What does system certification include

Common system certification \x0d\ a, ISO9001 quality management system \x0d\ ISO9001 standard is a put all the things, it is not that the 9000 standard is how much omnipotence, but because the 9001 is a basic type of standard, is the essence of the Western quality management science, because the production-oriented enterprises applicable, service industries, intermediary companies, sales Companies and so on are also applicable. Because preaching quality is all ****common. \x0d\2, ISO14001 environmental management system \x0d\ISO14001 environmental management system certification applies to any organization, including enterprises, business and related government units, through the certification can prove that the organization in the environmental management of the international level, can ensure that the enterprise processes, products and activities in the control of various types of pollutants to meet the relevant requirements, to the enterprise to set up a good The social image of the enterprise. \x0d\\\\x0d\\ through the implementation of environmental management system implementation, from the root to achieve pollution prevention and continuous improvement, at the same time can promote the enterprise to develop cleaner products, the use of cleaner technology, the use of efficient equipment, the rational disposal of waste process, through the control of the consumption of a variety of resources, to optimize its own cost management. \x0d\3, ISO45001 Occupational Health and Safety Management System\x0d\ISO45001 is an international standard for the validation of safety and health management systems, and is a new version of the original Occupational Health and Safety Management System (OHSAS18001), which aims to reduce and prevent the loss of life, property, time and damage to the environment due to accidents through management. \x0d\ We usually refer to these three systems, ISO9001, ISO14001 and ISO45001, together as the Three Systems (also known as the Three Standards). These three system standards are applicable to a wide range of industries. \x0d\4, GB/T50430 engineering construction quality management system \x0d\ all engaged in the construction of waterproofing, anticorrosion and insulation works, building renovation and decoration works, fire protection facilities engineering, building curtain wall engineering, electronic and intelligent engineering, municipal utility engineering, petrochemical engineering, mechanical and electrical engineering, building mechanical and electrical installation works, environmental protection engineering, steel structure engineering, construction of building engineering and other construction qualification Related construction engineering enterprises, all must have the appropriate qualification certificate, which includes the GB/T50430 building construction system. \x0d\ V. ISO27001 Information Security Management System \x0d\ I. Industries that use information as a lifeline: 1, financial industry: banking, insurance, securities, funds, futures, etc. 2, communications industry: telecom, Netcom, mobile, Unicom, etc. 3, purse-skinning companies: foreign trade, import/export, HR, headhunters, accounting firms, etc. \x0d\ II. Industries with a high degree of dependence on information technology: 1 , steel, semiconductors, logistics 2, electricity, energy 3, outsourcing (ITO or BPO): IT, software, telecommunications IDC, call centers, data entry, data processing processing, etc. \x0d\ Third, the process technology requirements of the competitors aspire to get: 1, pharmaceuticals, fine chemicals 2, the introduction of the information security management system of the research institutions will be able to coordinate the management of all aspects of information management, so as to make management More effective. Ensure information security is not just a firewall, or find a 24-hour information security services to provide the company can be achieved, it requires comprehensive integrated management. \x0d\6, ISO20000 Information Technology Service Management System \x0d\ISO20000 is the first international standard on the requirements of the IT service management system, which adheres to the concept of "customer-oriented, process-oriented" and emphasizes the continuous improvement of IT services in accordance with the PDCA (Deming Quality) methodology. Organizations more than the provision of IT services. Its purpose is to provide a model for establishing, implementing, operating, monitoring, reviewing, maintaining and improving an IT service management system (ITSM). ISO\x0d\20000 certification is suitable for IT service providers, either internal IT departments or external service providers, including (but not limited to) the following categories: 1. IT service outsourcing providers 2.\x0d\IT system integrators and software developers 3. Integrators and software developers3.\x0d\ internal IT service providers or IT operations support departments\x0d\ VII.\x0d\ ISO22000 Food Safety Management System\x0d\ISO22000 Food Safety Management System Certificate is one of the required certificates for feed processing, primary product processing, food production, distribution, storage, and catering industries. It is also used as a standard basis for second party audits by organizations of their suppliers. \x0d\VIII, HACCP Hazard Analysis and Critical Control Point system \x0d\HACCP system is a preventive food safety control system to assess the hazards that may occur in the food processing process, and then take control. It is mainly for food manufacturers and targets the hygiene and safety of the entire process of the production chain (responsible for the safety of consumers' lives). Although ISO22000 and HACCP systems are both categorized under food safety management, there is a distinction in the scope of application: the ISO22000 system applies to food and its related industries, while the HACCP system can only be applied to food and closely related operational aspects. \x0d\9, IATF16949 automotive quality management system standards \x0d\9 suitable to do IATF16949 system certification of enterprises include: cars, trucks, buses, motorcycles and parts, accessories manufacturers. Not suitable to do IATF16949 system certification of enterprises are: industry (forklift), agriculture (minivan), construction industry (engineering vehicles), mining, forestry and other vehicle manufacturers. Mixed production of enterprises, only a small number of products are provided to automobile manufacturers, can also do IATF16949 certification. All management of the company should be executed according to IATF16949, including the technical aspects of automotive products. If the production site can be distinguished, only the automotive product manufacturing site can be managed according to IATF16949, otherwise the whole factory must be executed according to IATF16949. The mold product manufacturing plant, despite being a supplier to automotive supply chain manufacturers, the products supplied are not used in automobiles and therefore cannot apply for IATF16949 certification. Similarly, there are products related to automobiles after transportation suppliers and automobile sales. \x0d\10, ISO13485 medical device quality management system \x0d\ISO13485 Chinese called "medical device quality management system for regulatory requirements" \x0d\ due to the medical device is to save lives, prevention and treatment of disease and illness of the special products, only according to the ISO9000 standard of the general requirements to regulate Is not enough, for this reason ISO organization issued ISO13485: 1996 version of the standard (YY/T0287\x0d\ and YY/T0288), the quality management system of medical device manufacturers put forward special requirements for the quality of medical devices to achieve the quality of safe and effective to play a very good role in promoting. \x0d\ Applicable to: medical product manufacturers and service providers that fulfill the requirements of international, European and national laws and regulations, and enterprises that wish to implement a documented management system according to this standard. Companies that develop, manufacture and sell medical devices and want to demonstrate their competitiveness and performance capabilities in international, European and national markets. Suppliers and other service providers within the value-added chain must ensure that their products are consistent with customer requirements. \x0d\11, After-sales Service Certification for Goods \x0d\ Applicable to: enterprises that manufacture tangible goods, enterprises that sell tangible goods, and enterprises that provide intangible goods (services). Commodities are products that enter the field of consumption. Commodities include intangible services in addition to tangible products. Both industrial and consumer goods are commodities. Tangible goods have external form and internal quality as well as promotional components, such as quality, packaging, branding, shape, style, color tone, culture, etc. Intangible goods include labor and technical services, such as financial services, accounting services, marketing planning, creative design, management consulting, legal consulting, and programming. Intangible goods generally occur with tangible goods and also with tangible infrastructure, such as airline services, hotel services, beauty services, etc. Therefore, production, trade and service enterprises can apply for the certification of after-sales service of goods. \x0d\ twelve, CMA inspection and testing organizations accreditation \x0d\ qualification \x0d\ qualification \x0d\ CMA is the inspection and testing organizations accreditation mark, by the ChinaInspectionBodyandLaboratoryMandatoryApproval of the acronym CMA. The logo is shown below:\x0d\ CMA is generally approved by the Market Supervision Administration of municipalities directly under the central government of each province.