1, the operator must be trained and qualified to operate.
2, the operator on duty must wear good labor protection products to prevent electric shock, burns, arc light injury to the eyes and mechanical damage.
3, the welding site should maintain a good safety environment, there are objects that hinder the safety to clean up and pay attention to fire, explosion, dust and ventilation.
4, before going to work to check whether the welder is normal, to the lubrication point in accordance with the provisions of the oil lubrication, in order to maintain the flexibility of the moving parts.
5, after checking no problem, according to the welding mode and welding process to adjust the equipment for welding.
6, weldments should be lifted to pay attention to safety, to be put lightly, the position should be put correctly.
7, a variety of different welding methods should be operated in accordance with the provisions of the manual.
8, the welding process should always pay attention to the flexibility of the action of the travel switch, mechanical protection block is loose and damaged, found that the problem should be promptly reported to the production manager disposed of.
9, when adding flux to the funnel, be careful not to spill flux to the drag plate screw and guide column, so as not to accelerate the wear and seizure, if there is a spill must be cleaned up in a timely manner.
10, the end of the work to disconnect the power, clean up the scene, and clean up the dust on the guide, screw and nut movement parts.