I. Dental clinic decoration design method
1. Dental clinic decoration design, the treatment room is the most important place in the dental clinic, it is also the area of medical equipment operation. Therefore, we must be careful when decorating. In order to improve the treatment rate, the clinical design should consider the treatment effect, the size of the surgery, and the equipment. In the design of the clinic space, it is of utmost importance to use semi-open compartments to differentiate each treatment space and to respect the privacy of each patient.
2. Dental clinic decoration design, disinfection room is also very important, pollutants and sub-pollutants must be separated in the disinfection room decoration, disposable supplies should be initially disinfected after treatment, and then sent to a special department for recycling. Sterilization equipment for handpieces and equipment: it should include washing machines, maintenance oil jugs, mounting and sealing machines, autoclaves, etc. The environment of the disinfection room: it should be bright, fitted with ventilation, dust extraction, air disinfection, provision of an indoor swimming pool and sewerage, which should be connected to the sewage treatment station. These are the things we must pay attention to and strict compliance.
II. What to look for in a dental clinic renovation
1. What to look for in a dental clinic renovation is that the dental clinic must be big enough, and also to make the staff and patients feel comfortable after the renovation. The design of the dental clinic must conform to the layout plan prescribed by the local health board. Currently, all regional health boards require that every dental clinic be equipped with restrooms, sterilization rooms, enclosed medical waste rooms, dental x-ray rooms, etc.
2. Dental clinic renovation note that dental clinics must also be equipped with a dental mold laboratory, but there are some small dental clinics that use external processing and therefore do not need to set up a dental mold laboratory. If the dental clinic is going to process its own dental appliances, then the dental clinic will need to have a relatively spacious dental mold lab, which will need to have water and sewage. The lower hose should be made of thicker pipe so that the plaster material can be rinsed more easily.
3. Dental clinic decoration note that the dental clinic should be equipped with a number of common spaces suitable for dental treatment, such as waiting room, open treatment area, single treatment room, etc. Most large dental clinics will use a single treatment room.
4. Dental clinic renovation note is that in the design and design of the sterilization area of the dental clinic, should be selected according to the needs of centralized or decentralized management. Since the sterilization and re-supply area is the center of the clinical work terminal, it should be placed in a central location and should be fully equipped to sterilize and re-stock all instruments.
5. Dental clinic decorations note that sterilization areas should not be dispersed in more than one location if the decor is designed for fewer than 10 dental clinics with less than 10 treatment areas. Sterilization areas should be placed in a central location and no waste should be wasted pre-setting up sterilization centers. Due to the small size of the dental clinic, it is usually not a good cost-benefit ratio for full-time sterilization aids.
Dental clinic renovation and design, do not know what are the methods, and what to pay attention to when renovating, the above article is about the dental clinic renovation and design methods and what to pay attention to when renovating the dental clinic.