How to wire the solenoid valve

In fact, the connection mode of solenoid valve is the simplest of all automatic control valves. Under normal circumstances, we come into contact with two wiring methods, namely, lead wire type and junction box type. How to wire the solenoid valve is discussed by Shanghai Chuannai Valve Electrical Engineering Department, workshop, sales and after-sales departments, and how to wire the solenoid valve is summarized in simple terms.

First, according to the wiring type, there are two kinds of commonly used solenoid valve wiring, lead type and junction box type, and the principle is the same. In fact, the lead type is to unplug the junction box and connect a power cord from the inside of the coil to make it integrated;

1, lead type; It is mostly used for waterproof and explosion-proof (flame-proof) type. The advantage is that the wire can be directly connected to the control system, but the disadvantage is that if it is far from the control system, new wiring will be added;

2, junction box type; At present, this connection method is the most widely used, and DIN connector is adopted, so that the control system is not affected no matter how far it is, with no interruption in the middle and no additional nodes.