What are the advantages of thermal storage incinerator?

What is a regenerative thermal incinerator? Regenerative thermal incinerator equipment, referred to as RTO, the full name of the English Regenerative Thermal Oxidizer, Regenerative Thermal Oxidative Decomposer, also known as regenerative thermal incinerator. Its basic principle is in the high temperature (≥ 760 ° C) will be oxidized to generate organic waste gas CO2 and H2O, so as to purify the waste gas, and the recovery of decomposition of the heat released to achieve environmental protection and energy saving for the dual purpose of a kind of energy-saving environmental protection for the treatment of medium and high concentration of volatile organic waste gas device.

The main structure of RTO consists of combustion chamber, ceramic packing bed and switching valve. The regenerative ceramic packed bed heat exchanger in the device can maximize the recovery of heat energy, the heat recovery rate is more than 95%, and no or very little fuel is used when treating VOC. If dealing with low concentration exhaust gas, optional concentration device can be installed to reduce combustion consumption.

What are the advantages of the regenerative incinerator? Advantages:

●Almost all organic compounds containing exhaust gas can be processed

●Can deal with large air volume, low concentration of organic exhaust gas

●Treatment of organic exhaust gas flow rate is very elastic (nominal flow rate of 20% to 120%)

●Can be adapted to the composition of VOC in the organic exhaust gas and the concentration of the changes, fluctuations

●On the waste gas Insensitive to small amounts of dust and solid particles entrained in exhaust gases

●Highest thermal efficiency among all thermal combustion purification methods (>95%)

●Self-heating operation without adding auxiliary fuels under suitable exhaust gas concentration conditions

●High purification efficiency (three chambers >99%)

●Smaller maintenance workload, safe and reliable operation

●Smaller maintenance workload, safe and reliable operation

●Organic exhaust gases can be purified in the following ways p>

●Organic sediments can be removed periodically, and the heat accumulator can be replaced

●Lower pressure loss of the whole device

I. Advantages of incinerator:

1. It can dispose of the garbage from remote areas locally and save the cost of garbage disposal.

2, easy to move, can be placed at any time to change the location.

3, Capacity can be customized according to demand.

4, relative to the brick incinerator, more economical, more practical.

5, iron incinerator, there is heat in the incineration process, can better dry the garbage, the garbage incineration effect is better.

Second, the incinerator specifications: height 1.8 meters diameter 1.3 meters garbage capacity: 1.5 cubic meters, chimney 2 meters, diameter 22cm; garbage feed port 50 × 50cm, ignition port diameter 15cm, furnace foot high 16cm.

Third, the amount of garbage incinerated per day: a furnace garbage can be incinerated in 1 clock, remove the collection and shoveling of garbage time, at least 3 furnaces can be burned each day, that is, each day can be burned. You can burn 3 furnaces, that is, you can burn 4.5 cubic meters of garbage per day, and each incinerator can deal with the garbage produced by about 1,000-1,500 people per day.