Beauty instrument chassis is the most important component in the beauty instrument industry, and is the necessary choice for all beauty instruments! Beauty instrument chassis is mainly divided into ABS beauty instrument chassis, fiberglass beauty instrument chassis, injection molding beauty instrument chassis!
ABS, also known as blister, is a plastic processing technology, the main principle is to spread the plastic sheet heating softens, using a vacuum adsorption on the surface of the mold, after cooling molding.
The use of vacuum molding process will be transparent plastic hard sheet made of a specific raised shape of the beauty instrument chassis, cover the surface of the product, play a role in protecting and beautifying the product, will be ordinary plastic hard surface of a layer of solute material, so that the beauty instrument chassis have a kind of solute feel, used to raise the product grade, the use of a special process of modification of the material of the suction molding pallet, the surface of the resistance of the material value is less than 10 The resistance value of the surface of the material is less than 10 to 11 times put ohm. Mainly used for electronic and IT products static tray. Blister production with the mold, the lowest cost is the gypsum mold, followed by electroplated copper mold, the most expensive is the aluminum mold, mold drilled with small holes for vacuum adsorption of the thermalization of the hard sheet, the formation of blister products.
We often talk about blister molding, using the blister molding machine will be softened by the heat of the plastic hard sheet adsorption on the surface of the mold, after cooling, the formation of concave-convex shape of the plastic.
Blister Cutting: After the plastic products of blister packaging molding, through the punching machine, will be a large sheet with a knife die into individual products.
Folding: there is a blister packaging products called plug-in packaging, the need for the three sides of the blister with the folding machine folded to the back, so that in the next encapsulation process, the card will be inserted into the folded edge, the formation of plug-in packaging.
Heat sealing: it is a kind of blister packaging process, using the sealing machine will be coated with blister oil on the surface of the paper card and the blister and together to form a blister card packaging.
High-frequency sealing: is a blister packaging process with high-frequency ultrasonic machine, the blister and blister bonded together to form a double blister packaging, and high-frequency sealing is different is that ultrasonic not only can be sealed PVC. Ultrasonic sealing can only be spaced point, and generally only one edge each time.