Elevator inspection standards:
Installation, overhaul or transformation of the elevator to be put into use, should be in accordance with these regulations on the acceptance inspection of the contents of the inspection; in-use elevators should be in accordance with these regulations on the contents of the periodic inspection, an annual inspection.
We may affect the safety and technical performance of natural disasters or equipment accidents after the elevator, and stop using the elevator for more than a year to use again, the equipment overhaul, should be in accordance with the requirements of the acceptance test inspection.
Expanded Information:
1, the elevator is a number of specific floors serving the building, its car running in at least two columns perpendicular to the horizontal plane or with the plumb line inclined angle of less than 15 ° of the rigid track movement of the permanent transport of the equipment. There are also steps, tread plate mounted on tracks running continuously, commonly known as escalators or moving walkways. Fixed elevating equipment serving a defined floor.
2, car size and structural form to facilitate passenger access or loading and unloading of goods. Customarily, regardless of its drive mode, the elevator as a general term for vertical transportation tools in the building. According to the speed can be divided into low-speed elevator (4 m / s below), fast elevator 4 to 12 m / s) and high-speed elevator (12 m / s above).
References: