SolidWorks referred to as (SW) is a new generation of Dassault introduced for the electrical industry design of mechanical 3D design tools. SolidWorks Chinese version of the use of a new parallel and serial product development environment and *** enjoy the 3DCAD model, and is widely used in the design of parts, the design of machinery and equipment, medical equipment, automotive, aerospace and other industries; SolidWorks can meet the user directly add a variety of auxiliary plug-ins, connected to a variety of NC programming software and directly print the model use requirements. Industry; SolidWorks can meet the user directly in the software to add a variety of auxiliary plug-ins, connect a variety of NC programming software and directly print the model of the use of demand. About the power of solidworks, in fact, I believe that many partners also have a certain understanding, but for the mastery of the software as well as the use of the software, may be a lot of partners are still scratching their heads! It doesn't matter, if you want to learn how to use solidworks, you've come to the right place. A wealth of solidworks boutique video courses, take you one by one to break through the software basic to advanced operation
solidworks popular video tutorials recommended:
Software: Solidworks Mechanical Design introductory to master course
Interior Design: Solidworks engineering design to explain the chapter tutorials
Interior Design: Solidworks engineering design to explain the chapter tutorials
Introduction to software: the use of Solidworks measurement tools
SolidWorks to draw three parts, assembled into a massager
This figure with SolidWorks2019 version of the modeling, rendering with KeyShot9.0 (the above two pictures). SW original file has been shared, contains X_T format (this format) You can open it with lower versions of software, but you can't see the features), in the Today folder.
01 Part 1: Roller
1. Draw an octagon on the front view datum to add horizontal geometry relationships.
2. Stretch the cam to a given depth: 20.
3. Sketch on the blue surface and convert the solid to reference the blue surface.
4. Stretch the cam to a given depth: 10, and draw angle: 60 degrees.
4. Circumferential array array direction: blue round edge line, quantity: 8.
5. Linear array entity, array direction: select a border line; spacing: 20, quantity: 10.
6. Combination.
7. Add appearance, save the part and finish.
02Part 2: Handle
1. Draw a spline curve in the front view datum.
1-1. Tangent weight of top control point, left: 158, right: 60. (Can be modified when not labeled.)
1-2. Equidistant: 10, bi-directional, top capping - arc. (Convert intermediate spline curve to construction line)
2. Stretching camber symmetry on both sides: 20.
3. Fillet radius: 5.
4. Drawing a circle in the right view datum.
5. Stretch to remove symmetry on both sides: 250.
6. Add appearance and save.
03 Part 3: Shaft
1. Stretch the tab to draw a circle in the front view datum, symmetry on both sides: 250.(Save the part)
Assembly
1. Create a new assembly to insert the three parts, first insert the handle, it will be fixed by default.
2. Add concentric fits to the shaft and rollers.
3. Select the four end faces of the two parts and add a width fit.
4. Add an overlap fit to the rounded edge line of the shaft and the rounded edge line of the handle.
5. Finish.
6. Simple rendering:
So, today's "SolidWorks draw three parts, assembled into a massager" on the end of sharing here! We must learn to see more, more practice, more thinking, more learning, I hope we can learn solidworks! Here, but also to provide you with more courses to learn, click the link: