Article 21 Mining, metal smelting, building construction, road transport units and the production, operation and storage of dangerous goods units, shall, in accordance with national laws and regulations, set up production safety management organizations, equipped with full-time production safety management personnel.
The production safety management organization of other production units other than those provided for in the preceding paragraph, the production safety management personnel set up, equipped with standards, formulated by the provincial government.
Article 22 The production and management units shall not reduce the wages and benefits of production safety management personnel to perform their duties in accordance with the law or terminate the labor contract with them. Full-time production safety management personnel shall not be treated less favorable than other managers of the same level and the same position, and enjoy the national and provincial provisions of the relevant treatment.
Production and management units can make outstanding contributions to the work in production safety units and individuals to reward.
Article 23 The main person in charge of production and production safety management personnel of the production and management units shall receive education and training on production safety, and have the appropriate knowledge of production safety and management capabilities.
Mining, metal smelting, building construction, road transport and the production, operation, storage, loading and unloading of dangerous goods units, the main person in charge and production safety management personnel, within six months from the date of appointment, shall be responsible for production safety supervision and management by the competent departments responsible for the production safety knowledge and management capacity of the qualified assessment. The examination shall not be charged.
Article 24 The production safety education and training of production units shall comply with the following provisions:
(a) Arrangements for special operators in accordance with the relevant provisions of the State for training, to obtain the appropriate qualifications, and certified to work;
(b) for new personnel, internships for the factory, workshop, group three-level education and training;
(c) for the use of new processes, new technologies, new technologies, new technologies, new technologies, new technologies and new technologies, new technologies and new technologies, new technologies, new technologies and new technologies. (C) the use of new processes, new technologies, new materials or the use of new equipment for specialized education and training;
(D) transfer or leave the post for more than six months of personnel for the workshop, team-level education and training, temporary transfer, job change for new positions in the education and training;
(E) with the external construction unit of the external construction personnel for special education and training;
(F) ) and labor dispatch units for labor dispatch personnel respectively, job safety operating procedures and skills education and training;
(VII) at least once a year the whole staff education and training.
Production and management units should be in accordance with the requirements of one person a file to establish production safety education and training files, factual records of education and training time, content, assessment results. Training and assessment results should be responsible for the assessment by the production and management units and practitioners to sign. Production safety education and training assessment failed, shall not be allowed to work.
Article 25 of the production and management units of new construction, alteration, expansion projects, safety facilities should be designed at the same time as the main project, the same time the construction, the same time into production and use, safety facilities should be included in the construction project budget estimates, and to meet the following requirements:
(a) the construction project design unit in the preparation of the project design documents should be prepared at the same time the preparation of the safety facilities design documents or in the design documents include safety facilities, safety facilities, safety facilities, safety facilities, safety facilities, safety facilities, safety facilities, safety facilities, safety facilities, and safety facilities. Documents or in the design documents contain safety facilities design content. Need to be reported to the competent authorities for approval of the construction project, safety facilities design documents should be approved along with the project design documents;
(b) construction project construction unit should be strictly in accordance with the review and approval of the safety facilities construction drawings and design requirements, shall not change the safety facilities design;
(c) in the commissioning stage of the production equipment, should be at the same time on the debugging of safety facilities, evaluation of its effectiveness, and the safety facilities design should be evaluated and the safety facilities should be evaluated. (C) in the commissioning stage of production equipment, should be commissioned at the same time on the safety facilities, to evaluate its effectiveness, and form a report.
Article 26 of the production and management units in accordance with the law will be production and management projects, premises and equipment contracted or leased to other units or individuals, the contracting and leasing units should be the relevant safety conditions and qualifications of the verification, do not have the safety conditions or the corresponding qualifications, shall not be contracted, leased.
Production and management units should be contracted, leased units or individuals of production safety work for unified coordination, management, regular safety inspections, and in special production safety management agreement or contract, lease contract, according to law, their respective production safety management responsibilities and production safety accident reporting, investigation and treatment, emergency rescue, economic compensation, accident risk money and other safety matters to make a clear agreement. Clearly agreed.
Article 27 The province to implement production safety liability insurance system. In mining, metal smelting, construction, transportation, hazardous chemicals, fireworks, explosives, fisheries production and other high-risk industry sectors mandatory implementation of production safety liability insurance; encourage and promote other production and management units to insure production safety liability insurance.
The insurance company to underwrite production safety liability insurance should be involved in the production of units of risk assessment and control, for the production of production safety liability insurance production units to provide prevention of production safety accidents, production safety publicity, education and training and other services, and to the provincial government supervision and management of production safety departments to inform the situation.
Production and management units should participate in work injury insurance in accordance with the law, and pay insurance premiums for employees. The work injury prevention fee extracted from the work injury insurance premiums shall be implemented in accordance with the relevant provisions of the state.
Chapter III Special Provisions on Work Safety in Key Industries
Article 28 The production and management units shall implement the management responsibility of monitoring and control of major sources of danger and take the following measures for major sources of danger:
(a) registration, filing and declaration;
(b) establishment of monitoring and control system of major sources of danger and regular maintenance. system and regular maintenance to maintain normal operation;
(C) regular inspection and testing of facilities and equipment;
(D) the development of emergency response plan for major sources of risk, and organize at least one drill every six months;
(E) regular safety assessment.
Production and management units should be significant sources of risk factors and emergency measures in a timely and truthful information to employees and relevant personnel, in a conspicuous position to set warning signs, and in accordance with relevant regulations will be significant sources of risk and their related safety measures, emergency plans reported to the supervision and management of production safety and relevant departments for the record.
Article 29 The production and management units should be easy to burn, easy to explode, poisoning, corrosion, asphyxiation, burns, high temperature, noise, dust, leakage, electrocution, tipping, impact, falling, falling objects, rolling, landslides, collapses, etc. There is a greater risk of hazardous factors of the import and export of the production and operation of the premises as well as the key parts and related facilities, equipment, set up a clear safety warning signs.
The production and management units should strengthen the safety management of special equipment and other hazardous equipment, prepare a catalog of equipment, strengthen the safety training and assessment of operators.
Article 30 of the mines, building construction units and hazardous chemicals, fireworks, civil explosives production units shall apply to the relevant departments for a production safety license. Not obtain a production safety license or other administrative production safety permit production and management units, shall not engage in the production and management activities.
No unit or individual shall not obtain a safety production license or other administrative safety production permit and illegally engaged in the production and operation of the production and operation of the unit to provide raw and auxiliary materials, production and operation of premises, transportation, storage, warehousing and other conditions.
Article 31 of the mining, metal smelting and construction projects for the production, storage, loading and unloading of dangerous goods, shall be in accordance with the relevant provisions of the state safety assessment.
Mining, metal smelting and construction projects for the production, storage, loading and unloading of dangerous goods, the design of safety facilities shall be submitted to the relevant departments for review, the review of the department and its personnel responsible for reviewing the results of the review is responsible for.
Article 32 of the mine, metal smelting construction projects and construction projects for the production, storage, loading and unloading of dangerous goods after completion, the trial operation shall be not less than thirty days, but not more than one hundred and eighty days. The state otherwise provided for from its provisions.
After the completion of the trial run of the project, the construction unit must be organized in accordance with relevant laws and regulations on the acceptance of safety facilities, and is responsible for the acceptance of the results; acceptance before being put into production or use. Construction projects may produce occupational disease hazards, the occupational disease protection facilities should be combined with safety facilities for evaluation, review and acceptance. Construction unit organization acceptance should be supervised by the supervision and management of production safety departments.
Article 33 Mining, metal smelting, building construction units, the production, operation, storage, use, transportation, loading and unloading of dangerous goods units and building materials, machinery processing, electricity, heating units and other production and operation units above the scale of the end of the shutdown, shutdown, shutdown, stopping construction, before resumption of production and operation, should be formulated to resume production work program and organization of the validation, according to the work program of production safety requirements for employees. Program of production safety requirements for employees to carry out special training, production safety inspection, inspection and qualified before resuming production.
Article 34 of the mines, metal smelting units and the production and storage of dangerous goods units, should be equipped with a certain percentage of registered safety engineers to engage in production safety management; encourage other production and management units to employ registered safety engineers to engage in production safety management.
Article 35 of the production and management units engaged in the following activities, should strictly implement the relevant safety standards and management specifications, the development of operational programs and emergency response plans, set up a safe area of the work site, the implementation of safety precautions, signed a special safety management agreement or in the contract to specify the safety of the production of the contract, found that the hidden dangers of accidents should be eliminated in a timely manner:
(a) set up outdoor advertising, plaques, electronic screens, etc.;
(b) the building's outdoor walls, glass curtain wall cosmetic cleaning, bricklaying, painting, air conditioning installation and other high-altitude operations;
(c) for sewage tanks (wells), septic tanks, sewers, blind manholes and other underground work in the confined space;
(d) flammable and explosive places of fire operations;
(E) blasting, lifting, near high-voltage transmission line operations, buildings and structures demolition, road clearance and rescue, large-scale overhaul and other operations.
Article 36 of the storage and stacking of dangerous goods in ports, terminals, warehouses or logistics centers and other places of design, construction should be in line with national design specifications and safety protection distance. Has a building does not meet the design specifications and safety protection distance, shall not be used for the storage and stacking of dangerous goods.
Storage and stacking of dangerous goods in ports, terminals, warehouses or logistics centers and other places should be set up safety warning signs, the name of the dangerous goods, types, quantities, as well as safety instructions, fire safety requirements and other precautions, and will be the name of the batch, the type of changes in quantity to report to the relevant departments. Dangerous goods transportation, loading and unloading operations, should be in the approved area within the scope of operations and strict compliance with safety regulations.
Article 37 of the production and operation units involved in flammable and explosive, toxic and hazardous dust, gas or other physical workplaces, should be set up in accordance with state regulations to monitor the alarm devices and remote monitoring systems, in accordance with relevant national explosion-proof standards set up buildings, structures, electrical equipment, static discharge and ventilation systems and other facilities, and in accordance with the provisions of the implementation of the following measures:
(a) maintain safe exits and emergency exits and emergency exits. ) to keep the safety exits and emergency evacuation routes unobstructed;
(b) control the number of explosive hazardous substances stored in the workplace;
(c) regular testing and maintenance of electrical equipment and ventilation dust, anti-static and other safety facilities in hazardous areas;
(d) regular cleanup of combustible dust.
Ammonia-related chlorine and other toxic and hazardous workplace production and management units should be in line with the provisions of the preceding paragraph, but also should be regularly inspected storage devices, in the storage and use of the area set up leakage collection and treatment devices and accidental drainage systems, in the operation of the job set up eyewash, drenching, equipped with air respirators, gas masks, as well as first aid medicines.
Article 38 stations, subway stations, piers, airports, dance halls, theaters, stadiums (halls), hotels, restaurants, shopping (city), tourist attractions, zoos, parks, amusement parks, cybercafes, bars and other places of business where the public gather should meet the following requirements:
(a) shall not be unauthorized changes to the main body of the premises building and load-bearing structure;
( (ii) the actual number of people shall not exceed the required capacity, set up clearly marked safety exits and evacuation channels in line with the evacuation requirements;
(iii) in accordance with the provisions of the emergency broadcasting and command system, emergency lighting facilities, fire-fighting equipment, the installation of security monitoring system, and to ensure that intact and effective;
(iv) the development of emergency rescue plan for production safety accidents, equipped with emergency rescue personnel, organize emergency rescue drills. Rescue personnel, emergency rescue drills;
(e) in accordance with state regulations on a regular basis on the elevator, boiler, passenger ropeways, large amusement rides, power distribution and other important facilities and equipment testing, inspection;
(f) the same place of business or other buildings by more than two units of the management and use of all parties should be clear about their safety responsibilities.
In the above places to hold large gatherings or activities, should fulfill the relevant approval procedures according to law, to develop a safe work program, the implementation of the security measures.
Article 39 The underground business premises should be equipped with emergency broadcasting and ventilation, fire prevention facilities and equipment, set up safety exits and emergency evacuation routes, marking the evacuation location and direction of evacuation, and regular inspection, maintenance, to ensure normal operation and use. Underground business premises prohibit the following acts:
(a) production, operation, storage, carrying dangerous chemicals, fireworks and other toxic and hazardous, flammable and explosive substances;
(b) crowded, blocking evacuation routes, vents, fire escapes;
(c) the use of liquefied petroleum gas and gasoline, kerosene, methanol, ethanol and other flammable liquids as fuel;
(D) illegal installation, use of electrical products and laying of electrical wiring;
(E) removal, damage to various types of safety facilities and equipment.
Article 40 Schools, kindergartens, research institutes, medical institutions, nursing homes should strengthen the fire, electricity, civil gas, practical (test) test drugs, practical (test) test room, oxygen station, dormitories, wards, office buildings, building (renovation) construction, transportation, as well as outdoor teaching, group activities, etc., to carry out regular safety inspections to eliminate potential accidents, develop and improve the emergency rescue plan, and and improve the emergency rescue plan, and organize emergency drills at least twice a year.
Schools, kindergartens, research institutes, medical institutions, and nursing homes are not permitted to rent out premises for the production, operation, storage, loading and unloading of dangerous goods.
Schools, research institutes, medical institutions and other self-managed factories, companies, shopping malls (stores), hotels, restaurants and rental or contracting sites, street stores, canteens, supermarkets, construction projects, as well as other production and management activities, in accordance with the production and management of the unit for supervision and management.
Article 41 The property service enterprises shall operate within the scope of the service area of the flow of arteries, fire escapes, underground garages, manholes, septic tanks, elevators and other key areas as well as plumbing, gas, power supply and other important facilities for daily inspection of the inspection of the hidden dangers of accidents found in the inspection shall be dealt with immediately, and issue a warning. The existence of major hidden accidents, but also should be promptly reported to the local street office or township (township) government and departments responsible for the supervision and management of production safety.
Property service enterprises should be in the operating range of the service area of the service users to carry out safety publicity, organization of emergency drills.
Chapter IV Workers' rights and obligations in production safety
Article 42 The employees of the production and management units have the following rights:
(a) to understand the workplace and the workplace of the existence of hazardous factors, precautionary measures, and emergency response to accidents;
(b) to the work of production safety to put forward suggestions, criticism of the existence of problems. Suggestions on the work of safety, the existence of problems put forward criticism, denunciation, accusation;
(C) refused to violate the rules and command and forced risky operation;
(D) found that directly endangering the safety of the person in an emergency situation, have the right to stop the operation or to take possible emergency measures to evacuate the workplace;
(E) access to and the use of labor protection equipment that meets the national standards or industry standards;
(E) to obtain and use of labor Protective equipment;
(f) In addition to enjoying the right to work injury insurance in accordance with the law, if there is still the right to obtain compensation in accordance with the relevant civil laws, the right to claim compensation from the organization for damages suffered as a result of a work safety accident.
The production and management unit shall not reduce the wages, benefits and other benefits or terminate the labor contract with the employees because of the second, third and fourth items of the preceding paragraph.
Article 43 The production and management units shall provide employees with labor protective equipment in accordance with national standards or industry standards, and supervise and educate employees to wear and use in accordance with the provisions. No money or other items shall be used to replace labor protective equipment.
Article 44 The production and operation units and employees to enter into labor contracts, should be set out to protect the employees labor safety, prevention of occupational hazards, as well as for employees to handle work-related injuries insurance matters according to law.
Production and management units shall not in any form with the workers to reduce or exempt its workers due to production safety accidents and injuries in accordance with the law shall be responsible for the agreement.
Article 45 The employees of the production and management units shall fulfill the following obligations:
(a) to abide by the rules and regulations on work safety and operating procedures of the unit, and to obey the management;
(b) to correctly wear and use the labor protective equipment, and to carry out the post safety inspection before going to work;
(c) to accept the education and training on work safety and master the work safety requirements for their own work;
(c) to receive work safety education and training, and to master the work safety requirements for their own work. Production safety knowledge required for their jobs, improve production safety skills, and enhance accident prevention and emergency response capabilities;
(d) found hidden accidents or other unsafe factors, immediately report to the production safety management personnel or the person in charge of the unit;
(e) in the event of emergency evacuation of production safety accidents, to obey the unified command of the scene;
(f) After the occurrence of production safety accidents, cooperate with the accident investigation, truthfully provide relevant information.
Article 46 The trade unions have the right to supervise and give opinions on the simultaneous design, construction, operation and use of safety facilities in construction projects.
The trade unions of the production and management units in violation of the laws and regulations on production safety, infringement of the legitimate rights and interests of employees, the right to demand rectification; found that the production and management units in violation of the rules and regulations of the command, forced risky operation or found that the hidden dangers of accidents, the right to put forward proposals to solve the problem, the production and management units should be timely study the reply; found that the situation of life and safety of employees, the right to the production and management units recommended to organize the evacuation of hazardous places. The production and management units should immediately deal with the situation.
Trade unions have the right to participate in the investigation of accidents according to the law, to the relevant departments to put forward processing advice, and demand that the responsibility of the people concerned.
Chapter V Supervision and Administration of Work Safety
Article 47 The government at or above the county level shall report annually to the people's congress at this level or its standing committee on the situation of work safety, accept supervision in accordance with the law, and make it public.
The standing committees of the people's congresses at or above the county level shall adopt such methods as law enforcement inspections, inquiries, interrogations, and inspections by representatives to strengthen the supervision of work safety.
Article 48 The province establishes a production safety responsibility system covering the provincial, municipal, county, township and village levels, strengthens the standardization of supervision and management of production safety in accordance with the division of responsibilities, and implements the grid-based management of production safety.
Township (township) government, street offices should be clearly responsible for the supervision and management of production safety institutions, various types of development (park) should be set up specifically responsible for the supervision and management of production safety institutions, equipped to meet the needs of the work of the supervisory staff, to provide the work of the necessary facilities, equipment and financial security.
Village (neighborhood) should guide the production units to set up production safety mutual investigation of self-regulatory organizations, clear production safety information officer, on the discovery of major safety hazards, illegal production and operation of clues, should be reported to the local government or the relevant departments to cooperate with the government and its departments at all levels to carry out their work.
Article 49 The governments at all levels shall establish and improve the production safety leadership responsibility system, production safety inspections, accountability for production safety accidents and warning interviews and other systems, scientific production safety assessment indicators, to strengthen the relevant departments of the government at this level and the lower level of government production safety assessment, the implementation of the process of the assessment and the results of the assessment of the combination of the assessment and to increase the weight of its comprehensive assessment of the government and the relevant departments of the assessment. The government has also set up the safety production assessment indexes.
The main person in charge of the government and its relevant departments at all levels of the administrative region or the supervision and management of the department in the field of production safety is responsible for the overall leadership; the person in charge of the integrated supervision of the leadership responsibility; other responsible persons in charge of the scope of work within the safety of the production safety of the direct leadership responsibility.
The main person in charge of the government above the county level should be signed with the relevant departments and the main person in charge of the government at lower levels of production safety responsibility.
Article 50 The governments at all levels shall convene at least once a quarter to prevent major and major production safety accidents, study the work of production safety in the administrative region, inform the work of production safety, coordination and resolution of major problems in the work of production safety.
The production safety supervision and management departments of the governments above the county level find that the hidden dangers of accidents and unsafe matters should be dealt with by other departments responsible for production safety supervision and management, they should put forward corrective or treatment opinions. Other departments with production safety supervision and management responsibilities should be corrected or dealt with in a timely manner, and feedback to the supervision and management of production safety.
Article 51 The government at or above the county level and its departments responsible for production safety supervision and management shall establish and improve the management of major accidents and hidden dangers supervisory system, clear supervision of the content, process, time limit for rectification and supervision of ineffective into the scope of the government to verify the accountability of the seriousness of the situation in accordance with the rules and regulations of the responsibility of the relevant personnel, and through the website and other media announcements, accept social supervision.
Article 52 The government at or above the county level shall formulate production safety supervision and monitoring capacity building plan to improve supervision and management of law enforcement institutionalization, standardization, information technology.
Governments at or above the county level shall strengthen the production safety law enforcement protection, improve the investigation and evidence collection and other law enforcement equipment, to ensure that grass-roots supervision and inspection and emergency rescue vehicles to meet the needs of the work. Supervision and inspection of vehicles is difficult to guarantee, according to the provisions of the state and the province through socialization, market-oriented way to solve.
Production safety supervision and inspection personnel to enter the production and management of dangerous places for inspection, personal protective equipment and inspection, forensics and other equipment should meet the safety requirements. Does not meet the safety requirements, shall not enter the dangerous places for inspection.
Article 53 The government at or above the county level and its departments with responsibility for production safety supervision and management shall promote the production and operation of production safety standardization standardization of the creation of work, strengthen the production and operation of safety standardization grading assessment and evaluation of the standardization of the operation of the quality of the standardization and the effect of assessment and supervision.
Article 54 The departments of the government above the county level that are responsible for the supervision and management of production safety shall formulate a plan for the supervision and inspection of production safety of production units, and make timely adjustments and improvements according to the actual situation of production safety, and report to the government at the same level for approval and implementation.
Production safety supervision and inspection personnel in the production unit to enter the production supervision and inspection of production safety, should clearly record the time, place, parts of the inspection. Production safety violations and hidden accidents found during the inspection should be dealt with according to law.
The inspected unit shall cooperate, shall not refuse, obstruct the inspection, shall not refuse to receive, refuse to implement the supervision and monitoring instructions.
Article 55 The departments in charge of education of governments at or above the county level shall incorporate the popularization of safety knowledge into national education, establish and improve the system of safety education in primary and secondary schools and occupational safety education in high-risk industries, and strictly implement the content of safety education in kindergartens, primary and secondary schools, vocational colleges and universities, and in the activities of social practice in classroom teaching and promotion of various types of schools to carry out at least one lecture on safety topics every semester. The company is also encouraging higher education institutions to incorporate safety education into their elective programs.
Governments above the county level should gradually set up safety education practice bases, innovative forms of safety education.
The relevant departments and units should be included in the content of safety education in the national education and training programs for public officials.
Article 56 The government at or above the county level shall establish and improve the safety risk assessment and demonstration mechanism, scientific and reasonable to determine the location of production and operation units and infrastructure construction, the spatial layout of residential areas, the construction of major sources of danger information management system, key industries, key areas, key enterprises to implement the risk of early warning control. For the location of neighboring, similar industry, industry similar regions and industries, to establish and improve the major security risk joint prevention and control mechanism.
The competent departments of urban and rural planning of the government above the county level and other relevant departments shall not approve the new construction, alteration and expansion of the production and storage of dangerous goods in densely populated areas of towns and cities, factories, warehouses; shall not be approved to establish a slag heap, tailing ponds, etc. within the scope of the area does not meet the requirements of the safety distance; has been built does not meet the safety requirements of the above projects, should be taken to take control measures, to eliminate the hidden dangers of accidents.
In the major sources of danger, railroads, highways, high-voltage transmission lines and pipelines for the transmission of dangerous goods, etc. within the safety distance, shall not be approved for the construction of buildings, structures; has been built does not meet the safety distance requirements of the buildings, structures, should be demolished according to law, or to take other safety measures.
Article 57 The government above the county level project investment management departments and departments responsible for the supervision and management of production safety should strengthen the project approval, licensing and other aspects of management, the approval of high-risk industry construction projects should be the safety of production as a precondition. The establishment of a joint mechanism for safety supervision, regular major construction projects, mining, metal smelting and for the production, storage, loading and unloading of dangerous goods and other high-risk industry construction projects and industrial construction projects concentrated in the development (park) area for joint supervision and inspection, according to the law to investigate and deal with the project and the construction of construction in the presence of illegal or unlawful acts.
Article 58 The government at or above the county level shall incorporate production safety professional and technical services into the modern service industry development planning, the establishment of the government to purchase production safety services system, support the development of production safety professional industry organizations.
The relevant production safety associations and intermediary service institutions shall strengthen industry self-discipline and internal management, in accordance with the laws, regulations and statutes, to provide production safety services for the production and management units, and accept the guidance and supervision of the relevant departments.
Production and management units entrusted to the organizations specified in the preceding paragraph to provide production safety technology, management services, to ensure that the responsibility for production safety is still the responsibility of the unit.
Undertake safety evaluation, certification, testing, inspection organizations should have the qualifications required by the state. The relevant organizations should be responsible for the results of the `safety evaluation, assessment, certification, testing, inspection and so on.
Article 59 of the departments responsible for the supervision and management of production safety in accordance with the law on the existence of major accidents hidden danger of production and management units to make the decision to suspend production and business, stop construction, stop using the relevant facilities or equipment, the production and management units shall be carried out in accordance with the law, and timely elimination of the hidden danger of accidents.
The production and management units refuse to implement, there is a real danger of production safety accidents, under the premise of ensuring safety, by the department responsible for production safety supervision and management of the approval of the main person in charge, you can take written notice of the relevant units of the production and management units related to the premises, equipment, facilities, independent units, sites to stop the power supply, stop the supply of civil explosives, and other measures to force the production and management units to fulfill the decision. Operating units to fulfill the decision. In addition to emergency situations that jeopardize production safety, stopping power supply measures twenty-four hours in advance to inform the production and management units.
Production and management units to fulfill the administrative decisions according to law, take corresponding measures to eliminate potential accidents, production safety supervision and management responsibilities of the department shall promptly lift the measures provided for in the preceding paragraph.
Article 60 The government at or above the county level shall establish a system of convergence between administrative law enforcement and criminal justice. Departments responsible for production safety supervision and management shall strengthen coordination with the people's court, the people's procuratorate, the public security organs, notify the situation related to production safety, and study issues related to responsibility in the field of production safety.
Article 61 The government at or above the county level shall incorporate the construction of the production safety integrity system of production units into the social credit system, the production safety integrity of production units to implement hierarchical management. Serious violations of the production and management units and their responsible persons, should be reduced in its integrity level or included in the list of bad faith and announced to the public, and notify the competent authorities of the industry, the competent authorities in charge of investment, the competent authorities of land and resources, securities supervision and management institutions and relevant financial institutions, etc., included in the list of bad faith of the units and individuals engaged in production and management activities shall be restricted or prohibited according to law.
The production and management units and their responsible persons can apply to the government at or above the county level for a review if they have any objections to the integrity level or being included in the list of bad faith. Fulfillment of the relevant obligations or correction of illegal behavior, confirmed by the government at or above the county level, should be removed from the list of bad faith and re-assessment of integrity rating.
Article 62 The government at or above the county level is responsible for the supervision and management of production safety departments shall publish the report telephone, e-mail, etc., the establishment of production safety line and the social public **** management platform for the unified reporting, classification and disposal of reporting mechanism, to facilitate citizens, legal persons and other organizations to report.
The department receiving the report should be handled in a timely manner, and should be confidential to the informant's relevant information, to safeguard the legitimate rights and interests of whistleblowers.