HydroRanger 200 is an ultrasonic level meter, up to 6 pumps control, it also provides level measurement, level difference measurement and open channel flow function.
Siemens ultrasonic water level meter product advantages:
1. Catchment wells, weirs and nullahs level measurement
2. Built-in Modbus RTU, RS-485 digital communication interface
3. Smartlinx system and SIMATIC PDM configuration software can be used
4. Single-point or dual-point liquid level Monitoring
5. 6 standard relays
6. Automatic false echo suppression for stationary interference targets
7. Grease ring/tidal trend recording
8. Differential sensor inputs for improved signal-to-noise ratios
Siemens ultrasonic water level meter HydroRanger 200 7ML5034
Siemens water level meter HydroRanger 200 7ML5034
Siemens water level meter HydroRanger 200 7ML5034
Siemens Water Level Transmitter Siemens Ultrasonic Level Gauge: Technical Specifications
Working Mode
Measuring Principle Ultrasonic Level Measurement
Measuring Range 0.3 to 15 meters
Inputs
Modular 0 to 20 mA or 4 to 20 mA, from AC device, programmable
Digital 10 to 50 V DC point level signal (relay)
Logic 0 = < 0.5 V DC
Logic 1 = 10 to 50 V DC
3 mA max
Outputs
Echomax Transformer 44 kHz
Ultrasonic Transducers Compatible Transducers: ST-H and Echomax Series XPS-10/10F, XPS-15/15F, XCT-8, XCT-12 and XRS-5
mA Output 0 to 20 mA or 4 to 20 mA
- Maximum Load 750 Ω, Isolated
-Resolution 0.1 % of Range
Accuracy
Measurement error 0.25% of range or 6 mm, whichever is greater
Resolution Measurement range 0.1% of programmed range (programmed range is the distance from the liquid surface to the surface of the ultrasonic transducer plus the range extension) or 2 mm, whichever is greater
Temperature Compensation -50 to 150 °C
Built-in Temperature Sensor in Ultrasonic Transducer
External Thermal Transducer TS-3
Programmable Fixed Temperature Values
- Ambient Temperature (Enclosure) -20 to 50 °C
Design
Weight
-Wall Mounted 1.37 kg
-Tray Mounted 1.50 kg
Enclosure Material Polycarbonate
Cable
-Transformer and mA Outputs Signal Two-core shielded copper twisted pair cable, cross section
0.5 to 0.75 mm (22 to 18 AWG), connectable to Belden 8760 or similar.
- Maximum distance between sensor and transceiver 365 m
Display and control 100x4 mm with multi-graphic backlit LCD
Programming Programming with infrared hand manipulator or via PC with SIMATIC PDM software installed.
AC version 100 to 230V AC, ± 15%50/60 Hz, 36V AC (17W)
DC version 12 to 30V DC (20W)
9. Wall and panel mounting options
Siemens ultrasonic level meter applications:
The Siemens ultrasonic level meters are ideal for use in plumbing, municipal water supply and sewage treatment plants. wastewater treatment plants, the Siemens ultrasonic water level gauge HydroRanger 200 is an economical, maintenance-free solution that realizes the need for high efficiency and productivity to meet today's stringent standards. It offers single or dual point detection with 6 relays and has built-in Modbus RTU digital communication and RS-485 interface.
The Siemens ultrasonic water level meter HydroRanger 200 monitors open channel flow and enables state-of-the-art relay alarm and pump control functions, volume conversion. Compatible with SIMATIC PDM for PC configuration and setup. Advanced Acoustic Intelligence? echo processing software provides greater reliability for measurements.
The Siemens ultrasonic water level meter HydroRanger 200 uses Siemens continuous ultrasonic measurement technology to monitor water and wastewater of any concentration up to a maximum range of 15m with a resolution of 0.1% and an accuracy of 0.25%. Unlike other contact devices, the HydroRanger 200 is unaffected by suspended particulate matter, strong corrosion, oil and grease and drain silt, significantly reducing downtime.
The HydroRanger 200 is available in both wall-mounted and disk-mounted versions.