(1) qualification classification (qualification standard)
The qualification of engineering quality testing institutions is divided into comprehensive qualification and special qualification.
The qualification standards for testing institutions shall be formulated separately by the competent department of housing and urban construction in the State Council.
Comprehensive class refers to the testing institutions with the testing ability generally required in the acceptance standards for construction quality of construction projects such as conventional materials and common structural types. Special category refers to testing institutions with some special abilities other than comprehensive testing institutions.
(2) Grade standard
There is no specific hierarchical management method in the new management method, so we refer to the old method for the time being.
Comprehensive qualification is divided into three grades: A, B and C according to personnel, environment, years of establishment, detection ability and risks that can be taken. Special qualifications are not graded.
1. Comprehensive Grade A must meet the basic requirements in Table 1- 1, the necessary detection capabilities in Table 1-2 and the detection capabilities in at least five categories in Table 1-3.
2. Comprehensive Grade B must meet the basic detection ability in table 1- 1, the necessary detection ability in table 1-2 and at least three types of detection ability in table 1-3.
3. Comprehensive Grade C must meet the basic requirements of Table 1- 1 and the necessary detection ability of Table 1-2.
4. Special testing institutions must meet the basic requirements of 2- 1 and the necessary testing capabilities in Table 2-2.
5. See Annex 1 for the main instruments and equipment required for testing capability.
Second, the qualification application, license and change
(a) the competent departments of housing and urban construction of the people's governments of provinces, autonomous regions and municipalities directly under the Central Government shall be responsible for the qualification licensing of testing institutions within their respective administrative areas.
A testing institution applying for testing qualification shall have the qualification of an independent legal person and apply to the competent department of housing and urban construction of the people's government of the province, autonomous region or municipality directly under the Central Government where industrial and commercial registration is located.
(two) the materials needed to apply for the qualification of testing institutions.
1, qualification application form of testing institution;
2. The original and photocopy of the industrial and commercial business license or legal person certificate;
3. Qualification documents suitable for the scope of application for testing qualification;
4. List of main testing instruments and equipment, and effective proof of facilities and environment that meet the requirements of testing work;
5. A copy of the professional title certificate, ID card, labor contract, social insurance payment certificate and post certificate of the inspector, and the registered personnel shall also provide a copy of the registration certificate;
6 inspection vehicle quality management system and inspection information management system related information;
7. Test performance certification materials;
8. Other relevant materials required by the qualification standards.
Testing institutions apply for old or new qualifications in Qian Fan for the first time, and do not assess the performance of testing institutions. The application form for the qualification of testing institutions shall be formulated by the competent department of housing and urban construction in the State Council.
(3) The competent departments of housing and urban construction of the people's governments of provinces, autonomous regions and municipalities directly under the Central Government shall, within 20 working days after receiving the qualification application materials, complete the examination and make a written decision, during which the testing ability of the applicant can be verified on the spot.
(four) the qualification certificate of testing institutions is divided into original and duplicate, which are formulated by the competent department of housing and urban construction in the State Council, and the original and duplicate have the same legal effect. The qualification certificate is valid for 3 years.
(5) In case of merger, division, reorganization, restructuring, etc. of testing institutions, if it is necessary to inherit the original qualification, it shall apply to the original qualification licensing authority for re-verification of the qualification.
(6) If a testing institution that applies for additional qualification and re-verifies its qualification has prohibited acts as stipulated in these Measures within one year before the date of application, the qualification licensing organ shall not approve its application.
(seven) if the validity period of the qualification certificate expires and the testing institution needs to extend the validity period of the qualification certificate, it shall apply to the original qualification licensing authority for qualification extension 30 days before the expiration of the validity period of the qualification certificate.
Within the validity period of the qualification certificate, those who have the conditions and ability to continuously carry out the corresponding testing activities and have no prohibited acts as stipulated in these Measures shall be allowed to continue after being examined and approved by the original qualification licensing authority.
(8) If the name, address and legal representative of the testing institution change, it shall go through the formalities for changing the qualification certificate at the original qualification licensing authority within 30 days after going through the formalities for changing the industrial and commercial business license or legal person certificate. The original qualification licensing authority shall complete the formalities within 2 working days.
Detection of Huisheng institutions need to reissue or lose a replacement qualification certificate, it shall submit a replacement application to the original qualification licensing authority with materials such as replacement or loss, and the original qualification licensing authority shall complete the formalities within 2 working days.
According to the above contents, we can see that the classification and grade standards of construction engineering quality inspection qualification will change and adjust this year, and the relevant departments of various provinces and cities will also make corresponding adjustments. In addition, the supervision system and legal responsibility of engineering quality inspection will be more clear and strict.