Constant temperature and humidity test chamber installation notes:
1. Placement should be considered in the heat dissipation of equipment and easy to equipment inspection and maintenance.
2. The bottom of the machine is a refrigeration system, the heat is large, so when installed, the body and the wall and any other machine should be at least 60 centimeters away from each other to maintain ventilation.
3. The equipment should be placed on the ground level, well-ventilated room
4. Constant temperature and humidity test chamber to avoid direct sunlight, and maintain indoor air circulation.
5. The equipment should be placed in a separate space, and should not be placed in public places or near flammable, explosive, perishable chemicals and strong vibration, strong electromagnetic fields to avoid failure, fire and personal injury.
6. The power supply and drainage pipes should be shortened as much as possible.
7. Equipment should be avoided to be placed in dirty and dusty places, ambient temperature: 5 ℃ ~ +30 ℃ (average temperature within 24 hours ≤ 30 ℃), ambient humidity: ≤ 85% RH, the machine in this environment to obtain the best and most stable operation. Otherwise, it may lead to constant temperature and humidity test chamber cooling rate is slow or can not reach the low temperature requirements, and temperature and humidity control can not be very stable.
8. The top of the device shall not place any debris to avoid heavy objects falling caused by human injury and property damage.
9. Do not hold the power box, wire, motor as a driving force when handling, to prevent the power box electrical damage, loose or cause accidental failure.
10. The maximum inclination of the equipment should be below 30 ° angle, at the same time must be firm body in order to prevent the body from falling down, crushing damage or smashed human body and damaged property.
11. Positioning of the machine to be shifted again, the body of the four horizontal feet to recover and then shifted, and then adjust the balance, in order to avoid damage to the test equipment.
Each high-quality constant temperature and humidity test chamber has exquisite craftsmanship, mature and stable performance, sophisticated control, excellent service system.
Constant temperature and humidity test chamber used to detect the material in a variety of environmental performance equipment and test a variety of materials heat-resistant, cold-resistant, dry, humidity-resistant properties. Suitable for electronics, electrical appliances, cell phones, communications, instrumentation, vehicles, plastic products, metals, food, chemicals, building materials, medical, aerospace and other products for testing quality.
Conformity of constant temperature and humidity test chamber:
GB/T5170.5-2008, GB/T10586-2006, GB/T2423.3-2006
Conformity of constant temperature and humidity test chamber common models:
< p>LRHS-101-LHLRHS-225-LH
LRHS-504-LH
LRHS-800-LH
LRHS-1000-LH
.