See if you can connect directly with the following pins. Really can't. There is one at the bottom. You can contact them. However, you should pay attention to the authenticity yourself.
Second, the standard 15 pin VGA display interface definition
1 red red component signal
2 green green component signal
3 blue blue component signal
4 Not applicable
5 GND ground wire
6 GND R red component ground wire
7 GND G green component ground wire
8 GND B blue component ground wire
9 +5V power supply (not used)
10 GND ground wire
1 1 Not applicable.
12 SDA serial data signal
13 horizontal synchronization (line synchronization)
14 V SYNC vertical synchronization (field synchronization)
15 SCL serial clock signal
Three. Introduction to the use of 8208
ED-8208 XRGB box can convert all kinds of RGB signals into VGA signals, and can be directly connected to LCD monitors, CRT monitors, projectors, LCD TVs, rear projectors and other equipment. Easily replace your original display system with good image quality, clear image and stable performance. Widely used in various industrial control equipment (such as CNC machine monitors, imported DCS monitors, injection molding machines, analytical instruments, navigation, imported production line monitors, medical equipment, airport railways, financial equipment monitors, special specifications monitors, imported game machines, bowling and other entertainment facilities monitors, etc. ).
ED-8208 RGB to VGA RGBHV to VGA
1, automatic identification of synchronization signal and resolution.
Supported signal sources: RGB SOG (green synchronization)
RGB SOB (blue synchronization)
RGB SOR (red synchronization)
Compound synchronization
RGBHV (separation synchronization)
Supported resolutions: 640 * 480
800*600
1024*768
1280* 1024
1600 * 1200 and so on.
Lower panel: it is a signal input interface, five BNCs * * and a switch button K 1.
V: field synchronization signal.
H: It is a line synchronization signal or a composite synchronization signal.
R: red signal, or red synchronization signal.
Green signal, or green synchronization signal.
B: Blue signal, or blue synchronization signal.
K 1: synchronous reset button.
RGB to VGA, RGB to VGA, RGBCS to VGA, RGB+C synchronous to VGA, RGBHV to VGA, EGA to VGA, CGA to VGA, BNC to VGA, 3-pin to 15 pin, 9-pin to 15 pin monitor.
RGB/VGA, RGB/VGA, RGBCS/VGA, RGB+CSync/VGA, RGBHV/VGA, EGA/VGA, CGA/VGA, BNC/VGA, 3-pin/15-pin display.
RGB HD VD, nine heads to fifteen heads. DB9 to DB 15, 8-pin display, 8-pin to 15. Green synchronization to VGA, composite synchronization to VGA, and separate synchronization to VGA.
RGB/VGA converter, RGB/VGA conversion card, RGB/VGA converter, RGB/VGA conversion card.