1, remove the outer packaging
2, the correct placement of the sterilizer. In order to make sterilization can work properly, the sterilizer must be placed on a sturdy horizontal surface.
3, add 3.5L of water in the sterilizer, each time after the application of the appropriate amount of water must be added to avoid lack of water and burn the electric heating tube.
4, will be ready to need sterilization items, into the sterilizer, packages and packages should be left between the gap to ensure air penetration. Well cover the lid, tighten the screws.
5, check the type of power supply, to determine the use of specifications match. Then one end is plugged into the sterilizer plug, the other end is plugged into the power outlet.
6, pay attention to observe the pressure gauge pressure indication or temperature indication. When the steam pressure rises to about 0.165Mpa, the safety valve is automatically work, when the pressure falls back to about 0.142Mpa, the safety valve is automatically closed to maintain constant pressure.
7. After the sterilization is finished, pull out the plug first to stop heating. Then turn on the release of steam to release steam, must wait until the pressure gauge pointer back to zero before you can open the lid to discharge the remaining steam.