1. In the past, environmental protection procedures were handled, and now the current environmental protection standards are strictly implemented;
2. voc produced by gluing should be collected and discharged up to standard, and voc produced by gluing should be collected;
3. Wood waste gas should also be collected and treated centrally, and discharged up to the standard;
4. Particulate matter emission is10ug/m3; Factory formaldehyde 0.2mg/m3, must meet the emission standards;
5. The chemical oxygen demand of wastewater is less than 50mg/m3; ;
6. Rubber residue is a dangerous chemical, which should be handled safely and be responsible for the public's own safety;
7. Waste water is not allowed to be discharged into sewer pipes, nor is it allowed to be discharged by drilling wells. The waste water, waste gas and hazardous solid waste produced by enterprises must match the production capacity, that is, how many products are produced corresponds to how much pollution is certain;
8. The production workshop shall be closed, the pavement of the workshop in the factory area shall be hardened, the roads, wastes and warehouses shall be cleaned, and articles shall not be stored in the open air. If the hazardous solid waste exceeds 3 tons, the person in charge of the enterprise will go in directly, and there is no discussion;
9. Recently, enterprises should be issued with pollution discharge permits. Production is not allowed without a license, and enterprises will calculate how much pollution they emit;