistant Third Grade 8-28 09:14
However
a little low,
There are many reasons for the crash!
Online excerpts of a piece of
Brain crash causes, and prevention of computer crash tips!
1, computer crash causes?
2, how to prevent computer crash?
(1) First of all, the cause of computer crash!
Unable to start the system, the screen "freeze" unresponsive, the mouse, the keyboard can not be input, the software running abnormal interruptions and so on. Although the cause of the cause of the crash is multi-faceted, but the same thing, the cause of its hardware and software can never be detached from the two aspects.
Hardware causes by the crash
Bad cooling monitor, power supply and CPU in the work of heat is very large, so it is very important to maintain good ventilation, if the monitor overheating will lead to color, image distortion and even shorten the life of the monitor. If you work for too long, you will be able to use the power supply or monitor to dissipate the heat and cause the computer to crash. CPU cooling is an important issue that relates to the stability of computer operation, and it is also the "hardest hit" area for cooling failures.
Moving improperly in the process of moving the computer by a lot of vibration will often make the machine internal device loose, resulting in poor contact, causing the computer to crash, so the computer should be avoided when moving violent vibration.
Dust killers Excessive dust in the machine can also cause computer failure. If the floppy drive head or optical drive laser head is contaminated with too much dust, it will lead to read and write errors, and seriously cause the computer to crash.
Equipment mismatch If the motherboard frequency and CPU frequency mismatch, the old motherboard overclocking will be too high external frequency, may not be able to ensure the stability of the operation, thus leading to frequent crash.
Hardware and software incompatibility Three-dimensional software and some special software may not be able to start or even install properly on some microcomputers, which may have hardware and software compatibility problems.
Memory Stick Failure Mainly due to loose memory sticks, soldering or the quality of the memory chips themselves. The memory stick contact failure should be ruled out according to the specific situation, and if there is a problem with the quality of the memory stick, you need to replace the memory in order to solve the problem.
Hard disk failure is mainly due to hard disk aging or due to improper use of bad sectors, bad sectors. So that the machine is very easy to crash when running. You can use special tools and software to troubleshoot the problem, such as serious damage can only replace the hard disk. In addition, for motherboards that do not support UDMA 66/100, you should pay attention to the setting of the hard disk operation mode in CMOS.
CPU overclocking Overclocking increases the operating frequency of the CPU, but at the same time, it may also cause its performance to become unstable. The reason for this is that the CPU's ability to access data in memory is already faster than the speed at which the memory exchanges data with the hard disk, and overclocking makes this contradiction even more pronounced, exacerbating the problem of not being able to find the data you need in memory or virtual memory, which can lead to "abnormal errors". The solution, of course, is to return the CPU to its normal frequency.
Memory stick failures are mainly caused by loose memory sticks, soldering or the quality of the memory chips themselves. You should rule out memory stick contact failures on a case-by-case basis, and if there is a problem with the quality of the memory stick, you will need to replace the memory to solve the problem.
Hard disk failure is mainly due to hard disk aging or due to improper use of bad sectors, bad sectors. So that the machine is very easy to crash when running. You can use special tools and software to troubleshoot the problem, such as serious damage can only replace the hard disk. In addition, for motherboards that do not support UDMA 66/100, you should pay attention to the setting of the hard disk operation mode in CMOS.
CPU overclocking Overclocking increases the operating frequency of the CPU, while at the same time, it can make its performance unstable. The reason for this is that the CPU's ability to access data in memory is already faster than the speed at which data is exchanged between the memory and the hard disk, and overclocking makes this contradiction even more pronounced, exacerbating the problem of not being able to find the data you need in memory or virtual memory, which can lead to an "exception error". The solution, of course, is simple: return the CPU to its normal frequency.
Hardware resource conflicts are caused by conflicting settings on the sound or graphics card, resulting in an exception error. In addition, other devices with conflicting interrupts, DMAs, or ports may cause a few drivers to generate an exception, resulting in a crash. The solution is to boot in "Safe Mode" and make appropriate adjustments in "Control Panel" → "System" → "Device Management". The solution is to start in "Safe Mode" and make appropriate adjustments in "Control Panel" → "System" → "Device Management". For abnormal errors in the driver, you can modify the registry. Select "Run", type "REGEDIT", enter the registry editor, through the menu under the "Find" function, find and delete all the "primary key" related to the driver prefix string. The driver's prefix string will be deleted from all "primary keys" and "keys" in the registry, and the system will reboot.
Insufficient memory capacity The larger the memory capacity, the better, it should be no less than 0.5-1% of the hard disk's capacity, and if there is a problem in this regard, you should replace the memory stick with one that has as much capacity as possible.
Shoddy parts A few unscrupulous businessmen in the assembly of compatible machines to customers, the use of poor quality boards, memory, and some even sell counterfeit motherboards and Remarks over the CPU, memory, such a machine in the operation of the very unstable, the occurrence of computer crash is inevitable. Therefore, the user should be vigilant when purchasing a machine, and can use some of the newer tools and software to test the computer, a long time continuously test machine (such as 72 hours), as well as to strive for as long as possible warranty time, etc..
Deadline caused by software
Virus infection Viruses can cause a sharp drop in computer efficiency, resulting in frequent deadlines. At this time, we need to use antivirus software such as KV300, Kingsoft, Rising Star, etc. to carry out a comprehensive check, kill the virus, and to do regular upgrading of antivirus software.
Inadequate CMOS settings The phenomenon of this failure is very common, such as hard disk parameter settings, mode settings, memory parameters are set improperly, resulting in the computer can not start. For example, if you set the memory without ECC function to have ECC function, it will cause the computer to crash due to memory error.
Mistaken deletion of system files As Windows 9x startup requires Command.com, Io.sys, Msdos.sys and other files, if these files are corrupted or mistakenly deleted, even if the hardware settings are correct in CMOS, it will not help. The solution: Start the computer with a boot disk of the same version of the operating system, then type "SYS C:" to retransmit the system files.
Initialization files are corrupted Because Windows 9x boot needs to read System.ini, Win.ini, and registry files, if Config.sys and Autoexec.bat files exist, these two files will also be read. A crash can occur whenever there is an error message in any of these files, especially important are the four files System.ini, Win.ini, User.dat, System.dat.
Responders: old demon really fine - Vice President XI 10-8 14:56
--------------------------------------------------------------------------------
Computer crash Causes, and tips to prevent computer crashes!
1, computer crash causes?
2, how to prevent computer crash?
(1) First of all, the cause of computer crash!
Can not start the system, the screen "freeze" no response, the mouse, the keyboard can not be input, the software running abnormal interruptions and so on. Although the cause of the cause of the crash is multi-faceted, but the same thing, the cause of its hardware and software can never be detached from the two aspects.
Hardware causes by the crash
Bad cooling monitor, power supply and CPU in the work of heat is very large, so it is very important to maintain good ventilation, if the monitor overheating will lead to color, image distortion and even shorten the life of the monitor. If you work for too long, you will be able to use the power supply or the monitor to dissipate the heat and cause the computer to crash. CPU cooling is an important issue that relates to the stability of computer operation, and it is also the "hardest hit" area where cooling failures occur.
Moving improperly in the computer moving process by a lot of vibration will often make the machine internal device loose, resulting in poor contact, causing the computer to crash, so move the computer should be avoided violent vibration.
Dust killers Excessive dust in the machine can also cause computer failure. If the floppy drive head or optical drive laser head is contaminated with too much dust, it will lead to read and write errors, and seriously cause the computer to crash.
Equipment mismatch If the motherboard frequency and CPU frequency mismatch, the old motherboard overclocking will be too high external frequency, may not be able to ensure the stability of the operation, thus leading to frequent crash.
Hardware and software incompatibility Three-dimensional software and some special software may not be able to start or even install properly on some microcomputers, which may have hardware and software compatibility problems.
Memory Stick Failure Mainly due to loose memory sticks, soldering or the quality of the memory chips themselves. The memory stick contact failure should be ruled out according to the specific situation, and if there is a problem with the quality of the memory stick, you need to replace the memory in order to solve the problem.
Hard disk failure is mainly due to hard disk aging or due to improper use of bad sectors, bad sectors. So that the machine is very easy to crash when running. You can use special tools and software to troubleshoot the problem, such as serious damage can only replace the hard disk. In addition, for motherboards that do not support UDMA 66/100, you should pay attention to the setting of the hard disk operation mode in CMOS.
CPU overclocking Overclocking increases the operating frequency of the CPU, but at the same time, it may also cause its performance to become unstable. The reason for this is that the CPU's ability to access data in memory is already faster than the speed at which data is exchanged between the memory and the hard disk, and overclocking makes this contradiction even more pronounced, exacerbating the problem of not being able to find the data you need in memory or virtual memory, which can lead to an "exception error". The solution, of course, is to return the CPU to its normal frequency.
Memory stick failures are mainly caused by loose memory sticks, soldering or the quality of the memory chips themselves. You should rule out memory stick contact failures on a case-by-case basis, and if there is a problem with the quality of the memory stick, you will need to replace the memory to solve the problem.
Hard disk failure is mainly due to hard disk aging or due to improper use of bad sectors, bad sectors. So that the machine is very easy to crash when running. You can use special tools and software to troubleshoot the problem, such as serious damage can only replace the hard disk. In addition, for motherboards that do not support UDMA 66/100, you should pay attention to the setting of the hard disk operation mode in CMOS.
CPU overclocking Overclocking increases the operating frequency of the CPU, but at the same time, it may also cause its performance to become unstable. The reason for this is that the CPU's ability to access data in memory is already faster than the speed at which data is exchanged between the memory and the hard disk, and overclocking makes this contradiction even more pronounced, exacerbating the problem of not being able to find the data you need in memory or virtual memory, which can lead to an "exception error". The solution, of course, is simple: return the CPU to its normal frequency.
Hardware resource conflicts are caused by conflicting settings on the sound or graphics card, resulting in an exception error. In addition, conflicts with interrupts, DMAs, or ports on other devices may cause a few drivers to crash. The solution is to boot in "Safe Mode" and make appropriate adjustments in "Control Panel" → "System" → "Device Management". The solution is to start in "Safe Mode" and make appropriate adjustments in "Control Panel" → "System" → "Device Management". For abnormal errors in the driver, you can modify the registry. Select "Run", type "REGEDIT", enter the registry editor, through the menu under the "Find" function, find and delete all the "primary key" related to the driver prefix string. The driver's prefix string will be deleted from all "primary keys" and "keys" in the registry, and the system will reboot.
Insufficient memory capacity The larger the memory capacity, the better, it should be no less than 0.5-1% of the hard disk's capacity, and if there is a problem in this regard, you should replace the memory stick with one that has as much capacity as possible.
Shoddy parts A few unscrupulous businessmen in the assembly of compatible machines to customers, the use of poor quality boards, memory, and some even sell counterfeit motherboards and Remarks over the CPU, memory, such a machine in the operation of the very unstable, the occurrence of computer crash is inevitable. Therefore, the user should be vigilant when purchasing a machine, and can use some of the newer tools and software to test the computer, a long time continuously test machine (such as 72 hours), as well as to strive for as long as possible warranty time, etc..
Deadline caused by software
Virus infection Viruses can cause a sharp drop in computer efficiency, resulting in frequent deadlines. At this time, we need to use antivirus software such as KV300, Kingsoft, Rising Star, etc. to carry out a comprehensive check, kill the virus, and to do regular upgrading of antivirus software.
Inadequate CMOS settings The phenomenon of this failure is very common, such as hard disk parameter settings, mode settings, memory parameters are set improperly, resulting in the computer can not start. For example, if you set the memory without ECC function to have ECC function, it will cause the computer to crash due to memory error.
Mistaken deletion of system files As Windows 9x startup requires Command.com, Io.sys, Msdos.sys and other files, if these files are corrupted or mistakenly deleted, even if the hardware settings are correct in CMOS, it will not help. The solution: Start the computer with a boot disk of the same version of the operating system, then type "SYS C:" to retransmit the system files.
Initialization files are corrupted Because Windows 9x boot needs to read System.ini, Win.ini, and registry files, if Config.sys and Autoexec.bat files exist, these two files will also be read. Anytime there is an error message in these files there can be a crash, especially important are the four files System.ini, Win.ini, User.dat, System.dat.
Hands are almost broken owners ah plus points it!