What kind of equipment is used in the new Sanheng system? What are the specific functions?

The new three constant system should use six major equipment, respectively: intelligent constant housekeeper, ecological negative pressure fresh air machine, intelligent dehumidification fresh air machine, intelligent water mixing center, constant temperature frequency conversion coil, end constant temperature adjustment module

Intelligent constant housekeeper function:

1.host control screen function: instead of host controller, realize climate compensation, variable water temperature adjustment, multi-connected combination adjustment.

2. Centralized controller function: 3 scenarios of one-key operation, the maximum management of 90 areas, up to 255 devices.

3. IOT operation and maintenance function: 3 IOT operation and maintenance platforms, 2 APP services, real-time management of each area temperature, humidity, remote troubleshooting, remote one-key operation.

Eco-negative pressure ventilator features:

1. Aluminum-zinc-plated plate shell, beautiful and generous;

2. Inlet 75 or 90 users can be customized to be compatible with the project installation is simple and convenient;

3. Built-in muffler processing, enjoy the quiet;

4. Built-in EC full DC frequency conversion motor to achieve stepless speed regulation;

5. 5. Built-in PM2.5, CO2 air quality sensor;

6. Integration of PID air volume automatic adjustment algorithm, to ensure the air quality of the room as well as the micro-positive pressure;

7.: With the Zhiheng housekeeper intelligent on the cloud, can be controlled remotely, remote real-time data detection, remote real-time

8. Data analysis, remote fault alarm push, realize remote active The company's products and services can be used in the following ways

Intelligent dehumidifier function:

1. Appearance of the whole black matte shell, beautiful and generous, and built-in SUS304 stainless steel water tray, durable:

2. Fan using Germany Bohle EC DC inverter motor, stepless speed regulation;

3. Built-in inlet water temperature sensors, out of the water temperature sensors, inlet wind temperature and humidity sensors, Outlet air temperature and humidity sensor;

4. Integrated PID variable air volume control algorithms, according to the indoor CO2 concentration, TVOC concentration, PM25 index and other environmental indicators of the trend of changes in the automatic variable air volume adjustment;

5. Integration of PID variable flow control algorithms, control of inlet three-wire two-control valve openings, to achieve the flow rate of the variable flow rate, to control the temperature of the air, humidity, to ensure that indoor The effect of the same time also prevents condensation in the air duct;

6. Integrated primary and high efficiency filtration, to achieve H13 level filtration effect, air purification rate of 99%;

7. Built-in plasma sterilization and anion purification, according to the indicators of the indoor environment, automatically open and cycle timed to open

8. Built-in 1000W heating, to prevent the over-season due to dehumidification led to Built-in 600MM water pump and overflow float switch, not only ensure smooth drainage, but also real-time monitoring of overflow situation and timely push overflow alarm signal to ensure safe operation;

10. with Jiheng housekeeper on AUBEIDO Jiheng cloud, real-time data monitoring, real-time analysis of fault alarms, fault alarms push, realize remote active operation and maintenance services;

11. Remote active operation and maintenance service;

11. With AUBEIDO Jiheng housekeeper, remote software OTA upgrade can be realized

Intelligent mixing center function:

1. Imported inverter pump;

2. 5 million times of infinite adjustment of the three-way valve;

3. Precise temperature control, multi-point dew point algorithm;

4. Multiple fault protection, effective anti-condensation.

Thermostatic inverter coiler function:

1. DC motor, DC frequency conversion, full-stroke linear stepless speed regulation.

2. PID regulation fan, ± 0.3 degrees accurate temperature control

3. Out of the wind, back to the wind for a more quiet noise treatment.

4. ESP antimicrobial one-piece molded water tray, mold, corrosion

5. All aluminum-plated zinc plate shell, beautiful, not rust.

6.20CM ultra-thin design, supplemented by 700MM high head lifting pump

7. Temperature difference control condensate pump, with overflow switch, more secure longer life.

8. Dual 485 communication connection makes installation easier.

9. Open control system.

The end thermostat regulator module is divided into: waterproof hammer regulator valve and area controller

Waterproof Hammer Regulator Valve:

1. The combination of AUBEIDO area controller and waterproof hammer valve realizes the variable flow rate regulation of the waterproof hammer valve to achieve the precise temperature control of the room, which will bring you the comfort of the real water system.

2, waterproof hammer valve also effectively eliminates the water hammer whistling noise due to the pump head is too large, resulting in the closure or opening of the two-way motorized valve at the end of the water hammer

Area controllers: there are mirrors and a full capacitive touch screen 2 area controllers:

1, with RS485 communication, the original imported temperature and humidity chip

2, the management of a variety of equipment: air conditioning hot and cold, Thermostat hot and cold, fresh air, floor heating, dehumidification seven modes of free switching.

3, with temperature and humidity, PM2.5, carbon dioxide, VOC display

4, with low-temperature anti-freezing protection, with power failure memory function, the screen can be always dark

5, with the temperature and humidity, PM2.5, carbon dioxide, VOC display

6, with low-temperature anti-freezing protection, with power failure memory function, the screen can always dark