① Water: out of the water to see if there are valves and sampling port into the water to see if there are filters, valves and pressure gauges.
② electricity: is not AC220V, 50 ~ 60Hz. Shanghai boiler water softening equipment, Nantong automatic water softening equipment, Suzhou softening water treatment equipment, Jiading Fuleiq water softening equipment
③ salt: salt should be put into the salt tank, the amount of salt at least 2/1 of the height of the salt tank.
2, the adjustment of the softener:
① Adjustment time, Connected to the power supply after the display shows the time and cycle of water production time and cycle of water production mutual display, display time, press the up and down keys to adjust the time.
② adjust the time and press the program key, the display shows 3 digits, the number of digits is the number of cycles of the amount of water, press the up and down keys to adjust the cycle of the amount of water, the amount of water out of the more or less fixed.
③ Press the program key, the display shows the first 1 (backwash) after 3 digits, the last 3 digits indicate the number of backwash time, press the up and down keys to adjust the amount of time, generally 8 ~ 14 minutes.
④ In the press program key display shows the first 2 (salt absorption slow wash) after 3 digits, adjust the same as above 60-90 minutes.
⑤ Press the program key will successively fast wash and water injection (fast wash time from the start of the fast wash until the time of qualified water out of the sewage pipe, water injection time water to the salt tank under the highest point of 200mm is good).
3, the use of water softener:
① Keep salt, water (0.2-0.6Mpa) with electricity.
② Laboratory water qualified, such as unqualified by the manual regeneration of the water softener, after pressing the water softener will automatically go through the regeneration process (regeneration program: 1, backwash. 2, salt absorption slow wash. 3, fast wash. 4, water injection.)